10" Sand Filter 1/3HP Pool Pump,2640 GPH High-Flow,Sand Filter Pump for Above Ground Pool,for Pools Up to 10000 Gallons

Descripción

Product description Product Parameters: Pump Horse Power:1/3 HP Voltage:110V 60HZ Water Flow:2640 GPH Max Water Capacity:10000 Gallons Sand Capacity：22 Pounds Sand Type Required: #20 silica sand Tank Volume:14L ZBPRESS 10" Sand Filter Pump System This product is designed to filter water from above ground pools with a household common 110V/60Hz. The 10 inch filter and 1/3 hp pump have the capacity to handle 10,000 gallons of pool water with excellent filtration. Easy to install and use. The ideal home pool water filtration equipment. Specificities: Easy to assemble Good filtration effect Powerful pump motor, low noise Easy to clean Reliable quality and durability Easy Maintenance and Quickly Clean 1/3HP hight effiency pump ensures the lower system cost and quiet operation. 10in filter tank holds 22 lbs. of sand, can be simply filled and cleaned. 5-Way Multiport Valve filter/drain/shut off/backwash/wash Functions that will allow you to keep your pool clean at all times! Safe, Reliable and Durable Quality The whole set is made of reinforced thermoplastic shell, portable, corrosion-resistant, with durable, all-weather performance, serving to enhance clean water quality. There are three different ways to identify when the filter needs backwashing. 1·The most accurate indicator on pool systems with a flow meter is to backwash when the flow decreases 30%from the original (clean filter) flow. For example, if the original flow was 60 GPM, the filter should be backwashed when the flow is reduced by about 20 GPM (or 30%) to 40 GPM 2.A more subjective and less accurate indicator is to observe the amount of water flowing from the flow directionals located in the wall of the pool.The filter should be backwashed once it is detected that the flow has been reduced. 3. The most commonly used but less accurate indicator is to backwash when the filter gauge reading increases 10 PSI over the initial(clean filter) reading. It is important not to backwash the filter solely on a timed basis such as every three days. It is also important to note that backwashing too frequently actually causes poor filtration.Factors like weather conditions, heavy rains, dust or pollen,and water temperatures all affect the frequency of backwash. As you use your pool, you will become aware of these influences. To prevent damage to the pump and filter and for proper operation of the system, clean pump strainer .

Características

• POWERFUL ABOVE-GROUND POOL FILTRATION: This sand filter pump for above ground pools comes in a package that includes a 10" one piece tank with a 45 lb. A high-flow 1/3 HP pump with a maximum water flow of 180 L/min, which can filter up to 10,000 gallons of above ground pool.
• 5-WAY VALVE SAND FILTER PUMP: Our above ground pool filter with pump has multiple modes of use.By operating the 5-position rotary valve, you can filter/drain/shut off/backwash/wash.
• HIGH QUALITY: The water tank is a one-piece thickened polyethylene tank, sun-resistant, wear-resistant and corrosion-resistant. Efficient and low-noise water pump with its own collector, energy-saving and durable. Easy to check the filter through the transparent sealing cover.
• EFFICIENT PERFORMACE AND LOW NOISE DESIGN: The above ground pool sand filter is rotated by an internal device to push particles out of the water and discharge them, with a separation efficiency of 96% to 98%.The high flow speed motor makes the machine stable and relatively quiet in operation.
• WIDE USE : This pool sand filter system works well in swimming pools, landscape pools, SPA pools, support pools.It can effectively remove insoluble solids, suspended matter and particulate matter from the water and keep the pool water clear.

Especificaciones