220VAC 100A Regulador de voltaje monofásico Módulo controlador de potencia SCR Tiristor Relé de estado sólido 0-10V 4-20mA 1-5V Control de potenciómetro

Descripción

Product description Single-Phase Fully Isolated SCR Module for Temperature Control SCR Single Phase Fully Isolated Integrated AC Voltage Regulator Module regulates output power by varying the voltage across the load. 1. No external synchronizing transformer or external input 12V DC power supply is required. Very easy to use. 2. Supports 4-20mA, 0-5Vdc, 0-10Vdc, 1-5Vdc, O-10mA and other input automatic control methods, also can be manually controlled. Wide range of input regulation, high precision output regulation, good three-phase symmetry, and strong anti-interference ability. Note: The voltage regulator module is only applicable to resistive loads, such as electric heaters. Motor is not applicable Translated with DeepL.com (free version) Features of AC voltage regulation (Built-in trigger power SCR regulator) Protective Covers Protective cover for safety Supports multiple signal control Multiple signal options for ease of use High-strength heat dissipation base plate Flat base plate for good heat dissipation and longer life span Fully Isolated Regulator Module Full isolation protection, safe to use 4-20mA Control Mode As shown in the figure, 4-20mA analog signal of temperature control meter can be accepted, and the input impedance between 4-20mA end and COM end inside the module is 250Ω 0-10vdc Control Mode As shown in the figure, it can accept 0-10Vdcanalog signals of PLC, etc. The input impedanceof 0-10Vdc end relative to COM end inside themodule is greater than 15K. When this mode isadopted, the+5V end and COM end are shorted.and 0-10vdc control end enters by way of 0-5Vdc Control As shown in the figure, it can accept 0-5Vdcanalog signals of single chip microcomputer,the positive pole ofinput control is connectedto 0-5V terminal, and the negative pole isconnected to COM terminal. The input impedancebetween 0-5V terminal and COM terminal insidethe module is greater than 30KΩ Manual Control Mode of Potentiometer As shown in the figure, the higher the voltageat the adjustable terminal, the greater themodule output+ The 5V voltage is generatedby the module itself and does not need to beprovided externally. lt is only used in conjunctionwith the manual potentiometer, not for otherpurposes. The selected potentiometer resistanceis 10KΩ Aigoodele Power SCR Regulator Module Specification Type SCR-1 220V Current 10A 25A 40A 60A 80A 100A 120A 150A 200A optional Input Voltage 220VAC Regulator adjustment range 0-220V Operating Temperatures -10~60 ℃ Note This product cannot be used in inductive loads (such as motor) Regulator Module Installation and Current Selection regulator three phase voltage size Product size 105mm*72.5mm*43mm 4.13in*2.85in*1.69in mounting hole Fixing method Screw fixing (m4) Size: 92mm*48mm 3.62in*1.89in Requires heat dissipation during use Voltage regulator module is a semiconductor module, it is best to support the use of heat sink fan to enhance heat dissipation. Fully Isolated Regulator Module Instructions Fully isolated regulator modules have become the solution of choice for temperature control in industrial heating applications in a multitude of industries, including glass, plastics and semiconductor manufacturing. Recommended power is 20kw or less, and needs to be matched with a radiator fan to be used together. If the load power is more than 20kw, you can choose the power regulators or SCR power controllers. Special instructions 1. Resistive load means: incandescent lamp, resistance wire, oven, heating rod. 2. Resistive loads with large changes in thermal resistance, such as silicon-carbon rods, silicon-aluminum rods, platinum Pt, graphite than the selection of inductive loads of a larger grade. 3. Can not use the load: household appliances (such as television sets, computers), electrical appliances with switching power supply. Can not be used inductive loads such as: transformers, line country, fan motors, pump motors. 4. Can not be unloaded. Voltage Regulator 380V 3-Phase Module Wiring (Suitable for star or delta loads) Precautions for Selection and Use of Voltage Regulator Modules Selection should take into account the fluctuation of the grid voltage, the influence of the instantaneous current of the load during startup, the ambient temperature, heat dissipation conditions and other factors. It is recommended that the rated current of the module should be 3-4 times of the rated current of the load. The module can't output large current under small conduction angle (high input voltage, low output voltage) for a long time, otherwise the module will be seriously heated or even burned. It is recommended to adjust the output voltage of the module to a larger conduction angle than 1/2 of the input voltage. When the load exceeds 10A, a heat sink must be installed; when the load exceeds 40A, a forced air-cooled or water-cooled heat sink should be installed.

Características

• SCR 220V 100A is designed for Single-phase power and voltage regulator control
• It can be used in power regulators, thyristor power supplies, electric heating furnace temperature control and other equipment.
• Input signal: DC0-5V, DC0-10V, 0-10mA, 4-20mA, 10K potentiometer adjustment
• SCR is a voltage regulator, SSR is an on/off switch

Especificaciones