3L Brake Bleeder Kit, One Person Vacuum Brake Fluid Bleeder Kit | Universal Vacuum Brake Bleeder Connect Air Compressor (40-170PSI), Brake Fluid Bleeder Kit with 1L Bottle, Clean & Efficient

Descripción

Product description The 2L brake bleeder bottle is a sealed design and the top cap cannot be unscrewed. If forcibly unscrewed, the vacuum device cannot be formed. Tips: Precautions during operation: 1. Do not unscrew the 2L brake bleeder bottle! The 2L brake bleeder bottle is a sealed design and the top cap cannot be unscrewed. If forcibly unscrewed, the vacuum device cannot be formed. 2. When cleaning the 2L brake bleeder bottle, you can pour water through the mouth of the jar and then pour it out. Do not unscrew the lid. If the 2L reservoir is unscrewed, the rubber ring will be damaged, resulting in air leakage when used again. 3. Brake bleeder pumping device, since the pressure inside the device is much less than the outside atmospheric pressure. If the pump is suddenly turned off, the oil in the pump will be sucked back into the device. 4. Make sure that there is no pressure left inside the device. The air pressure can be released using the release valve pressure release by pulling the trigger. To lock on during quick release: requires pull the trigger to start bleeding. Brake bleeder kit unit can be widely used in cars, motorcycles. Hope that the updated design of our device can bring more convenience to your life! Step 1: (1) Remove the cap of the master cylinder reservoir. Insert the end of the extract tube into the master cylinder fluid reservoir, then turn the Air Valve on, and extract the old fluid. (2) Most important tip: The 2L brake bleeder bottle is a sealed design and the top cap cannot be unscrewed. When cleaning the 2L reservoir, you can pour water through the mouth of the jar and then pour it out. Step 2: (1) Use a rotating clamp to fix the replenishment bottle. Fix the bottle on the vehicle brake fluid reservoir and manually twist the on/off valve to control the flow/stop of brake fluid. Brake fluid begins to flow from the replehishment bottle. (2) Using a 1L refilling bottle to replenish the oil. Fill the refill bottle with new brake fluid. Make sure the refilling bottle is in the closed position. (3) Making sure that no old fluid or dirt remains in the tank. Empty the tank when not in use. Step 3: (1) Connect com press ed air 40-170 psi by the nipple attached to the air compressor. Connect the 2L brake bleeder bottle. Use the box-end wrench, loosen/open the bleed screw, then begin pull the trigger. (2) If the compressor power is too high, the brake bleed kit cannot work properly. Note: Please making sure that all connectors are tightened before using. You need to have your own compressor and brake bleed kit to use together. Step 4: (1) Old brake fluid is extracted out and new brake fluld is filled at the same time. Keep bleeding until seeimg new brake fluid（ the color is ligher and cleaner ) being extracted out. (2) Start with the tire farthest from the reservoir and work up to the nearest tire. Repeat the process on each wheel in turn. Check the level in the refill bottle periodically during the complete brake fluid change. Brake Bleeder Kit ’s Package Includes: 1 x 2 L Brake Bleeder Bottle 1 x 1 L Refilling Bottle 16 x Bleed Screw Adapters 1 x User's manual (Our product is currently undergoing updates. The new version now includes a comprehensive user manual, while the older version only came with a parts list. ) Material Hose: Silicone Hose Material Adapters: Rubber Adapter The 2L brake bleeder bottle is a sealed design and the top cap cannot be unscrewed. If forcibly unscrewed, the vacuum device cannot be formed or reinstalled. Average Air Consumption: 2 CFM Working Pressure 40 to 170 PSI Air Inlet 1/4 in. NPT Temperature Range -19°C to 60°C (-2.2°F to 140°F)

Características

• One Person Operation: This one person brake bleeder vacuum pump kit features a large 2L fluid reservoir and 1L brake bleeder refill bottle for easy bleeding of hydraulic brakes and clutches. This pneumatic brake bleeder is designed for one-person operation, keeps extracting oil continuously, efficiently and quicker
• Quieter Work: The power brake fluid bleeder kit features a built-in silencer for a cleaner working environment and quick brake maintenance. Crafted from durable materials for long-lasting performance, this kit ensures efficient and quieter brake bleeding
• Convenient Design: Brake fluid bleeder kit contains a variable thumb throttle which maintains average air flow. Keeps extracting oil continuously, efficiently and quicker. The brake bleed kit allows for bleeding and flushing of hydraulic brakes and clutches under vacuum conditions
• 2 Silicon Bleed Hoses: The brake flush kit includes a 59 inch silicone bleed hose with a universal rubber adapter. And a 45 inch master cylinder evacuation hose especially for bleeding brake in master cylinder. Inlet air pressure: 2.8-12 bar (40 -170psi). Come with 16 pieces bleed screw adapters fit most models
• Vehicle Maintenance Tool: Enables quick, one-step oil changes for optimal brake performance. Note: Please read the instruction manual thoroughly before use to ensure proper operation

Especificaciones