46491600 Conjunto de motor de compuerta de ventilación GVD-RAM PL compatible con controles de campo 46491600 Motor de compuerta de caldera, dispositivos de compuerta de ventilación motorizados para combustión a gas

Descripción

Product description GVD-RMA PL Vent Damper Motor-46491600 Compatible with Field Control Vent Dampers. How The GVD-RMA PL Vent Damper Motor Works？ The Vent Damper works automatically to allow natural draft during appliance operation while preventing residual appliance heat and conditioned air from escaping during off cycles. It also prevents the infiltration of cold air during down drafts. When there is a call for heat, the motor is energized, rotating the damper 90 degrees to an open position. Opening and closing takes approximately 15 seconds. When the damper is fully open, the burner is allowed to fire and flue gases pass freely through the vent. When the thermostat is satisfied, the burner stops, and the damper automatically closes, preventing air flow through the vent. What Boiler Damper Models Are Compatible? Compatible with Field Control Vent Dampers ：GVD-4PL, GVD-5PL, GVD-6PL,GVD-7PL, GVD-8PL, GVD-9PL, GVD-10PL, GVD-12PL.Operates with Gas boiler 24 VAC, 60hz intermittent ignition and standing pilot ignition systems.Please check with your boiler manufacturer to ensure the 46491600 Boiler Damper Motor is compatible with your boiler model before purchasing. Advantages Of Boiler Damper Motors Quick Installation Easy to install, just connect the wiring harness and damper control lever properly. Durable Construction Made from lightweight and durable plastic, the motor is chemically stable and non-corrosive. Save On Replacement Costs Instead of replacing the entire boiler damper, you can just replace the motor, which will help you save nearly half the cost. What Do I Do While Waiting For The Package To Arrive? When the boiler is inoperable simply because the motor has been damaged,you can turn the motor button to "hold open" mode and thenuse a pair ofpliers to manually rotate the con-rod to allow the damper to open. After opening the damper manually, when the boiler goes out,the damper cannot close automatically, which can result in some heat loss. Technical Specification Voltage 24V AC Power 4.5W Operation 50Hz 80ma Housing material Plastic Motor type Synchronous motor Switch Life 10000 Cycles Part Number 46491600 Compatible Boilers Gas Boilers

Características

• Motor de compuerta de caldera GVD-RAM PL: 46491600 El motor de compuerta de caldera es un sistema de control importante para el escape de compuerta de caldera de gas, que controla la apertura y el cierre de la compuerta al recibir señales del termostato de la caldera para minimizar la pérdida de calor.
• Easy installtion: 46491600 Vent damper motor is very easy to install, just need 2 screws and connect the wires to install it.
• Save money: It doesn't require you to replace the whole boiler damper, just replace the damaged motor, which saves you a lot of money.
• Damper motor: The working voltage is 24 Volt AC 60 Hz 80 Ma, note that before installing, please make sure the damper is matched with the motor and control the damper in the right position during installation to avoid damaging the motor and the blades.
• Compatibility: Compatible with Field Control Vent Dampers: GVD-4PL, GVD-5PL, GVD-6PL, GVD-7PL, GVD-8PL, GVD-9PL, GVD-10PL, GVD-12PL, Replacement of Gas Vent Damper Motor Assembly.Operates with all 24 VAC, 60hz intermittent ignition and standing pilot ignition systems.
• After-sales service: If you encounter any problems in use, please feel free to contact us, we will provide perfect return and refund service.

Especificaciones