(6-Pack) Large Drawer Configurable Width Dividers compatible with Akro-Mils Plastic Storage Craft Cabinets, (Dividers Only)

Descripción

Product description Bin Divider Key Features: Optimize Available Space Our dividers are the only kind on the market to allow flexible division of your bins between 2 and 12 compartments, allowing you to make the best use of your available space. No Cutting Required The storage bins come with some dividers but they must be cut out of the back, taking time and weakening the frame. Ours come in a sheet but require no cutting, simply bend them back and forth once or twice to snap one off when needed. No Peeling Required Acrylic dividers currently being sold all require the protective paper to be peeled off each piece. Our dividers do not have this, saving you a headache and significant time. High Strength Fiberglass Made of high strength fiberglass, our dividers stay in place and provide greater stiffness when compared to the cheap plastic ones offered by our competitors. Assembly Instructions - Takes Just Seconds To Install Separate The Dividers The dividers come in easily separable sheets. When needed, simply bend along the cut lines once or twice and they will come part. You should not need any tools to cut these. Assemble The Dividers It is easiest to assemble the divider pieces before installing them in the bin. They are assembled by sliding the notched grooves of the individual pieces into one another. The configuration you use is up to you and depends on how to best utilize your space. Insert The Dividers Drop your divider assembly into the bin. Please make sure that at least one divider is installed into the bin's divider slot in order to hold everything in place. FAQS: How do I separate your dividers? No cutting is required. Simply bend them back and forth at the seam once or twice until they simply snap off.Do your dividers have the blue paper I have to peel off? No, our dividers don't have any film that needs to be removed.Why don't my dividers fit? Please check to be sure you have one of the part number specified above in the listing. Our dividers do not work with older models or other manufacturer's bins. Why do I have to use a small bin width divider to use a small bin length divider? The small bins only have slots to hold in a width divider. The length dividers have to be held in place by one or more width dividers. This is the opposite of the large bins. Why do I have to use a large bin length divider to use a large bin width divider? The large bins only have slots to hold in a length divider. The width dividers have to be held in place by one or more length dividers. This is the opposite of the small bins.Can I label the dividers? Yes, you can either apply a sticky label or write directly on the dividers. The white coloring of our dividers makes the labelling standout well.Can I use these bin dividers in other manufacturer's bins? No, we are not aware of any other manufacturer that these will work with.Someone posted pictures showing your dividers don't fit, why is that? Please note they are trying to use the same divider for both length and width, this does not work as the bin's length and width are different sizes. Because of the many possible uses and different configurations, our length and width dividers are sold separately. Please see our guidelines for selecting the appropriate dividers.Why is there a small gap under the small bin length dividers when used in the center of the bin and what can we do about it? The small bins have a small bump in the bottom of the bins which are part of their manufacturing process. When a length divider is placed over this bump in the middle it creates a small gap on the order of 1/32 of an inch between the bottom of the divider and the bin. If the length divider is placed in one of the other possible positions, this gap is not present because there is no bump. Keep in mind though the slots within the dividers themselves are much larger, on the order of 1/16 of an inch. If you intend to use our dividers to store items smaller than 1/16 of an inch then this may not be a perfect solution for you anyways and/or may require some modifications. Save Space, Save Time, Save Money Make The Most Of Your Storage Bins With Our Configurable Dividers and Divider Boxes Our bin dividers allow you to make the most of your existing storage cabinets. By better utilizing the space you have, you will be able to reduce the number of expensive bins that are required, thereby saving you valuable space and money. And by being better organized with all your components in fewer cabinets, you will spend less time looking for your specific items. Our divider boxes provide the same benefits as our configurable dividers but allow for even more organizational flexibility. They keep your parts fully secure and free from the typical debris that collects in your bins (such as dust and insects). Also, remove only the items from your bins that you want to take without fear of spilling small items everywhere. You can even combine our dividers and divider boxes in the most efficient organizati

Características

• Please Read - These width dividers cannot be used by themselves. They must be paired with our large bin length dividers which are sold seperately.
• Large Bin Width Divider - Must be used with our slotted length divider B0B27XKV2M, compatible with large drawer organizing cabinets 10126, 10144, 10724
• Configurable Divisions - Slots in the dividers (when combined with our lengthwise dividers - part number B0B27XKV2M) allow flexible division of the large drawer organizer bins from 2 to 12 sections.
• High Strength - Made from solid fiber glass, cut and routed to precise dimensions. Provides much more rigidity than the thin plastic ones that come with the unit or are purchased aftermarket.
• Fast To Install - Simply snap one off and install in seconds. No need to cut them out of the back of the unit. Also, no protective film to remove or having to waste time trying to cram them in.
• Easy To Label - The dividers are coated with a smooth white finish that makes it easy to install stick on labels or write directly on them with a marker. Both can be easily removed or changed.

Especificaciones