60W Gigabit PoE++ Injector Adapter, 328ft Power Over Ethernet for AP | 802.3af/at/bt Compliant, Plug & Play, 48V Output for PTZ & Wi-Fi 6, Includes 3.3ft Cat6 Cable

Descripción

Product description Why Choose Our 60W Gigabit PoE++ Injector? Clean Up the Clutter. Deploy Network Hardware Anywhere. Eliminate the messy clutter of bulky power adapters. By injecting high-voltage power directly into a standard Cat5e/Cat6 Ethernet cable, this compact injector allows you to install remote equipment anywhere—even in tight spaces, attics, or outdoor enclosures where no electrical outlets exist. 60W High-Power Budget & 328ft Long-Range Extension Distance Up to 100m (328ft): Delivers blazing-fast Gigabit data and stable power up to 100 meters with zero signal degradation or voltage drops. 60W High-Power Output: Specially engineered for power-hungry devices. Fully backward compatible with 30W PoE+ (802.3at) and 15.4W PoE (802.3af). Versatile Power for Home, Office & Commercial Networks 1. WiFi Coverage: Enterprise WiFi 6/7 APs Easily power high-bandwidth WiFi 6 or WiFi 7 Access Points in large properties, luxury homes, or outdoor venues without running separate power lines. 2. Surveillance: 4K/8K PTZ IP Cameras Provide stable, uninterrupted power to demanding pan-tilt-zoom (PTZ) security cameras, ensuring 24/7 high-definition surveillance and zero frame drops. 3. VoIP Conference Call:Enterprise VoIP Phones Streamline office desktop setups by delivering both high-speed data and reliable power to multi-line video VoIP phones over a single cable. 4. Mesh WiFi Nodes Extend seamless whole-home WiFi coverage by powering mesh satellite nodes in dead zones, attics, or outdoor patios—no AC outlet required for flexible placement. 5. Digital Signage / Information Displays Deliver crisp 4K digital signage content in retail stores, lobbies, or event spaces while powering the display over a single Ethernet cable, eliminating bulky power adapters. 6. Thin Clients / Workstations Simplify hot-desking and shared workspace deployments by powering compact thin clients and mini PCs with clean, cable-free desktop setups. 7. 5G / LTE CPE & Fixed Wireless Access Enable high-speed fixed wireless broadband in rural or temporary sites by powering outdoor 5G CPEs and FWA gateways where grid power is unavailable. 8. Access Control Systems Secure office lobbies, co-working spaces, or gated communities by powering PoE-enabled card readers, biometric scanners, and electronic locks without separate power runs. 9. Building Automation / IoT Sensors Drive temperature sensors, occupancy detectors, and smart lighting controllers in smart buildings, enabling centralized environmental monitoring over standard cabling. 10. Wireless Backhaul / Point-to-Point Bridges Power outdoor wireless bridging radios to connect separate buildings or remote sites over long distances, ensuring stable connectivity in campus or warehouse environments. Q: Is it safe to connect this injector to a non-PoE device (like a laptop or regular router)? A: Yes. Our injector features Auto-Sensing Technology. It will detect whether the connected device requires power. If it’s a non-PoE device, it will only transmit data and will NOT send power, preventing any damage. Q: What is the maximum transmission distance for power and data? A: You can reliably transmit both power and data up to 100 meters (328 feet) using a high-quality Cat5e, Cat6, or Cat7 Ethernet cable. Q: Does this PoE injector have lightning or surge protection? A: Yes, it features built-in 4KV Lightning Protection and short-circuit/over-current protection to shield your valuable network devices from sudden power surges. Q: Can I use this PoE injector to power my NON-PoE device? A:No, not directly. This PoE injector is designed to power standard PoE devices (like PoE IP cameras or APs) by sending power and data through a single Ethernet cable. If your device is Non-PoE (it has a separate DC power jack and RJ45 port), you cannot power it directly with this injector alone. However, you can make it work by using a "PoE Splitter" at the receiving end. The PoE Splitter will take the combined power/data signal from our injector and split it back into a separate Ethernet cable and a DC power plug for your non-PoE device. Q: Will this PoE injector compatible with Ubiquiti UniFi Access Points or Hikvision cameras? A: Absolutely — in fact, that's exactly what it's designed for. Our injector is built to IEEE 802.3af/at/bt specifications, outputting stable power within the standard 44V–57V range to safely power any 48V-rated PoE device. PLEASE READ BEFORE PURCHASING: This unit is for standard/active PoE (48V) devices only. It is NOT compatible with 24V Passive PoE — which is commonly found on some older or non-standard equipment. If your device requires 24V passive power, please do not purchase this unit, as it may damage your equipment. Q: Can this injector power a PoE Extender or a PoE Pass-Through Switch? A: Yes, provided that the total power consumption of the PoE Extender and the connected end-devices does not exceed the 60W limit of this injector. Q: Is this product NDAA compliant? A: Yes, this product fully

Características

• Transform Non-PoE Switches Instantly – No need to upgrade to an expensive PoE switch or hire an electrician. Simply connect this injector between your existing router or non-PoE switch and your device. It injects power directly into the Ethernet cable, allowing you to install equipment anywhere—even in spots without a power outlet
• 60W Stable Power for Demanding Devices – Ensure your 4K IP cameras or WiFi 6 access points never lose connection due to power drops. This injector delivers a dedicated 60W budget with full Gigabit (10/100/1000Mbps) speeds, fully compliant with IEEE 802.3at/af/bt standards for high-bandwidth stability
• NDAA Compliant – This product fully complies with Section 889 of the National Defense Authorization Act (NDAA), making it suitable for government and enterprise procurement
• True Plug-and-Play Desktop Design – No software, drivers, or complex configuration required. The compact, rugged body sits securely on any desk, shelf, or inside a network cabinet. Simply plug in your Ethernet cables and power on for an instant, reliable network expansion
• Flame-Retardant ABS Safety Housing & Electrical Safeguards – Engineered with a flame-retardant ABS shell that withstands high temperatures. The built-in intelligent chip provides automatic protection against over-voltage, over-current, and short-circuits, ensuring safe, 24/7 continuous operation for your home or business
• All-in-One Kit: Everything in the Box – Save time and avoid extra trips to the store. This comprehensive kit includes the 60W PoE++ injector (with a built-in AC power cord) and an additional 3.3ft Cat6 Ethernet cable. It’s a complete, ready-to-use solution right out of the box

Especificaciones