Altavoces de torre KEMIMOTO KP6 UTV Woofers de 6,5" con radiadores pasivos de 5,75" | 520W MAX (130W RMS), unidad Bi-Amp, 3 ecualizadores preestablecidos, sincronización de transmisión, resistencia al agua IP66 para todoterreno y marino, apto para UTV/ATV/barcos

Descripción

Product description Previous page Next page Previous page Next page Previous page Next page Previous page Next page 1 What's in the Box 2 Product Dimensions Is the volume of this speaker loud enough? Is it suitable for use on a high-speed UTV/ATV or speedboat? Yes. KP6 has two 6.5" 50W woofers and two 1" 15W silk tweeters with BI-AMP, RMS 130W, max 520W. When the EQ is adjusted to the Off-Road mode, it can provide loud and full sound even during high-speed driving outdoors or in water environments. What does the IP66 waterproof rating specifically mean? Can it withstand heavy rain or high-pressure water jet cleaning? IP66 rated: dust-tight and strong water jet resistant. Withstands heavy rain, car wash pressure (avoid horn direct), and marine splashes. Not for prolonged immersion. Sealing strip + PCBA coating gives reliable coverage. How is the audio powered? Will directly connecting to the vehicle battery cause power depletion? Voltage 10V-18V (12V systems), direct battery connect. Low-voltage safety feature: voice alert & auto cut-off below 10V to avoid over-discharge. Start engine before power-on to avoid distortion; turn off switch when unused long. What are the differences between the EQ audio effect modes? How to switch between them? KP6 has 3 EQ presets: Bass boost (enhances lows for parties), Default (balanced daily use), Off-road (boosts mids/highs to cut wind/engine noise). Press EQ button on remote to switch instantly. Can the lighting effect be adjusted? How many modes are there? Yes, rainbow effect is supported. Press "Light Switch" on remote to cycle modes. The app offers 230+ colors & modes including breathing, running, gradient, rainbow, music sync, etc. You can also turn lights on/off with the "Light Switch" button. SPECIFICATIONS Max / Peak / RMS Power 520W / 260W / 130W RMS Amplifier Class D Driver Setup 2 × 6.5" Mid-Bass Woofers + 2 × 1" Tweeters + 2 × 5.75" Passive Radiators THD < 1% Frequency Response 45 Hz–20 kHz Dimensions 11.9" L x 7.7" W x 7.7" H (per speaker with clamp); 1.2" L x 3.5" W x 2.4" H (Clamp Bracket Dimensions) Operating Temperature -4°F to 140°F USB USB 2.0; 5V2A OUT; USB Playback Supports MP3 / WMA / WAV / FLAC / AAC / APE AUX_IN / AUX_OUT 3.5MM / 0.9V output Broadcast Supports up to 100 units pairing SNR, SPL SNR > 80dB, 106dB SPL Waterproof Rating IP66 Weight 7.27 lbs (per speaker with clamp); 17.4 lbs (full set, both speakers + accessories); 20.1 lbs (full set with packaging) Impedance 4 ohm Cable Length 6.6 ft power cable and 10.2 ft total speaker wiring (speaker + amplifier cables) Mounting Bracket Fits 1.25"–2" Round Tubes

Características

• The KEMIMOTO KP6 speaker system boasts a distinctive, massive 5.75-inch passive radiator built into its rear pod, engineered for thunderous low-end response and impactful bass performance. At the front, the KP6 is equipped with a 6.5-inch mid-bass woofer and a 1-inch tweeter. This premium driver configuration allows the KP6 to outperform many 6.5-inch tower speakers — not to mention typical 4-inch soundbars. The result is tight, deep bass, robust midrange, and crisp, detailed high frequencies
• Rotating Brackets: KEMIMOTO tower speakers come ready to mount with rotating brackets that fits 1.25" to 2" round roll bars—commonly found on UTV/ATV roll cages and boat railings. For overhead mounting, confirm your roof has at least 12mm of clearance above the roll bar before purchase. The brackets rotate 90° for flexible positioning across various vehicle mounting points. Note: Not work with square or profit tubes. Not fit 2-seat utility vehicles, 2-seat recreational UTVs, or golf carts without round bars
• Louder Without the Distortion: KEMIMOTO UTV tower speakers feature a 520W Max Bi-Amp design for separate tweeter/woofer drive, keeping highs clear and lows powerful at high volume. 106dB SPL sensitivity delivers loud, clean sound. Its 6-driver array (dual 6.5" woofers, 1" silk tweeters, 5.75'' passive radiators) with a 5.6L rear chamber pushes bass to 45Hz and treble past 20kHz. This separation gives vocals and bass their own space, creating a wide, layered soundstage—low-end thump hits your chest while lyrics stay crisp, whether accelerating or cruising
• One-Touch Tuning: KEMIMOTO pod speaker packs a high-performance DSP with 3 preset EQ modes that you can switch instantly. Off-road mode boosts mids and highs against wind and engine noise. Bass boost mode improves deep, thumping lows for camp parties. Default mode keeps a balanced profile for low-speed cruising. Each mode reshapes the frequency curve like a pro tuned it on the spot, giving you the right sound whether you're blasting down a trail or kicking back at the campsite
• Sync the Whole Group: KEMIMOTO UTV stereo system uses broadcast mode to sync over 100 broadcast-enabled speakers within an 82ft radius centered around the host unit. One press activates broadcast mode—compatible units link in seconds for synchronized playback. Picture multiple vehicles parked together at a campsite, or boats tied up at the dock—everyone sharing the same track in tight sync, turning the gathering into a single, immersive sound experience that fills the entire area
• Built Tough for the Outdoors: KEMIMOTO UTV tower speaker is built for off-road environment with an IP66 waterproof housing that keeps mud and water out. Rain, mud, or a quick hose-down of the exterior won't stop the music. The shockproof structure handles heavy vibrations effectively. UV-resistant coating helps protect against sun damage. This is gear that keeps playing through the rough stuff, so you can keep your attention on the trail
• Flexible Connectivity: KEMIMOTO UTV speaker supports wireless streaming, plus a weatherproof 3.5mm AUX input/output and USB port for lossless files from thumb drives. No cell signal in the backcountry? Plug in your USB library. You can even daisy-chain an active subwoofer for extra low-end. For good performance, start your engine before powering on the speaker to avoid voltage dips that can affect sound clarity, and turn off the power switch when the vehicle sits unused to save battery power
• Product Dimensions: The KEMIMOTO UTV tower speaker measures 11.9"L x 7.7"W x 7.7"H per unit including the clamp, with the clamp itself at 1.2"L x 3.5"W x 2.4"H. The full set—two speakers, amplifier, and all mounting hardware—comes in at 17.4 lbs net weight. Includes a 6.6 ft power cable and 10.2 ft total speaker wiring (speaker + amplifier cables) for easy routing on most UTVs. For marine use, please confirm that the cable length and clamp size (fits 1.25"–2" round tubes) are suitable for your setup

Especificaciones