Cargando el producto…
Precio de origen
$ 88.649
+ flete y aranceles — se calculan al cotizar
Compra protegida
Puerta a puerta
Aduana incluida
Product description The 813402 Awning bracket is designed with welded gussets to provide additional strength when awnings are mounted to roof bars on vehicles used off road or under extreme conditions. Zinc plated and powder coated for corrosion resistance and designed to mount either upright or inverted, the awning bracket is 50 mm wide allowing it to fit over both Thule SquareBar & Rhino Heavy Duty bars in the inverted position, or upright using T-bolts or channel nuts on Thule ProfessionalBar, WingBar & AeroBar or Rhino Heavy Duty. Pre-drilled to accept 8mm bolts, at least 2, but preferably 3 bolts should be used to mount to the roof bar for maximum strength. The outer bolt hole between the gussets must always be used for the gusset to be effective. Three slotted 6mm holes are provided to mount the awning. The awning bracket is not supplied with hardware. Due to different bar designs, it is recommended to use T-bolts and channel nuts supplied by the roof bar manufacturer. The current awning bracket has recently been upgraded from 3mm to 4mm construction however it is considered lighter duty and designated for highway use. 813402 ARB Awning Bracket, Fits All Awning Sizes 813402 ARB Awning Bracket, Fits All Awning Sizes Listing is for one bracket, ARB suggest to use 2 or 3 brackets to secure the Awning Works on most roof racks, universal mount, round roof racks are a little harder to install Three slotted 6mm holes are provided to mount the awning, the OS850 awning bracket is not supplied with hardware Multiple Awning Brackets ARB suggest to use 2 or 3 brackets to secure the Awning. ARB has 3 awning sizes, 1250 mm, 2000 mm and 2500 mm. Bigger awnings should use 3 brackets to secure the Awnng to the roof rack Awning Bracket is Pre-drilled The awning bracket is 50 mm wide Pre-drilled to accept 8mm bolts, at least 2, but preferably 3 bolts should be used to mount to the roof bar for maximum strength. The outer bolt hole between the gussets must always be used for the gusset to be effective. Three slotted 6mm holes are provided to mount the awning. The awning bracket is not supplied with hardware. Due to different bar designs, it is recommended to use T-bolts and channel nuts supplied by the roof bar manufacturer. Instalation photos Install Upside Down Install over both Thule SquareBar & Rhino Heavy Duty bars in the inverted position, Fit nicely on ARB Awnings or upright using T-bolts or channel nuts on Thule ProfessionalBar, WingBar & AeroBar or Rhino Heavy Duty. ARB Company ARB products are sold and serviced through authorized distributors worldwide. Our staff and distributors are 4x4 enthusiasts, and have a clear understanding of the demanding conditions our products are expected to work in. See More
Agregás al carrito
Sumás este y otros productos que querés traer.
Cotizás el envío
Calculamos flete aéreo y aranceles a Argentina.
Confirmás y pagás
Un asesor te contacta con el link de pago.
Lo recibís en casa
Tracking en tiempo real. Aduana incluida.
Lo que suele llevarse para tu herramienta · un solo envío para todo
De la misma marca, empezando por lo más reseñado
Los mejor puntuados del mismo tipo de producto
Mismo tipo de producto y precio parecido
