AT-VM750xSH VMx Phono Cartridge

Descripción

Product description Audio-Technica AT-VM750xSH Dual Moving Magnet Cartridge The AT-VMx series brings new warmth and realism to Audio-Technica’s premium dual moving magnet (MM) cartridge line, delivering an expansive soundstage that’s alive with musical detail. Overview AT-VM750xSH The new, lightweight Shibata stylus of the AT-VM750xSH provides greater surface contact with the record groove than an elliptical stylus does, resulting in the pickup of ultra-high frequencies with minimal abrasion and distortion. This nuanced audio reproduction is further enhanced by the adoption of a solid boron cantilever, which transmits signals about 2.5 times faster than the previous model’s aluminum pipe, resulting in more accurate reproduction of dynamic musical passages. Convenience Upgrades Easy to Install & Use Each AT-VMx cartridge body has threaded inserts, enabling it to be mounted to a headshell with just two screws – no nuts required. And the redesigned stylus protector now includes a V-cut for easy reference of the stylus’s position when lowering it onto a record. Features T-VMx dual moving magnet cartridge with Shibata stylusShibata stylus provides long line of contact with the record groove, enabling the pickup of ultra-high frequencies with minimal abrasion and distortionSignificantly lighter stylus tip (compared to previous model) allows for more precise tracing of the record grooveSolid boron cantilever quickly transmits vibrations from the record groove, ensuring accurate reproduction of dynamic musical passagesDie-cast aluminum housing reduces vibrations and resonanceParatoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient responsePCUHD (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient responseCenter shield plate between the left and right channels reduces crosstalk for clear stereo sound. Threaded inserts make cartridge easier to mount, especially to integrated tonearmsV-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a recordCompatible with any turntable headshell that accepts 1/2" cartridges. Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application Premium PCUHD Coils Highly Efficient Generator The paratoroidal coil construction of the cartridge’s generator – two PCUHD coils per channel, one stacked behind the other – greatly improves electromagnetic performance, while a slight reduction in coil turns enhances transient response for clean, lifelike sound. Specifications Frequency Response 20 to 27,000 Hz Channel Separation 26 dB (1 kHz) Vertical Tracking Angle 20° Tracking Force 1.8 to 2.2 g (2.0 g standard) Recommended Load Impedance 47 k ohms Coil Impedance 3.2 k ohms (1 kHz) DC Resistance 750 ohms Coil Inductance 480 mH (1 kHz) Output Voltage 3.7 mV (1 kHz, 5 cm/sec.) Output Balance 1.0 dB (1 kHz) Cantilever 0.28 mm (0.011”) diameter solid boron Static Compliance 20 × 10-6 cm/dyne Dynamic Compliance 7 × 10-6 cm/dyne (100 Hz) Dimensions 29.0 mm (1.1”) × 18.3 mm (0.72”) × 17.5 mm (0.69”) (H × W × D) Threaded Hole M2.6 × 2 Stylus Curvature Radius 2.7 × 0.26 mil

Características

• AT-VMx dual moving magnet cartridge with Shibata stylus
• Shibata stylus provides long line of contact with the record groove, enabling the pickup of ultra-high frequencies with minimal abrasion and distortion
• Significantly lighter stylus tip (compared to previous model) allows for more precise tracing of the record groove
• Solid boron cantilever quickly transmits vibrations from the record groove, ensuring accurate reproduction of dynamic musical passages
• Die-cast aluminum housing reduces vibrations and resonance.

Especificaciones