Cargando el producto…
Precio desde
$ 16.365
+ flete y aranceles — se calculan al cotizar
Tamaño
Compra protegida
Puerta a puerta
Aduana incluida
ATmega32U4 USB transceiver inside the 32U4 allows us to add USB connectivity on board and do away with bulky external USB interface 4 channels of 10-bit ADC 5 PWM pins 12 DIOs as well as hardware serial connections Rx and Tx Running at 16MHz and 5V, this board will remind you a lot of your other favorite compatible boards but this little guy can go just about anywhere. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC. PTC fuse and diode protection to the power circuit and corrected the RX and TX LED circuit. Supported under IDE v1.0.1 How to use: 1. Connected to computer. (If this module cannot be recognized by your computer, please install the driver first) 2. Opened IDE and loaded Blink sketch. 3. Set board to Leonardo and selected the appropriate COM port (It showed up in the list already identified as a Leonardo). 4. Connected an LED to pin 9 and modified the sketch accordingly. 5. Hit upload and within a few seconds having a blinking LED. Package includes: 1 x Pro micro ATmega32U4 5V 16MHz module
Agregás al carrito
Sumás este y otros productos que querés traer.
Cotizás el envío
Calculamos flete aéreo y aranceles a Argentina.
Confirmás y pagás
Un asesor te contacta con el link de pago.
Lo recibís en casa
Tracking en tiempo real. Aduana incluida.
De la misma marca, empezando por lo más reseñado
Los mejor puntuados del mismo tipo de producto
Mismo tipo de producto y precio parecido
![Placa de Microcontrolador RP2040 de 2 Paquetes, ARM Cortex-M0+ de Doble Núcleo de hasta 133MHz, Flash de 2MB, 30 Pines GPIO, Compatible con Raspberry Pi Pico, Soporta MicroPython y C/C++ [Puerto USB-C]](https://m.media-amazon.com/images/I/616yAsmq-0L._AC_SL800_.jpg)
