ATX 3.0 PCIe 5.0 12VHPWR Cable – 2x8 Pin to 16 Pin 600W GPU Power Cord, Type A 4-Pin on Bottom, 16AWG 60cm (24in), for EVGA G7/G6/G5/G3/G2/P2/T2 & Super Flower Leadex Titanium/Platinum/III Series

Descripción

Product description Upgrading to an NVIDIA GeForce RTX 4090, 4080, 4070, 4060, or 3090 Ti graphics card? The ATX 3.0 PCIe 5.0 90-Degree Angled 12VHPWR Cable (Type A) is the solution you need to power your next-gen GPU directly from your EVGA or Super Flower modular power supply. No need for bulky adapters or sharp cable bends—this clean, single-cable solution delivers up to 600W of stable power through two standard 8-pin PCIe connections on your PSU. Requires only 20mm of clearance from the side panel. This cable features the Type A design, with the 4-pin sense wires positioned on the bottom side of the connector (closer to the GPU PCB). This configuration is specifically optimized for graphics cards with thick backplates or limited clearance above the power connector, ensuring full insertion without interference. Type A is ideal for: Graphics cards with thick backplates that may interfere with connectorsGPUs where the area above the power connector has limited clearanceEnsuring full insertion without obstruction from backplate or cooling components This cable is designed for EVGA Type 1/Type 2 and Super Flower unified pinout power supplies. It is NOT compatible with Corsair, Seasonic, or other PSU brands. Using with incompatible PSUs WILL cause permanent damage. EVGA Compatible Series (Type 1/Type 2 Pinout): G Series G7, G6, G5, G3, G2, G1+ P Series P+, P6, P5, P3, P2 T Series T2 Other Series GA, GM, B5, B3, PQ, PS, GS Leadex Series Super Flower Compatible Series (Unified Pinout): Leadex Titanium, Leadex Platinum, Leadex Platinum SE, Leadex III, Leadex VII NOT COMPATIBLE WITH: Any non-EVGA/non-Super Flower PSUs Corsair all series Seasonic all series EVGA G1, B1, NEX series different pinout EVGA 1000PS, 850GS, 1050GS Type 3/Type 4 pinout Standard straight 12VHPWR cables often require bending immediately after the connector, which can: Create stress on the GPU power portPush against glass side panelsIncrease the risk of incomplete insertion—the #1 cause of connector melting Our 90° angled design eliminates these issues by directing the cable where you need it to go—downward toward the PSU shroud or backward toward the cable management channel. The angled connection requires only 20mm of clearance, making it perfect for compact cases. Step 1: Verify PSU Compatibility: Check that your power supply is from EVGA or Super Flower and has two available 8-pin PCIe ports. Confirm your series is listed in the compatibility table above. Step 2: Connect to PSUPlug both 8-pin connectors firmly into the PCIe/GPU ports on your modular PSU. Step 3: Connect to GPU – CRITICAL STEPPush the angled 12VHPWR connector straight and firmly into your GPU‘s power port until you hear a CLICK. Verify NO GAP remains between connector and GPU socket. Super Flower warns: “If the insertion is not secure, it may catch fire.” Step 4: Route CableUse the 60cm (24-inch) length to route the cable cleanly behind the motherboard tray or through cable management channels. The 90° angled design requires only 20mm of clearance from the side panel. 1. FULLY SEAT THE CONNECTORThe #1 cause of 12VHPWR connector failure is incomplete insertion. Always push until you hear a distinct CLICK and verify NO GAP remains. 2. MAINTAIN PROPER BEND RADIUS Do not bend the cable within 35mm (1.4 inches) of the connector as required by PCI-SIG specifications. The 90° angled design eliminates the need for sharp bends—maintain a straight approach to ensure proper contact. 3. EVGA & SUPER FLOWER PSUs ONLYDifferent PSU brands use different pinouts on the PSU side. Using this cable with non-EVGA/non-Super Flower PSUs may cause immediate and permanent damage to your GPU and/or power supply. 4. REGULAR INSPECTIONFor high-power GPUs like RTX 4090, periodically inspect the connector for signs of melting, discoloration, or unusual odor. If you notice any abnormality, power down immediately and replace the cable. 5. PREVENT SIDE PANEL PRESSUREDo not let your PC case side panel press against the cable or connector. The 90° angled design provides 20mm clearance, but always verify adequate space before closing the side panel. Technical Specifications Connector A (PSU Side) 2x PCIe 8-pin Male (EVGA Type 1/Type 2 / Super Flower unified) Connector B (GPU Side) 12VHPWR 16-Pin (12+4) Female – 90° Angled, Type A (4-Pin on Bottom) Cable Length 60 cm / 24 inches (including connectors) Wire Gauge 16AWG Tinned Copper Current Rating 600W Current Rating Up to 55A Temperature Rating 105°C Clearance Required 20mm from side panel Standards PCIe 5.0 / 12VHPWR / 12V-2x6 Power Supply Recommendations: RTX 4090 850W or higher RTX 4080 750W or higher RTX 4070 Ti / 4070 700W or higher RTX 3090 Ti 850W or higher RTX 4060 650W or higher

Características

• 🔹 EVGA & SUPER FLOWER SPECIFIC – EXACT PINOUT MATCH Engineered specifically for EVGA Type 1/Type 2 and Super Flower unified pinout power supplies. Compatible with: EVGA Series: G7, G6, G5, G3, G2, P+, P6, P5, P3, P2, T2, G1+, GA, GM, B5, B3, PQ, PS, GS Super Flower Series: Leadex Titanium, Leadex Platinum, Leadex Platinum SE, Leadex III, Leadex VII ⚠️ NOT compatible with Corsair, Seasonic, or other brands – using with incompatible PSUs WILL cause permanent damage to your GPU and/or power supply.
• 🔹 TYPE A CONFIGURATION – 4-PIN ON BOTTOM DESIGN This cable features the Type A design, with the 4-pin sense wires positioned on the bottom side of the connector (closer to the GPU PCB). This configuration is optimized for graphics cards with thick backplates or limited clearance above the power connector, ensuring full insertion without interference. Also available in Type B (4-Pin on Top) for different GPU layouts.
• 🔹 90° ANGLED CONNECTOR – PERFECT FOR TIGHT CASES The factory-molded 90° angled 12VHPWR connector eliminates the need to bend cables near the GPU port—the #1 cause of connector failure. Requires only 20mm of clearance from the side panel. Standard straight cables often require sharp bends that press against glass side panels; our angled design routes the cable cleanly, allowing you to install wide graphics cards in compact chassis.
• 🔹 600W POWER DELIVERY – PCIe 5.0 & 12V-2x6 READY Built to power the most demanding graphics cards. This cable delivers up to 600W of stable power through two 8-pin PCIe inputs on your EVGA or Super Flower PSU. Fully compatible with NVIDIA GeForce RTX 40 Series (4090/4080/4070/4060) and RTX 30 Series (3090 Ti). Supports both 12VHPWR and the updated 12V-2x6 GPU connector standards.
• 🔹 PREMIUM 16AWG CONSTRUCTION – HIGH THERMAL ENDURANCE Built with high-quality 16AWG tinned copper wire, capable of carrying up to 55A of current with 105°C temperature rating. Features premium high-current terminals rated for reliable power delivery up to 600W. Each cable is factory-tested for safety and performance.
• 🔹 OPTIMAL 60CM (24 INCHES) CABLE LENGTH Total length of 60cm (24 inches) provides ample reach for routing behind the motherboard tray or through cable management channels in full-tower, mid-tower, and compact cases. The premium black flexible ribbon wire design allows for clean, professional cable management.
• 🔹 ⚠️ CRITICAL INSTALLATION SAFETY WARNINGS The #1 cause of 12VHPWR connector failure is incomplete insertion. When connecting to your GPU: Push the connector straight and firmly into the GPU port until you hear a CLICK Verify that no gap exists between the connector housing and GPU socket Do not bend the cable within 35mm (1.4 inches) of the connector – maintain a straight approach as required by PCI-SIG specifications Regularly inspect the connector for signs of melting or discoloration, especially with high-power GPUs like RTX 4090

Especificaciones