Automatic Drip Irrigation System for Indoor Plants, 2026 Automatic Plant Waterer for 15 Potted Plants Watering with Anti-Siphon and Humidity Mode, Timer, Rechargeable Vacation Self-Watering Pump | Vacation Drip Irrigation System for 15 Pots with Smart Humidity Sensor, Anti-Siphon, 490 Timers & USB-C

Descripción

Product description Automatic Plant Watering for INDOOR & OUTDOOR Use Previous page Easy to Use Press the bottom-right button select "Timing" Mode, then Rotate to set how often,how long! When the Soil humidity over 70%, it will Stop Watering automatically ! Press the Pause/watering button, it will watering or pause manually. Next page 1 TIMER MODE 2 HUMIDITY MODE 3 MANUAL MODE Previous page APPLY FOR INDOOR & OUTDOOR USE! NOTE: One fully charge can work 30 Days by Setting watering Time 30 Sec Per Day Next page 1 BUILT FOR LONGER 2 POSITION NOTICE 3 15 POTTED SUPPORT 4 EASY SETUP 5 PROMPT SERVICE Previous page Next page 1 BEFORE 2 AFTER Previous page Next page Where to connect the anti-siphon? Also does it matter if it is higher or lower then the water level? It does not need to be level with the water surface, there is a very easy way, just be installed at the outlet and Higher than your water container, It will totally prevent leakage and over-irrigation, no worry about the leakage or flooding. What should I do if the watering system stops working suddenly? Check if the device is out of battery and charge it. If the device does not charge using the included power cable, try using a different Type-C cable. If the issue doesn't fix , please ask ffor Beday support . Humidity electrodes not working, what should I do? Check whether probe can work: 1.Place probe into water under humidity mode; 2. Set current time and first watering time(1 min later is advised); 3. Wait for 1 min, device starts working, check if there is "WET" on screen. If not, probe is faulty. What should I do if some plants need more water while some need less water, while they are watered at the same time You can choose to insert more watering spikes in this plant, so that this plant can get more water at one time of watering. If there are many plants that need less watering and many plants that need more watering, get 2 sets is advised. The battery indicator stays the same and doesn’t move while charging. What should I do if it won’t charge? This issue is caused by a charging protocol problem, which has now been resolved. If you are facing this issue, maybe you have got an older version. The apple adapter and C-C cable can't work, you can try a different adapter and USB-C cable.

Características

• WORRY-FREE VACATION PLANT SELF-WATERING SYSTEM: Never worry about your indoor plants while traveling. This automatic irrigation system acts as a reliable plant sitter for up to 15 pots,comes with 33 FT tube kit. Ideal for busy professionals, frequent travelers, or anyone needing reliable absentee plant management without relying on neighbors. NOTE: One fully charge can work 30+ Days by Setting watering Time 30 Sec Per Day,suitable for outdoor too.
• SMART LED DISPLAY & INTUITIVE CONTROL: Unlike blind timers, the beday auto drip irrigation system features an advanced LED display screen. Monitor real-time status at a glance, including watering frequency, duration, humidity, timer and battery levels. This indoor watering controller eliminates guesswork, allowing you to fine-tune your garden’s hydration with digital precision. It’s the smartest automatic watering brain for your outdoor plants.
• INTELLIGENT HUMIDITY & TIMER MODES: Unlike basic timers, this automatic plant waterer system features an advanced humidity probe to monitor environmental moisture. Set custom watering schedules using the digital timer, or rely on the smart mode to adjust water delivery based on actual plant needs, providing precise hydration to prevent root rot.
• CORDLESS & USB-C RECHARGEABLE:Say goodbye to tangled wires. The high-capacity built-in battery is USB-C rechargeable, allowing you to place the system anywhere—on balconies, windowsills, or office desks—without searching for a nearby power outlet. (Type-C cable included).
• COMPLETE DIY IRRIGATION KIT: Includes everything needed for a quick, 10-minute tool-free setup: the main watering unit x1, 33ft of customizable tubing x1, 15 T-joints, 15 drip stakes, filter x1, and a charging cable. Designed for safe, long-term use with strict quality control for complete peace of mind. You can DIY your own watering setup, designing a custom irrigation system for your plants；The easy-to-cut hoses and push-fit connectors make customization a simple DIY project for any plant lover.
• IMPORTANT: Charge the watering device fully before first use. Recharge promptly when the battery drops to 1-2 bars to maintain optimal performance.If you have any questions, feel free to reach out to us, and we'll be happy to assist you.

Especificaciones