AZXYI Very High Bond Sticky Adhesive, 9 Pack Adhesive Replacement for Socket Base, 1.4 inches Double Sided Sticker Tapes for Phone Collapsible Grip & Stand Base

Descripción

Product description Pressure-sensitive Adhesive on two Sides The double-side adhesive pad is a three layer material for more easily gripping the liner edge for removal. Red Film Release Liners Closed Cell Acrylic Foam Kraft Paper Release Liners Very High Bond Double-Sided Sticky Adhesive Replacement Kit AZXYI popular sticky adhesive replacement kit will provide a good resilient bonding solution in just about what you can dream up. Here you will find the expert choice for your collapsible socket and car mount replacement. [Package Included] 9Pcs Adhesives for Grip& Stand Base, Diameter: 1.4 inches (35mm), thickness: 0.03 inch (0.8 mm) KEY FEATURES Work with Collapsible Socket Very High Bonding Easy to Apply FUNDAMENTALS of ADHESION Clean Adhesive surface must be dry and free of contaminates. Pressure Firm pressure must be applied to increase the flow and contact of the adhesive with the substrate. Time Time will increase typically further the surface contact and adhesion values. Here are some important notes to keep in mind when using the adhesive: 1.Remove the Old Adhesive: Start by carefully removing the old sticky adhesive glue dots and any residue from the surface. Thoroughly clean the surface, making sure it is completely dry before proceeding. 2.Surface Selection: Choose a flat and smooth surface for installation to achieve the best results. Irregularities or texture on the surface can interfere with the adhesive's ability to form a strong bond. 3.Peeling the Adhesive Tape: If you find that the refill self-adhesive tape is difficult to peel, try pressing back on the tape and then pressing again. This can help loosen the adhesive and make it easier to peel. Avoid using excessive force, as this could damage the tape or the surface you're working on. 4.Attach the Adhesive: Carefully align the new adhesive to the base of the socket or mount that you're attaching them to. Press down firmly and evenly for 5-10 minutes to ensure a strong and secure connection. Make sure to avoid any air bubbles or gaps between the adhesive and the surface. 5.Allow Time for Adhesion: It's crucial to wait at least 24 hours after re-sticking the adhesive before using them. This allows the adhesive to fully cure and set, ensuring a strong and secure connection. Attempting to use the mount before the adhesive has had time to cure could compromise the connection and lead to premature failure. By following these important notes, you can ensure that your adhesive are installed correctly and will perform reliably over time. 9 Pack Socket Sticky Adhesive Replacement Kit 6 Pack Socket Sticky Adhesive Replacement Kit 12 Pack Socket Sticky Adhesive Replacement Kit 6 Pack Sticky Adhesive for Dashboard Mounting Suction Cup Disk 6 Pack Sticky Adhesive for Dashboard Mounting Suction Cup Disk Add to Cart Add to Cart Add to Cart Add to Cart Add to Cart Customer Reviews 4.4 out of 5 stars 11,190 4.5 out of 5 stars 8,188 4.5 out of 5 stars 2,517 4.3 out of 5 stars 595 4.2 out of 5 stars 6,511 Price $4.99$4.99 $4.79$4.79 $4.99$4.99 $5.99$5.99 $6.99$6.99 Film Release Liners Color Red White Red Red Red Suitable for Phone Grip, Phone Ring Holder, Phone Wallet, Socket Car Mount Phone Grip, Phone Ring Holder, Phone Wallet, Socket Car Mount Phone Grip, Phone Ring Holder, Phone Wallet, Socket Car Mount Dashboard Mounting Suction Cup Disk Dashboard Mounting Suction Cup Disk Size 1.4''/35mm 1.4''/35mm 1.4''/35mm 2.76"/70mm 3.15''/80mm See More

Características

• 【9Pcs Sticky Adhesives Replacement】AZXYI offers 9 Pcs adhesive pads(Diameter: 1.4 inches) compatible with socket base, double-side pressure sensitive for attaching socket back to your cellphone.
• 【Easy to Use】To maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. First peel off the white side of the adhesive and stick it to the collapsible grip base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the collapsible grip to your phone case.
• 【Very High Bond】These high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond attaching various substrates/surfaces, stable even in bumpy roads and actually builds strength over time.
• 【Genuine Adhesive Pads】The best sticky tapes for phone collapsible grip we provide is with high temperature resistance and stronger stickiness features. It resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.
• 【Durability】These Double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time.

Especificaciones