Bolsas de laminación térmica Etiqueta de equipaje de 5 mil con ranura en el lado corto 500/paquete | Sellados térmicos de 2-1/2 x 4-1/4 pulgadas tan grandes como tarjetas de 2-1/4 x 3-11/16 pulgadas (evitando ranuras), acabado transparente brillante, +5 portadores

Descripción

Oregon Lamination Heat Activated Laminating Pouches Luggage Tag size 2-1/2" x 4-1/4" x 5 mil 2 sides (64mm x 108mm x 125 microns thick x 2 sides) with slot hole one short side for an attachment device which must be purchased separately. Laminate is high clarity after adhesive is heat activated. The clear glossy finish protects and enhances colors. 5 mil is one of the more popular medium weight laminating pouches for rigidity, protection and compatibility with nearly every thermal pouch laminator on the market. Oregon Lamination is among industry leaders in providing the quality laminating supplies for a reasonable price. Our laminating products provide high value protection using quality materials. This product has heat activated adhesive compatible in all thermal pouch laminators capable of sealing 5 mil 2-1/2” x 4-1/4” laminating pouches. FEATURES:Waterproof and Resists Penetration by Chemicals, Greases, and Oils High glossy finish brightens colors dramatically Small Pre-rounded Corners for a Smooth Professional Finish approximately 1/8” radius (3mm) Metric Pouch size: 64mm x 108mm 125 microns thick (x 2 sides = 250 microns total thickness added to your sheet) Recommended insert sheet size Maximum: 2-1/4" x 3-11/16" (57mm x 94mm) to provide a minimum standard 1/8” (3mm) sealed border protecting your card’s edges while avoiding the pre-slotted hole area (if desired) Made of 2 Durable 5 mil polyester plastic sides including heat activated adhesive (10 mil total encapsulating and waterproofing your sheet) which becomes clear when heat and even pressure is applied (laminator recommended)Note: Industry standard specification for 5 mil laminating pouches is 5 mil on each flap for a total of 10 mil added to your paper card. 1 mil equals 1/1000th of an inch (metric: 25 microns). The industry calls these pouches; however, are sealed on only one edge instead of three (more like a file folder than a pouch, but with a 3/32” flat folded spine). TYPICAL APPLICATIONS:Luggage Tags Trade Show Gifts (laminating business cards into luggage tags) I.D. Cards Badges Proximity Cards Band Passes Machinery & Parts TagsLaminating Tips:When trying ANY for the 1st time, consider running at a slightly lower temperature (or faster speed). If the results are cloudy, you can always run the sheet again at a higher temperature or slower speed, but you cannot fix heat blisters caused by running too hot. If you plan on trimming or punching sheets, wait 24 to 72 hours for adequate adhesive curing time and a professional cut edge. All laminating pouches are not the same. Oregon Lamination laminating pouches have not been setting on the shelf for years. This means fresh adhesive may melt faster than expected, which means potential faster running times or slightly lower temperatures might be used. Oregon Lamination laminating supplies are manufactured to stringent specifications designated by actual users of the product to achieve high clarity with minimum defects. Note: Thank you for considering Oregon Lamination laminating products, designed by people who do laminating for a living and provide a performance guarantee.

Características

• Paquete a granel de 500 bolsas para laminar etiquetas de equipaje: Bolsas para laminar de 2,5" x 4,25" y 5 mil activadas por calor, selladas en un solo borde, con un orificio en forma de ranura de 1/2" x 1/8" (13 mm x 3 mm) perforado en un lado corto para dispositivos de fijación que se deben comprar por separado. El pedido incluye al menos 5 soportes para plastificar recubiertos de silicona reutilizables para los plastificadores que los recomiendan.
• Construcción duradera de doble capa: Hecho de 2 lados de plástico de poliéster duradero de 5 mil, incluido adhesivo activado por calor (10 mil en total encapsula e impermeabiliza su lámina) que se vuelve transparente cuando se aplica calor y presión uniforme (se recomienda laminador)
• Tamaño recomendado de la hoja de inserción: tamaño máximo de inserción de 2-1/4" x 3-11/16" (57 mm x 94 mm) para proporcionar un borde sellado mínimo estándar de 1/8" (3 mm) que proteja los bordes de sus tarjetas y evite el área del orificio previamente ranurado si lo desea
• Esquinas preredondeadas para un acabado profesional: Las pequeñas esquinas preredondeadas con un radio de aproximadamente 1/8" (3 mm) brindan una apariencia profesional suave y evitan bordes afilados.
• Especificaciones métricas: El tamaño de la bolsa 64 mm x 108 mm x 125 micrones x 2 lados equivale a 250 micrones de espesor total agregado a su tarjeta
• Acabado brillante de alta claridad: el acabado brillante transparente protege y realza los colores a la vez que proporciona protección impermeable que resiste la penetración de productos químicos, grasas y aceites.
• Compatibilidad con laminadores universales: Compatible con casi todos los laminadores de bolsas térmicas del mercado capaces de sellar bolsas de laminación de 5 mil, 2-1/2" x 4-1/4"

Especificaciones