Bomba de fuente pequeña, bomba de agua sumergible de 265 GPH con tubo de 3.3 pies, para acuario, tanque de peces, fuente de agua para mascotas, hidroponía, bomba de filtro de cascada de estanque

Descripción

Features: The submersible water pump has an adjustable flow valve allowing you to control the water flow accordingly. The small water pump work as a replacement pump for various fountains, birdbaths, water tables, waterfalls and other water features. The aquarium water pump can be used for circulating water in the tank and for fish tank water changes. The fountain pump ensures fresh water pumped through fountain daily and creates babbling brook sounds to relax you. 4 pcs of suction cups for either vertical or horizontal mounting No need any tools to detach it, easy to separate, easy to clean Specifications: Max Flow Rate: 265 GPH (1000L/H) Recommended H-Max (Lift height): 2.5 feet Voltage: 110 - 120 V @ 60 Hz Length of power cord: 6 feet Outlet: Fits 5/16, 1/2 inch ID (inside diameter) tubing Dimension: : 2.75" x 2" x 2.62" (L x W x H) Package includes: (1) Pump (2) Outlet adapters (1) 3.3ft 5/16” Tubing Troubleshooting Instructions: Why is my pump weak? The pump operates on the principle that higher lift results in lower flow rate. 265 GPH is the theoretical flow rate at zero lift; the actual output decreases with pipe resistance, lifting height. And the higher the lifting height is, the lower the flow rate will be. Why is my pump not working properly? To ensure the water pump operates properly, the following steps must be taken: Submersion Requirement‌: The pump must be fully submerged in water. Debris Clearance: If the impeller is jammed by debris (e.g., fish waste, algae, gravel), causing the pump to stop working, disassemble the housing to remove obstructions and check pipe connections for kinks or blockages to resume normal operation. ‌Air Removal‌: For the first startup or after water replacement, gently shake the pump to expel any trapped air inside; air trapped in the pipe or the pump may cause "gurgling" noises and the pump failure due to airlock. Notes： 1. The inner shaft will be with a little bit of lubricant to ensure the motor is working well, If you are raising sensitive fish or aquatic plants, please use them in other tanks for a short time then move it into fish tanks. 2. Due to all the pumps need professional water testing by our manufacturer before shipment, if the water pump you received has a little water left from the testing, it is a normal phenomenon.

Características

• Wide Application: This submersible water pump is designed for indoor and outdoor fountains, aquarium fish tank, water table, small pond waterfall, bird bath, and hydroponic systems.
• Adjustable Flow Rate: With a flow control valve, the fountain pump can be adjusted up to 265 GPH (1000L/H) to fit your need; Recommanded H-Max (Lift height): 2.5ft Note: The pump operates on the principle that higher lift results in lower flow rate. 265 GPH is the theoretical flow rate at zero lift; the actual output decreases with pipe resistance, lifting height. And the higher the lifting height is, the lower the flow rate will be.
• Compact Size: 2.75" x 2" x 2.62" (L x W x H); length of power cord: 6 ft; optional 2 outlets: Fits 5/16"or 1/2"ID (inside diameter) tubing; 4 pcs of strong suction cups keep it stays in place.
• Why is my pump not working properly? To ensure the water pump operates properly, the following steps must be taken: Submersion Requirement‌: The pump must be fully submerged in water. Debris Clearance: If the impeller is jammed by debris (e.g., fish waste, algae, gravel), causing the pump to stop working, disassemble the housing to remove obstructions and check pipe connections for kinks or blockages to resume normal operation. ‌Air Removal‌: For the first startup or after water replacement, gently shake the pump to expel any trapped air inside; air trapped in the pipe or the pump may cause "gurgling" noises and the pump failure due to airlock.
• Package Includes: 1x 265 GPH Fountain Pump, 1x 3.3 ft 5/16” Tubing, 2x Outlet Adapters

Especificaciones