Almohadilla aislante para capucha de coche, espuma insonorizante con revestimiento de aluminio de 10 mm | 39,4 x 47,2 en espuma autoadhesiva ayuda a reducir el calor y el ruido, recorta para adaptarse a capuchas, cortafuegos, puertas, pisos y maleteros

Descripción

Product description Reduce Heat, Noise and Vibration in One Cut-to-Fit Mat The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. QPKING Car Hood Insulation Mat The QPKING 394mil automotive insulation mat is designed for heat shielding, sound deadening and vibration damping in compatible vehicle areas such as the hood, firewall, door panels, trunk and floor. Aluminum Foil Surface with Closed-Cell Foam The aluminum foil surface helps reflect radiant heat, while the closed-cell foam insulation layer helps reduce heat transfer, engine noise and panel vibration. The self-adhesive backing supports cut-to-fit installation on clean, dry and suitable automotive surfaces. For Hood, Firewall, Door, Trunk and Floor Designed for many automotive insulation projects, this cut-to-fit mat can be used on suitable areas such as the hood, firewall, door panels, trunk, floor, roof and wheel arches. Always check surface condition, clearance and heat source distance before installation. What is this car hood insulation mat used for? This QPKING car hood insulation mat is designed to help support automotive heat shielding, sound deadening and vibration damping on suitable areas such as the hood, firewall, door panels, trunk, floor and roof. What materials does this automotive insulation mat use? The mat features an aluminum foil surface, closed-cell foam insulation layer and self-adhesive backing. The surface helps reflect radiant heat, while the foam helps reduce heat transfer, noise and vibration. What size is the mat, and can it be cut to fit? The mat measures 39.4 x 47.2 in with 394mil / 10mm thickness. It can be trimmed with scissors or a utility knife to fit compatible automotive areas before installation. How do I install the self-adhesive insulation mat? Clean dust, oil and moisture from the surface, measure the area, cut the mat to fit, peel off the backing paper and press firmly. Apply only to clean, dry and suitable surfaces for better contact. What should I check before installation? Check the installation size, surface condition, clearance, heat source distance and moving parts before use. Keep the mat away from exhaust pipes, sharp edges and extremely high-temperature areas.

Características

• Heat and Noise Control: The aluminum-faced 10 mm foam helps reduce radiant heat transfer and absorb some engine and panel noise when installed beneath a hood or on other vehicle panels. Performance varies by vehicle, coverage and installation.
• Large Trim-to-Fit Sheet: The 39.4 x 47.2 in sheet provides about 12.9 sq ft of material for many cars, trucks, SUVs and vans. This is universal insulation material, not a molded OEM hood liner, so measure the installation area and confirm 10 mm clearance before ordering.
• Self-Adhesive Installation: Clean, degrease and fully dry the metal surface, test-fit and trim the sheet, then peel the backing and press firmly from the center outward. A roller, compatible supplemental adhesive or retainers may help on overhead, textured or high-stress surfaces.
• Multiple Vehicle Areas: Trim the foam for hood undersides, firewalls, roofs, doors, floors, trunks, wheel wells and other flat or gently curved metal panels with sufficient clearance. Keep it away from moving parts and direct contact with exhaust manifolds, turbochargers or other extreme-heat components.
• Confirm Fit Before Ordering: Includes one 39.4 x 47.2 in insulation sheet. Verify the installation area, surface condition, 10 mm thickness and available clearance. A roller, vehicle-specific clips and additional adhesive are not included unless shown in the current package contents.

Especificaciones