🇺🇸 Estados UnidosSpark Plug Thread Repair Kits

DPTOOL 10mm Back Tap Spark Plug Thread Repair Tool M10x1.0 Thread Chaser | Spark Plug Tap Kit for Repairing Threads and Preventing Metal Shavings from Entering The Cylinder

Name: DPTOOL 10mm Back Tap Spark Plug Thread Repair Tool M10x1.0 Thread Chaser | Spark Plug Tap Kit for Repairing Threads and Preventing Metal Shavings from Entering The Cylinder
Brand: DPTOOL
SKU: B0FHP2J1FG
Price: 19.99 USD
Availability: InStock
Rating: 4.3 (242 reviews)

4.3 · 242 reseñas

Precio desde

$ 30.927

+ flete y aranceles — se calculan al cotizar

Tamaño

Compra protegida

Reclamamos al vendedor si el pedido llega con defectos.

Puerta a puerta

FedEx desde EE.UU. hasta tu domicilio en Argentina.

Aduana incluida

Gestionamos aranceles y despacho por vos.

Descripción

Function: Used to fix severely cross damaged spark plug hole thread, cleaned up the threads without leaving scraps in the bore, no need pull cylinder head, no need coil insert. No Shavings Drop Into Engine: Used grease on the threaded, so that it will trap any metal shavings within it and pull out with the device rather than drop into the cylinder chamber, not worry about stuff going down into the engine. Durable: Made of high quality 42CrMo steel, its material is equivalent to 4140 steel, with high strength and toughness, good hardenability, no obvious tempering brittleness, high fatigue limit and multiple impact resistance after quenching and tempering, and good low-temperature impact toughness. Therefore, it is more durable hard to damage, is a nice heavy and precise tool

Características

Function: Used to fix severely cross damaged spark plug hole thread, cleaned up the threads without leaving scraps in the bore, no need pull cylinder head, no need coil insert
No Shavings Drop Into Engine: Used grease on the threaded, so that it will trap any metal shavings within it and pull out with the device rather than drop into the cylinder chamber, not worry about stuff going down into the engine
High Quality Material: Made of high quality 42CrMo steel, its material is equivalent to 4140 steel, with high strength and toughness, good hardenability, no obvious tempering brittleness, high fatigue limit and multiple impact resistance after quenching and tempering, and good low-temperature impact toughness. Therefore, it is more durable hard to damage, is a nice heavy and precise tool
Easy to Use: Put it straight through the hole, expand it, back thread it 3-5x. Then reverse it in reverse, especially when it started getting tougher to turn, turning from side to side from time to time, at the same time, during the whole process, Just be sure to go slow. When u hit a hard patch, back it up a little then go forward again. After repeated operations, it is easy to remove the remaining material
12 Months Warranty: We offer 12 months warranty, we will refund or replace if this 10mm back tap spark plug thread repair tool has any quality issue