Eanetf HDMI to RJ45 Extender 30m 1080P for HDTV PS4 STB | HDMI to RJ45 extender set TX+RX, 30m/98ft over Cat5e/6, 1080P 2.5Gbps, No HDCP support, No power needed plug and play

Descripción

Product description Eanetf HDMI to RJ45 Extender Set – Extend HDMI Up to 30m Over Ethernet What It Does The Eanetf HDMI to RJ45 Extender extends HDMI audio and video signals over a single Cat5e/6 Ethernet cable. It allows you to place your display up to 30 meters (98 feet) away from your source device – perfect for home theaters, conference rooms, classrooms, and digital signage. What's Included 1 x HDMI Transmitter (TX) 1 x HDMI Receiver (RX) No External Power Needed Both the transmitter and receiver are bus-powered – no separate power adapters required. Just plug in and go. Key Features Extends HDMI up to 30m / 98ft over Cat5e/61080P Full HD resolution2.5Gbps transmission speedPlug and play – no drivers or setupHot-swappablePoint-to-point transmission – input and output are identical Important Compatibility Notes HDCP NOT Supported – This extender does NOT support HDCP. It will not work with HDCP-protected content (some Blu-ray players, streaming services, and encrypted video sources). Please verify your source device compatibility. 1080P Only – No 4K – This product supports 1080P resolution. It does NOT support 4K UHD. Cable Quality Matters – For full 30m distance, use Cat6 cable. Cat5e may not reach full distance. Poor quality cables will affect signal stability. Compatible Devices HDTV / TVSet-top boxes (STB)DVD players (non-HDCP content)HDPC / PCsPS4 (non-HDCP content)ProjectorsHome and hotel AV systemsConference centersPerfect ForHome theater extensionsClassroom and training room setupsConference room presentationsDigital signage and retail displaysHotel entertainment systems

Características

• HDMI OVER ETHERNET EXTENDER – TX + RX SET – Includes transmitter and receiver. Extends HDMI audio and video signals over a single Cat5e/6 Ethernet cable up to 30 meters (98 feet). No drivers, no software – just plug and play.
• NO POWER SUPPLY NEEDED – This extender set requires no external power. Simply connect the transmitter to your HDMI source, run a Cat5e/6 cable between TX and RX, and connect the receiver to your display. Works instantly.
• 1080P FULL HD @ 2.5GBPS – Delivers crisp 1080P resolution with 2.5Gbps signal transmission speed. Supports hot swapping. Note: This is a 1080P product – does NOT support 4K UHD. Does NOT support HDCP (High-bandwidth Digital Content Protection).
• IMPORTANT – HDCP NOT SUPPORTED – This extender does NOT support HDCP. It will NOT work with HDCP-protected content (e.g., some Blu-ray players, streaming devices, or encrypted video sources). Please verify your source device compatibility before purchasing.
• CABLE QUALITY MATTERS – For full 30m/98ft extension, use high-quality Cat6 cable. Cat5e cable may not reach the full 30m distance. Poor quality cables will affect signal stability and extension distance. Use shielded Ethernet cable for best results.

Especificaciones