for Garmin Dash Cam Constant Power Cable,OBD-II Adapter Cable with Two USB Ports for Car Charging,24/7 Power Supply Mode,Collision Detection Mode,Adjustable Battery Drain Shut-Off,Output 5V/3A

Descripción

Product description Input Voltage 11.6--36V output Voltage 5V maximum output current 3A Wattage 15W Usb Ports 2 Compatible Devices dash cam, carpaly cable,mirror dashcam,GPS,moble phone,radar detector and etc Connector Type obd to usb Power Source OBD II Additional Features Parking mode,Collision Detection Mode,Low Voltage Protection Connectivity Technology USB Color Black Package Dimensions 3.5"L x 2.7"W x 1.5"H Package Weight 2.46 Ounces

Características

• Note: The OBD-II Adapter will not operate a true park mode with a dash camera, it does not sense if the car is running or not. With the switch in position P, it will operate the camera continuously as if the ignition has not been switched off until the car battery voltage reaches the selected cutoff. If you want full time dashcam video recording and not your dashcamera's "parking mode" recording, this unit is for you.
• How does it work?Built in High sensitivity vibration sensor for control the obd power cable work,As soon as the vehicle vibrates, the obd adapter will immediately provide power to the dash cam，such as:Vehicle start,moved,Large vehicles pass by from the side,the vehicle is hit,the door are opened or closed etc [Note] Whether the OBD constant power cable works is not related to whether the vehicle starts, but only depends on whether the vehicle vibrates detected
• Adjustable battery discharge cut-off and provide three low voltage point options,the OBD II power adapter Automatically detect voltage and provide protection. When the voltage you set is reached, the OBD constant power cable will automatically cut off the power supply to prevent excessive discharge of the car battery and ensure that the vehicle can start normally
• 24/7power supply mode,The OBD constant power cable time setting in P mode,it will continue to supply power to the dashcam,just with the basic dashcam you can also Implement 24-hour parking monitoring function [Note] The voltage drops below the set voltage,the power cable will cut off the power supply to the dashcam
• ⅠorⅡ mode,After the vehicle has been stationary for 3 or 10 minutes,the OBD constant power cable will be cut off the power supply to dashcam, But if the power cable detects vibration again,sush as the Vehicle start,moved,hit,the door are opened or closed, the OBD II power adapter will immediately start automatically to power the dashcam and record what is happening. The OBD constant power cable will turn off the power supply again 3 or 10 minutes after detecting the last vibration. The time of turn off power supply again depends on your time settings. [Note] This function will only be activated when the voltage of the car battery is higher than voltage of the low voltage protection you set
• OBD power cable has a 5V voltage output,maximum output current of 3A, stable current, widely compatible with most dash cams,Only obtain power from the OBD interface, without interfering with other OBD data communication [Note] Only supports devices that require 5V, current below 3A,Dont supported12V or Current demand greater than 3A devices
• Equipped with dual USB-A ports, it can simultaneously power two USB devices. Provide greater flexibility and practicality for your vehicle
• OBD constant power cable is easy to install and hide,equipped with standard OBD interface,plug and play,releases cigarette lighter to connect more devices

Especificaciones