FREEKIT® Dust Collection Fittings with Blast Gates -Tight Seal | 2.5 Inch Shop Vac Hose Adapter Y Splitter, Dual-Port Airflow Control, Compatible with Ridgid & Craftsman Wet/Dry Vacuum

Descripción

Product description 𝐅𝐑𝐄𝐄𝐊𝐈𝐓𝐑 𝐃𝐮𝐬𝐭 𝐂𝐨𝐥𝐥𝐞𝐜𝐭𝐢𝐨𝐧 𝐅𝐢𝐭𝐭𝐢𝐧𝐠𝐬 FREEKITR dust collection fittings turn one shop vacuum into a dual-port dust collection setup. Each outlet includes its own sliding blast gate, allowing you to open, close, or adjust airflow for each hose independently. The close-fitting port design, combined with a built-in rubber sealing ring, helps reduce air leakage and maintain more stable suction.

Características

• 🏆【𝐈𝐧𝐝𝐞𝐩𝐞𝐧𝐝𝐞𝐧𝐭 𝐀𝐢𝐫𝐟𝐥𝐨𝐰 𝐂𝐨𝐧𝐭𝐫𝐨𝐥】𝐅𝐑𝐄𝐄𝐊𝐈𝐓 dust collection fittings each outlet includes its own sliding blast gate, allowing you to open, close, or adjust airflow for each hose independently. Use one hose while the other port is closed, or open both ports for dual-hose dust collection. Helps direct suction where it is needed and makes switching between tools faster and easier.
• 🏆【𝐃𝐮𝐚𝐥-𝐏𝐨𝐫𝐭 𝐃𝐮𝐬𝐭 𝐂𝐨𝐥𝐥𝐞𝐜𝐭𝐢𝐨𝐧 𝐒𝐲𝐬𝐭𝐞𝐦】𝐅𝐑𝐄𝐄𝐊𝐈𝐓 dust collection fittings turn one shop vacuum into a dual-port dust collection setup. This 2.5 inch shop vac hose adapter Y splitter lets you connect 2 vacuum hoses at the same time, helping reduce frequent hose changes and improve dust cleanup efficiency for woodworking tools, workbenches, garages, and DIY shop systems.
• 🌟【𝐖𝐢𝐝𝐞 𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐢𝐥𝐢𝐭𝐲】Designed for most standard 2.5 inch wet/dry vacuum hoses and vacuum cleaner ports with an approximate 2.2"~2.3" inner diameter. Compatible with select Ridgid, Craftsman, and other common wet/dry vacuum systems. No extra adapter is needed when used with matching 2.5 inch hoses. Please measure your hose and vacuum port before purchase to ensure a proper fit.
• 🌟【𝐓𝐢𝐠𝐡𝐭 𝐒𝐞𝐚𝐥】Made from impact-resistant plastic for long-lasting use in woodworking and shop cleanup environments. The close-fitting port design, with a built-in rubber sealing ring, helps reduce air leakage and maintain more stable suction. Built to handle sawdust, wood chips, and everyday workshop debris while resisting cracking, deformation, and normal jobsite wear.
• 🌟【𝐐𝐮𝐢𝐜𝐤 𝐓𝐨𝐨𝐥-𝐅𝐫𝐞𝐞 𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧】This dust collector fittings connect quickly without complicated tools or time-consuming setup. Ideal for table saws, sanders, planers, miter saws, cutting tools, and other dust-producing equipment. A practical shop vac attachment for building a cleaner, more efficient dust collection system in workshops, garages, and home DIY spaces.

Especificaciones