Pluma detectora de fugas de gas, olfateador portátil de gas combustible con interruptor de alta/baja sensibilidad, detecta metano, propano, gas natural para el hogar, cocina, RV

Descripción

Product description High & low Sensitivity Switch The gas leak detector has a switchable dual sensitivity range to help pinpoint leaks. Low sensitivity mode: 500 to 1,000 ppm High sensitivity mode: 50 to 500 ppm Visual & Audio Alarm When a combustible gas leak is detected, the bar graph will increase as the gas concentration increases, while the beeping will become faster as the gas concentration increases Low Battery Indication When the battery voltage of the gas detector is less than 3.0V, the screen will display a low battery indication, prompting you to replace the battery in time Automatic Shutdown No measurement signal and key operation, automatic shutdown in about 5 minutes Q:How to set up the gas detector for detection? A:"Turn on the device in a clean air environment, wait for 30 seconds to warm up, the analog bar stops jumping, indicating the end of warm up." Q: How close does the detector need to be to the target to detect a gas leak? A: Typically 1-5 centimeters. Move the sensor head as slowly as possible (3-5 centimeters per second) to the location to be checked for leaks. When a combustible gas leak is detected, the analog bar will increase as the gas concentration increases, and the beeps will also become faster as the gas concentration increases. Q: What Are Combustible Gases? A: "Examples of combustibles gases include the following: Acetone, industrial solvents, alcohol, jet fuel, ammonia, lacquer, thinners, benzene, methane, butane, naphtha, ethylene oxide, natural gas, gasoline, propane, halon, refrigerants, hydrogen sulfide, and toluene." Q: Do Gas Leak Detectors Indicate Which Gas Is Being Detected? A: "No, it do not. Gas leak detectors cannot discriminate from the hundreds of different combustible gases that may be present in your sample. A typical combustibles gas detector is calibrated to methane. Q: Can I Use a Natural Gas Leak Detector for Sewer Gas? A: "Yes, using a gas leak detector is a fantastic tool as a starting point to try to locate a sewer gas leak. Most sewer gas is also composed of methane and hydrogen sulfide." Q: Will a Gas Leak Detector Detect LPG? A: "Yes, LPG is propane and will be detected" Q: Can It Detect a Leak from a Gas Pipe Hidden Behind Drywall? A: "No. For a gas leak detector to find a leak, the actual leak must be accessible to the sensor head of the device." Q: Can a Gas Leak Detector Be Used for a Car Fuel Leak? A: "Yes. Gas leak detectors can help find a fuel leak in transport vehicles." Q: How Can I Test My Gas Leak Detector? A: "The best way to test your gas leak detector is to expose it to a known gas source." Q: Can the Gas Sensor be Replaced? A: "If you find that the sensor no longer works within three years from the date of purchase, Please contact sales." Sensor: Gas Sensitive Semiconductor (GSS) Detection Range: 50 to 1000PPM（Methane） Response Sensitivity: ＞50PPM Warm-up Time: 30 seconds Response Time: ≤ 500ppm: 0.5 seconds; >500ppm: 2 seconds Alarm: Visual: bar graph; Audible: Variable Tone Frequency Buzzer Operating Temperature: 32℉ to 122℉ (0℃ to 50℃) / 20% to 80%RH Relative Humidity: 14℉ to 140℉ (-10℃ to 60℃) / 20% to 80%RH Power Source: 2x 1.5V AAA Alkaline Batteries (Included) Dimensions: 6.61 x 0.85 x 1.35in (168x21.65x26.3mm) Weight: 80G Material: PVC

Características

• No More Risky Guesswork: This gas leak detector pen detects trace leaks as low as 50 ppm (up to 1,000 ppm) in less than 2 seconds. Simply scan the suspicious area to accurately locate the source, helping you avoid massive potential risks at a minimal cost and keeping your family safe.
• High-Quality Gas Sensor: This detection pen features exceptional sensitivity and outstanding repeatability. It accurately detects a wide range of flammable gases, including methane, natural gas, propane, butane, alcohol, ammonia, benzene, ethanol, hexane, hydrogen, and gasoline. It's a reliable tool whether you're inspecting gas lines after a water heater replacement or checking for fuel vapor leaks in a car’s carburetor.
• Accurate Detection of Hazards: By switching between high sensitivity (for trace leaks) and low sensitivity (for gas-heavy areas), the device accurately identifies everything from minor seepage in natural gas valves to severe leaks. This ensures every home safety inspection is precise and efficient, eliminating the mess and hassle of traditional soapy water testing.
• Easy to use: Press and hold the power button for 2 seconds to turn on, let it warm up for 30 seconds, and it's ready. Low battery indication appears below 3.0V, prompting battery replacement. Automatically shuts down after 5 minutes of no detection gas or key operation
• RV & Camping Essential: This gas detector pen is about the size of a marker and fits easily in your pocket or tool kit (Dimensions: 6.61 x 0.85 x 1.35 inches; Weight: 80g). It’s an indispensable portable tool, whether you’re checking propane tank connections in the great outdoors or troubleshooting your grill at the campsite.
• Easy to Use: Simply turn it on and wait 30 seconds for the automatic warm-up. The device provides real-time visual and audio alerts via a backlit bar graph and varying beep frequencies, so you never miss a leak. With up to 200 hours of battery life (2x AAA included) and automatically shuts off after approximately 5 minutes of inactivity and features a low-battery indicator to alert you when power is running low.

Especificaciones