Idatalink Maestro HRN-HRR-MA2 T-Harness for Select Mazda Vehicles (2014-21) Connect a Compatible Car Stereo Retaining Steering Wheel Audio Controls (ADS-MRR or ADS-MRR2 Module Also Required)

Descripción

Product description iDatalink Maestro HRN-HRR-MA2 T-Harness For Select Mazda Vehicles 2014-21 (ADS-MRR or ADS-MRR2 module also required) Note: The iDatalink Maestro HRN-HRR-MA2 requires the purchase of the iDatalink Maestro ADS-MRR or ADS-MRR2 Interface Module. (SOLD SEPARATELY) iDatalink meets Mazda. iDatalink's HRN-HRR-MA2 installation harness simplifies the installation of the Maestro ADS-MRR or ADS-MRR2 Car Radio Replacement Interface module (sold separately) in select Mazda vehicles when replacing your factory radio. The package includes a harness that plugs in between the Maestro module, your factory radio's wiring plugs, and the serial port on your new car stereo. This harness features an in-line head-unit connector harness, which will plug into their new "Head-unit direct" harnesses for select radio brands. If you're installing a radio that doesn't work with a "Head-unit direct" harness, simply cut off the plug and connect the wires to the harness included with your new radio. Retain factory features. The HRN-HRR-MA2 harness and interface module retains your vehicle's steering wheel audio controls, factory amplifier, and backup camera with any aftermarket receiver. The harness also supplies the outputs (parking brake, reverse, and VSS [Vehicle Speed Sense]) necessary for installation of a navigation receiver, plus illumination and accessory power outputs. Extra features with an iDatalink-ready car stereo. If you're buying a compatible iDatalink-ready car stereo, you'll also be able to display gauges and vehicle info on your receiver's screen, plus read and reset engine codes. You'll also keep your side/front/360° cameras if present. Installation note: The HRN-HRR-MA2 adapter must be used with the iDatalink Maestro ADS-MRR or ADS-MRR2 module to connect a new car stereo to your vehicle. Allows installation of a new receiver with iDatalink port in select Mazda vehicles (also requires the Maestro ADS-MRR or ADS-MRR2 module)Retains the use of your steering wheel audio controls and factory ampRetains rear-view camera, depending upon aftermarket radio inputs (iDatalink-ready car stereos also retain front, side, and 360 cameras)Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood, Sony, and Pioneer receivers *Installation Note: This "HRN-HRR Series" Plug & Play Radio Replacement Installation T-Harness requires an Idatalink Maestro ADS-MRR or ADS-MRR2 Interface Module and the corresponding Idatalink Maestro Car Stereo Head-Unit ACC-HU-ALP1 (Alpine), ACC-HU-PIO1 (Pioneer), ACC-HU-SON1 (Sony), ACC-HU-KEN1 (Kenwood/JVC with 22-Pin Connector) or ACC-HU-KEN2 (Kenwood/JVC with 16-Pin Connector) Installation T-Harness. (Sold separately.) ADS-MRR: (Vehicle Coverage: 30 Makes - Models: 4318 - Years: 2002+)ADS-MRR2: (Vehicle Coverage: 30 Makes - Models: 4582 - Years: 2002+) with 3 Programmable Outputs VEHICLE COVERAGE Features Mazda Harness: The iDatalink Maestro HRN-HRR-MA2 installation harness greatly simplifies the installation of the Maestro RR or RR2 Car Radio Replacement Interface module (sold separately) in select 2014-2020 Mazda vehicles when replacing your factory radio with an iDatalink Serial Port compatible head unit from Kenwood, JVC, Alpine, Sony, and Pioneer. Head Unit Connection: The HRN-HRR-MA2 supports iDatalink's Direct T-Harnesses (sold separately) for direct connection to select iDatalink Serial Port compatible head units (including Kenwood, JVC, Alpine, Sony, and Pioneer radios) - replacing the wiring harness that comes with your aftermarket stereo (some hardwiring may still be required). If connecting to an aftermarket head unit that does not support an iDatalink Direct T-Harness, you'll need to cut off and remove the 20-pin black connector from the HRN-HRR-MA2 harness and splice each wire directly to the aftermarket radio's corresponding wire. Note: The iDatalink Maestro HRN-HRR-MA2 installation harness requires the purchase of the iDatalink Maestro RR or RR2 (sold separately). Retained Features: The following factory features (if applicable) are retained when replacing your factory radio with a compatible iDatalink Serial Port head unit from Kenwood, JVC, Alpine, Sony, or Pioneer using the Maestro RR Car Radio Replacement Interface module and HRN-HRR-MA2 installation harness. Factory Amplifier: The factory amplifier will be retained with balance and fader. It can also be used in vehicle's with factory non-amplified systems.Steering Wheel Controls: Factory steering wheel controls are retained with two function buttons and expandable radio functions.Advanced Camera Functions: Factory backup camera is retained with dynamic parking guidelines if your aftermarket head unit, as well as factory Lane Assist camera. If you add an aftermarket front and/or side cameras (sold separately) to your idatalink compatible head unit that is equipped with multiple camera inputs, the vehicle's factory auto camera switching feature is also retained. Extra Features: The following Extra fe

Características

• iDatalink Maestro HRN-HRR-MA2 Connect an iDatalink-compatible car stereo and retain steering wheel audio controls in select 2014-21 Mazda vehicles (ADS-MRR or ADS-MRR2 module also required)
• iDatalink's iDatalink HRN-HRR-MA2 installation harness simplifies the installation of the Maestro ADS-MRR or ADS-MRR2 Car Radio Replacement Interface module (sold separately) in select Mazda vehicles when replacing your factory radio.
• Retain factory features. The HRN-HRR-MA2 harness and interface module retains your vehicle's steering wheel audio controls, factory amplifier, and backup camera with any aftermarket receiver. The harness also supplies the outputs (parking brake, reverse, and VSS [Vehicle Speed Sense]) necessary for installation of a navigation receiver, plus illumination and accessory power outputs.
• Retains the use of your steering wheel audio controls and factory amp. Retains rear-view camera, depending upon aftermarket radio inputs (iDatalink-ready car stereos also retain front, side, and 360 cameras)
• INSTALLATION NOTE: This HRN-HRR Plug & Play T-Harness REQUIRES an Idatalink Maestro Interface Module (ADS-MRR or ADS-MRR2) and the corresponding Idatalink Maestro Car Stereo Head-Unit ACC-HU-ALP1 (Alpine), ACC-HU-PIO1 (Pioneer), ACC-HU-SON1 (S0NY), ACC-HU-KEN1 (KENWO0D/JVC with 22-Pin Connector), ACC-HU-KEN2 (KENWO0D/JVC with 16-Pin Connector), ACC-HU-KEN3 (2024 & Newer KENWO0D/JVC with 22-Pin Connector), ACC-HU-BOS1 (BOSS Radio) or the ACC-HU-JEN1 (Jensen) Installation T-Harness. Each Sold separately. These adapters allows you to connect select car stereos to compatible iDatalink T-harnesses.
• (ADS-MRR: Vehicle Coverage: 30 Makes - Models: 4318 - Years: 2002+) - (ADS-MRR2: Vehicle Coverage: 30 Makes - Models: 4582 - Years: 2002+ with 3 Programmable Outputs)

Especificaciones