INEFIL ER70S-6 Alambre de soldadura MIG .030" — Carrete de 10 lb | Hecho en Italia | Alambre sólido para todas las posiciones para fabricación, remolques y acero estructural — AWS ER70S-6

Descripción

Product description Italian Precision. European Standards. INEFIL is produced by INE SpA in Italy — not a commodity import. Manufactured with premium materials and cutting-edge technologies for superior reliability. When you buy INEFIL, you buy 75+ years of Italian metallurgical engineering excellence. Low Spatter. Consistent Bead. Controlled Mn/Si chemistry (Mn 1.40% / Si 0.80%) produces a smooth, stable arc with minimal spatter across the full amperage range. Verified by thousands of buyers running INEFIL on different welding machines. Flat, Horizontal, Vertical, Overhead. Qualified for all welding positions per AWS A5.18. Use it flat on a chassis, vertical on a column, or overhead on a structural member — the wire feeds consistently and the puddle behaves predictably in every orientation. Wound Tight. Ships Sealed. Feeds Clean. INEFIL spools are precision-wound and moisture-sealed for delivery. The spool also features a viewing window so you can check remaining wire at a glance. Certification Descriptions : Why It Matters for Welding ABS American Bureau of Shipping - The ABS approval certifies INEFIL for structural welding on commercial vessels and offshore platforms built to U.S. marine standards. Required by shipbuilders, repair yards, and marine contractors. ABS-certified wire is often a contractual requirement on vessel fabrication projects.TÜV Technischer Überwachungsverein (Germany) - TÜV is Germany's premier independent technical safety authority. TÜV certification of INEFIL validates that the wire meets rigorous European product safety and performance requirements. It is the benchmark trusted by German engineering firms worldwide.DB Deutsche Bahn (Germany) - Deutsche Bahn is Europe's largest railway operator. DB approval means INEFIL meets the structural welding specifications required for German rail infrastructure — one of the most demanding structural welding environments in the world, where weld integrity directly impacts passenger safety.DNV GL Det Norske Veritas / Germanischer Lloyd - DNV GL is the world's largest ship and offshore certification body, active in over 100 countries. INEFIL's DNV GL approval is the global gold standard for offshore platform and deep-water vessel welding consumables — required on most major oil & gas fabrication contracts.LR Lloyd's Register (UK) - Founded in 1760, Lloyd's Register is one of the oldest and most respected marine classification societies globally. LR approval certifies INEFIL for structural marine and industrial applications built to LR's stringent quality framework — standard for UK and Commonwealth shipbuilding.RINA Registro Italiano Navale (Italy) - RINA is Italy's national classification society for ships and industrial equipment. RINA approval (Grade III YMS, M21 and C1) is required for structural welding on Italian-classified vessels and marine structures — reflecting the same standards applied to the country where INEFIL is manufactured.CWB Canadian Welding Bureau - CWB certifies welding products to Canadian Standards Association (CSA) requirements. CWB approval is mandatory for structural steel welding on Canadian-code construction projects, including bridges, buildings, and pressure vessels. It is the primary conformance mark required by Canadian fabricators and inspectors.CE European Conformity Mark - CE marking confirms INEFIL meets applicable EU product directives. It is the baseline legal requirement for selling welding consumables across the European single market — and signals that the product has been independently assessed against European harmonized standards. AUTO BODY & SHEET METAL RESTORATION Recommended diameter: .023" For panel repair, patch sections, and exhaust fabrication on 18–24 gauge steel, .023" INEFIL delivers the low heat input needed to avoid burn-through. Controlled silicon content produces minimal silicate islands, reducing post-weld cleanup and grinding time on visible body panels. Verified by multiple buyers: less spatter, smaller heat-affected zones, and cleaner toe geometry on thin steel than comparable wire grades. STRUCTURAL FABRICATION & TRAILER MANUFACTURING Recommended diameter: .035" INEFIL's 560 MPa tensile strength (M21 gas, as-welded) and 26% elongation meet or exceed the requirements for general structural steel welding per EN 10025-2 and HSLA grades. The .035" diameter, running at 140–350A, is the fabrication shop standard for trailer frames, structural members, and heavy plate joins — where consistent mechanical properties matter as much as deposition speed. MARINE & OFFSHORE FABRICATION Recommended diameter: .030" or .035" INEFIL holds concurrent ABS, DNV GL, LR, and RINA certifications — making it one of the few solid MIG wires qualified across all four major marine classification societies. Charpy impact values of 90J at −20°C (with M21) confirm toughness in cold marine environments. PIPE, PRESSURE VESSEL & BOILER WELDING Recommended diameter: .030" or .035" INEFIL is qualified for welding pip

Características

• Made in Italy Since 1950 — Manufactured by INE SpA using European carbon steel and proprietary drawing processes — certifications used in shipbuilding, pressure vessel, and structural fabrication. Consistent diameter and copper coating on every spool
• Low Spatter — Higher manganese and silicon deoxidizer content means less spatter, smoother bead appearance, and minimal post-weld grinding. Requires shielding gas: C25 (75% Ar / 25% CO2) or 100% CO2. Polarity: DC+
• Smooth & Stable Arc — Tight dimensional tolerances and sealed spool packaging deliver consistent feed without bird-nesting. Feeds reliably in Miller, Lincoln, Hobart, ESAB, Eastwood, Forney, and most standard MIG setups
• All-Position Welding — Flat, horizontal, vertical, and overhead. Rated for single and multi-pass welding on mild steel and HSLA steels up to 510 MPa tensile. Suited for auto body, trailers, structural frames, tanks, boilers, and general fabrication
• AWS A5.18 Classified — Classified AWS A5.18 / EN ISO 14341-A. Third-party certifications include ABS, TÜV, RINA, DNV-GL, Lloyd’s Register, CWB and CE — the approvals required for professional, structural, and marine welding applications worldwide

Especificaciones