Inversor Solar Híbrido SUMRY, Potencia de Onda Sinusoidal Pura de 4000W DC24V a AC120V | Cubierta Superior de Cristal con Pantalla LCD, Controlador de Carga MPPT de 140A, Soporta Batería de Litio sin Batería o AGM, Fuera de la Red

Descripción

Product description All-in-one Inverter Charger with 140A MPPT Solar Controller Warm Tips: Before wiring and using the inverter, please read carefully the paper user manual included in the package. It is recommended to install 4 circuit breakers in the following 4 positions: 1. 200A 2-pole breaker between the battery pack and the inverter's battery input terminals 2. 20A 2-pole breaker between the solar panels and the inverter's PV input terminals 3. 63A 2-pole breaker between the inverter's AC power input terminals 4. 40A 2-pole breaker between inverter's output terminals and load This power inverter dose Not support parallel operation.This solar inverter is not waterproof. Please install it indoor with good air ventilation or under shelter to protect it from rains.The maximum solar input voltage that this 4000 watt inverter can accept is 350VDC. Considering that sometimes the sun is particularly good, the solar input voltage can exceed 350VDC. So it is recommended that the maximum open circuit voltage of the connected solar panel is 280VDC. PV Start-up voltage is recommended to >90Vdc for initial charging the battery.This hybrid inverter is featured with a built-in automatic transfer switch (ATS). Connect the utility grid directly to the inverter's AC input, and connect the inverter's AC output directly to the load. Do not install any additional transfer switches.This solar inverter has only one communication port, for remote mornitoring or BMS. It only supports PACE BMS protocol and the related cable is not supplied. Module for mobile APP remote mornitoring is sold separately.Please do not use the inverter for long periods of time at full load or overload, this may shorten it's lifespan. 4000W Pure Sine Wave DC 24V to AC 110V Hybrid Solar Inverter for household, outdoor camping, RV, photovoltaic system, backup power storage Inverter Specifications Model Name HGX-4KW-120V Rated/ Continious Output Power 4000 watts Surge/Peak Power at startup 8000 watts Output Voltage AC100V-130V Settable Output Frequncy 50Hz/60Hz(Settable) Maxinum PV Array Input 5600W, 350VDC, 20A PV Start-up Voltage 90VDC PV Array MPPT Volatge Range 55-350VDC Recommended PV Input Range 90-280VDC AC Input 90-140VAC Maxinum Charging Current Solar 140A, AC 110A, Solar+AC 140A Battery Nominal DC Volatge 24VDC Bulk Charging Voltage Range 24V-29.2VDC Float Charging Voltage Range 24V-29.2VDC Low DC cut-off Voltage Range 20V-24VDC Over Charger Protection 32VDC

Características

• Unique Glass Cover Design: Tempered glass upper cover with big 6.25 inch LCD display and touchable buttons, cool look with high transparency, more clear to see real-time data of your inverter
• Powerful Inverter: 4000W rated and 8000W peak output. Please check the rated and peak power of your load, add up the watts used by all devices you think you'll run at the same time and see whether it is within the output power range of the inverter
• Stable and Efficient: Pure sine wave output, no interference, extends life of your devices, especially sensitive inductive appliances. Build-in 140A MPPT charge controller, max. PV 5600W 350VDC, max. conversion efficiency 98%
• Work without or with Battery: This power inverter can work without battery in daytime, use PV DC current to run the loads. While PV input voltage needs exceed 120V and grid is NOT connected, or it will consumes grid power inevitably. To reduce grid power consumption, we recommend connecting a battery. It works with most kinds of 24V batteries like AGM, Gel, Lead-acid, Lithium-ion and LiFePO4
• Hybrid Solar Inverter: This power inverter can configure charging and output priority of solar panels, battery or utility, allowing for energy storage and direct use, provides you sustainable power for off grid life, power outage, emergency
• Easy Settings: With function buttons and a LCD display, indicating the operating status and input/output power information, allowing you to set parameters like battery charging current, priority of AC and solar energy
• Safe and Reliable: Built-in three cooling fans. Multiple protections for overload, overheat, over current, short circuit. One-key restoration to default settings. Smart battery charge design to optimize battery life
• Please Note: An electronic version of the user manual is available on the product details page. Please read the manual carefully (24V, 4KW model). Please install and use this inverter in accordance with the instructions in the manual

Especificaciones