Cargando el producto…
Precio desde
$ 78.219
+ flete y aranceles — se calculan al cotizar
Versión
Compra protegida
Puerta a puerta
Aduana incluida
Product Description The Kidde Heat Detector, Hardwired with Battery Backup & 2 LEDs, Interconnectable, model HD135F, is an AC/DC powered heat alarm that operates on your home's 120V power source. In the event of a power failure, the Kidde heat alarm comes equipped with a 9-Volt battery backup (included). Using heat sensing technology, the wired heat alarm detects temperatures rising above 135⁰ Fahrenheit, alerting homeowners to dangerous temperatures unlike a smoke alarm, which only detects smoke. Heat detectors are recommended for areas where a smoke alarm may not be appropriate, such as in a kitchen, garage, attic, or other area where smoke or dust may set off a false alarm on a smoke detector. Installing both smoke and heat detectors in a home can provide extra protection while triggering fewer nuisance alerts. The heat alarm includes a quick-connect power harness to make installation fast and easy. An 85-decibel alarm sounds when the high temp sensor detects elevated heat conditions. Two LEDs indicate the heat sensor alarm's status: a green LED is constantly 'on' when AC power is present, and a red LED will flash every 30-40 seconds to indicate that the heat alarm is operating properly; the red LED and will flash rapidly when the unit is sounding until air temperature is reduced. The Kidde heat detector can be used as a single unit or interconnected with up to 24 Kidde devices (18 of which can be initiating) in a multiple-station arrangement, not exceeding the NFPA (National Fire Protection Association) limit of 18 initiating devices (smoke, heat, CO). It is possible to interconnect 6 strobe lights and or relay modules. Ideal for garages. UL Certified with a 5-year limited warranty. From the Manufacturer The Kidde 120-Volt AC Hardwire Heat Alarm gives you and your family an early warning to dangerous temperatures of 135-Degree F or more. This unit can be used as a single station unit or it can be interconnected to up to 24 Kidde devices in a multiple station arrangement. The interconnect system should not exceed the NFPA interconnect limit of 12 smoke alarms and or 18 initiation alarms. The heat detector includes a tamper resist pin to help deter tampering or theft.
Agregás al carrito
Sumás este y otros productos que querés traer.
Cotizás el envío
Calculamos flete aéreo y aranceles a Argentina.
Confirmás y pagás
Un asesor te contacta con el link de pago.
Lo recibís en casa
Tracking en tiempo real. Aduana incluida.
De la misma marca, empezando por lo más reseñado
Los mejor puntuados del mismo tipo de producto
Mismo tipo de producto y precio parecido
