Marcador de paintball Airsoft PCP, manguera de bobina remota de 100 "con desconexión rápida de acero inoxidable y comprobación deslizante nominal de 4600psi

Descripción

Product description 8mm Nipple Adapter 8mm fill nipple and G1/2-14 thread adapter. To connect marker and hose. Made by aluminum alloy. Universal Fill Adapter Easy to install and disassemble, convenient for replacing seal o-ring. Made by aluminum alloy. Slide Check With slide check, easy take on or off the air, not need disconnect from cylinder or marker. Made by stainless steel. Quick Disconnect 8mm female quick disconnect, made by stainless steel. Polyurethane o-ring Using high-strength polyurethane as the material for quick disconnect o- rings, has a service life 10 times that of urethane material and can be used under a pressure of 6000psi. High pressure resistance Low temperature resistance Good friction resistance Easy installation True High Pressure Hose Safe is the most important, all of our hose are specially customized and can work normally under a maximum pressure of 4600psi/320bar. The test blasting pressure is 11516psi/794bar. You can use it with confidence under high pressure. Outer diameter of hose: 0.34inch Thread of the hose: 1/8npt Maximum folding angle: 60° Working pressure: 4600psi/320bar Stainless Steel Quick Disconnect Ordinary copper nickel plated products, after many times use, the electroplating layer will fall off and the gap will scratch the o-ring in slide check. Stainless steel surface,, never deform. Universal Adapter Thread G1/2-14 Max Working Pressure 4600psi/320bar Material of Quick Disconnect Stainless steel Hose Length 52inches(straight), 100inches(coiled) Aopkeo Paintball Marker Gun Remote Hose Line 52inchines/130cm Stainless Steel... Aopkeo DIN Valve Fill Station Adapter 4500psi/300bar with 20inches Hose Dual ... Aopkeo 2-Pack Cylinder Bottle Tank Valve Regulator Thread Protector Cover Dus... Aopkeo 20 inches High Pressure Filter Water Oil Separator 8mm Female Quick Di... Aopkeo Paintball PCP Airsoft Tank G5/8(5/8BSPP) DIN Fill Station Filling Conn... Add to Cart Add to Cart Add to Cart Add to Cart Add to Cart Customer Reviews 4.6 out of 5 stars 10 4.1 out of 5 stars 55 4.8 out of 5 stars 20 4.6 out of 5 stars 5 4.7 out of 5 stars 6 Price RON 131.57RON131.57 RON 226.87RON226.87 RON 63.49RON63.49 RON 70.30RON70.30 RON 213.25RON213.25 For Air ✓ ✓ ✓ ✓ ✓ See More

Características

• Safety is important, real high pressure hose, test blasting pressure 11516psi, max working pressure 4600psi, the coiled hose fully extended size is 100 inches.
• Desconexión rápida de acero inoxidable con control deslizante, no se preocupe si la superficie del niquelado de cobre se cae después de deslizarse muchas veces. Más duradero que el cobre y menos propenso a deformarse.
• Con control deslizante, fácil de poner o quitar del aire, no es necesario desconectarlo del cilindro o marcador. Cuando empuje el control deslizante hacia abajo, libere el gas residual conectado al marcador, de forma más segura.
• Polyurethane oring with hardness of 90Duro is used for key parts, which has better sealing and longer service life. It includes a complete set of orings for backup.
• Adaptador de llenado universal G1/2, apto para depósito de CO2, aire comprimido o N2. El adaptador de llenado universal mejorado facilita la operación y el reemplazo de piezas.
• Quick disconnect Male ASA Adapter included, fits all paintball markers.

Especificaciones