MIG225SP MIG Welder with Aluminum Spool Gun, 225A 110/220V, 6 in 1 Gas MIG, Spool Aluminum, Gasless Flux Core, Stick, Lift TIG, Spot, Multi Process Welding Machine Auto Synergistic Setting | Auto-synergic parameter calibration for smooth puddles; joins 2/5-inch structural plates or gasless sheet metal

Descripción

225A 6-in-1 Multi-Process MIG Welder With Spool Gun Built for DIY and repair work at home or on the job site. Switch among Gas/Solid-Wire MIG (GMAW), Gasless Flux-Core (FCAW), Spool-Aluminum MIG, Stick/MMA, Lift TIG, and Spot modes. Dual-voltage 110/220V and an auto-synergic MIG setup help you get clean, consistent results faster.Made For Real ProjectsAluminum projects out of the box with the included spool gunAuto-body patch panels, thin-sheet steel work, appliance and furniture repairsFarm fence and field fixes, trailer/RV maintenance, small-shop fabricationKey FeaturesAuto-synergic MIG: automatic parameter matching; manual voltage trim for fine controlLarge LED screen and clear UI for quick 3–5 step setupStable aluminum wire feeder; thermal overload protectionWorks with gas or gasless (flux-core) wireTech SpecsInput Power: 110–125V AC or 210–250V ACMax Output: up to 225ALift TIG Output: 10–225A DC (torch not included)Stick Output: 10–200A DCSupported Wire: 0.023/0.030/0.035/0.040 in (0.6/0.8/0.9/1.0 mm) solid & flux-core; 0.035/0.040 in (0.9/1.0 mm) aluminumTypical Thickness: steel ~18 Ga–2/5 in (multi-pass); aluminum ~18 Ga–1/4 in (with spool gun)What's In The Box225A welder, 10 ft (3 m) aluminum spool gun, 10 ft (3 m) MIG torch6 ft (1.8 m) stick electrode holder, 6 ft (1.8 m) ground clampGas hose, 240V→120V pigtail converterContact tips: 0.023/0.030/0.035/0.040 in; rollers: 0.023 & 0.035 in and 0.030 & 0.040 in (one pair pre-installed)NEMA 6-50 plug pre-installedNotes Lift-TIG capability is supported; a compatible TIG torch is required and not included. Use Ar/CO₂ mixes for steel and pure Ar for aluminum.

Características

• ★ Aluminum-Ready With Spool Gun Included - Weld aluminum out of the box for auto-body, trailer/RV, boat work, and DIY; spool feed helps prevent bird-nesting for cleaner beads.
• ★ 6-In-1 Multi-Process Flexibility - MIG (GMAW), Flux-Core (FCAW), Spool-Aluminum MIG, Stick/MMA, Lift TIG (torch not included), and Spot; switch as projects change.
• ★ Auto-Synergic MIG And Large LED Screen - Set up in seconds; auto parameters speed start-up, while voltage trim lets you fine-tune for cleaner, lower-spatter welds.
• ★ Dual-Voltage 110/220V For DIY And Repair - Works in garages and on job sites; stable wire feeder and thermal-overload protection support farm-fence and field fixes.
• ★ Versatile Applications For DIY And Repairs - Weld mild steel, stainless, and aluminum; ideal for auto repair/fab, appliance fixes, furniture frames, and general projects.
• ★ Cleaner Results With Stable Wire Feed - Consistent feed reduces spatter and restarts, cutting grind time and improving thin-sheet finish.
• ★ Tech Specs: Output & Thickness - 110–125V or 210–250V input; up to 225A; Steel ~18 Ga–2/5 in (multi-pass), Aluminum ~18 Ga–1/4 in (with spool gun); TIG 10–225A DC; Stick 10–200A DC.
• ★ Tech Specs: Wire & Gas - Supports 0.023/0.030/0.035/0.040 in solid & flux-core, and 0.035/0.040 in aluminum; use Ar/CO₂ mixes for steel and pure Ar for aluminum.

Especificaciones