Minirespirador motorizado PuriCurrent. Máscara respirador de polvo y gas con ventilador y filtros H13 HEPA y carbón activo. Para pintura/carpintería/trabajos de construcción/bricolaje. Respiración fácil. Mejor protección y productividad

Descripción

Product description WORK SAFER, BREATHE EASIER, PERFORM BETTER. HIGH-EFFICIENCY FILTRATION AND BREATHE WITH EASE A fan-assisted respirator, with built-in fan and HEPA + Active carbon filters cartridge, to provide better ventilation and more clean air, for better comfort and higher productivity—without air hoses or belt packs SOUND & LIGHT ALERTS FOR CONVENIENT OPERATION 2-speed airflow increases comfort and productivity. LED and sound reminding for wind mode.White LED lighting for illumination in dusts.When battery is low, 3 beeps and red flashes will alert every 2 minutes. DUAL INHALE OPTIONS Fan-assisted air blowing, and natural breathing - when temporarily runs out of batteryIf you prefer stronger airflow and don't mind the breeze on your nose, you can optionally remove the yellow inhale valve from the mask. COMFORTABLE MATERIAL AND SAFE VALVE Food Grade Skin-friendly Silicone：Soft, comfortable fit for long time wear.Safe One-Way Valve：Air flows out, never back in. WIDE AND CLEAR VIEW AND SECURE FIT Easy Installation：Quick setup with convenient connection.Adjustable head straps: Flexible straps adapt to various face shapes, ensuring a snug and comfortable fit for long-term wear.Compact Filter Box：The mini air purifier cartridge, mounted in the lower-center, retains a maximum vision field to enhance safety. IDEAL FOR USE IN VARIOUS OCCASIONS Woodworking & DIY Prevent inhaling fine sawdust for respiratory protection Metalworking & Grinding Efficiently filters fine metal particles to protect the respiratory system Construction & Stone Cutting Effectively captures dust and airborne particles from material cutting Sanding Prevents inhalation of dust particles generated during sanding BATTERY CHARGING How to Charge: Open charging port cover and plug in charging cord. After charging is complete, reinsert the charging port cover to keep out dust and debris.Charging Indicator Light: The light will flash indicating battery level: red → yellow → blue → green. When fully charged, the green light will stay on and a long beep will sound.Usage Time: 6~9 HoursPlease fully charge the purifier cartridge before use.If unused for long periods, please fully charge the purifier cartridge before storage and recharge it every 2~3 months to extend battery life. FILTER INSTALLATION AND REPLACEMENT Hold both sides of purifier cartridge, unbuckle, and remove the filter cover.Place/Replace H13 HEPA into the rectangular slot(tab facing out) , surrounded by the O-ring.Place/Replaceactivated carbon inside the filter cover.Align the top hole with the lugs, press the bottom buckle until it clicks. Purifier Cartridge Dimensions: 4.65*2.44*1.46 in(118*62*37 mm), Weight: 2.5 oz(71 g) PURIFIER CARTRIDGE INSTALLATION Hold the respirator and cartridge with both hands. Align "JK2L" (on the top cover) with "Unlock" (above the intake port) and press firmly.Turn the cartridge clockwise until "JK2L" reaches "Lock."To remove, turn it counterclockwise until "JK2L" aligns with "Unlock," then pull it out. RESPIRATOR WEARING Place the head cradle at the back of your head. Pull the strap down and back to fully cover your mouth and nose.Pull the lower strap behind your neck, secure it with the buckle, and adjust for a snug fit. Repeat if needed.Tighten the lower strap to adjust upper tension, ensuring both sides are even. Adjust the respirator for comfort. Half face Respirator Dimensions: 5.0*4.13*2.48 in(127*105*63 mm), Weight: 2.9 oz (81g)For better comfort, unpack the half face respirator before first use and let it air out in a well-ventilated place until the packaging smell fades. UNIQUE STRUCTURE FOR EFFICIENT AND EFFECTIVE OUTPUT UNIQUE DESIGN AND SAFE FILTRATION FOR EVERY BREATH H13 HEPA: 99.95% efficiency for particles ≥ 0.3μmActive-carbon: Filters larger particles and absorbs odorsMicro fan: Extra filtered air, 2 wind speedsMulti-airflow: Dual inhale by special design: fan-assist or natural breathLi-Po battery: 2.5 H charge, use 6–9 HIndicator light: LED and sound alerts / lighting. And LED illuminationRespirator: Skin-friendly silicone for long time comfortAir Exhalation: Safe One-Way Valve. Air flows out, never back inFilter cover: Center-low positioned for max. vision fieldHead strap: Adjustable, pressure-reducing fit COMFORT BY DEFAULT, POWER ON DEMAND — your perfect breath, your way Default Setting: Gentle Airflow By default, we kept the intake valve to make airflow gentler — no direct blast to your nose, ensuring long-term comfort. Want Stronger Airflow? Prefer stronger airflow? Simply remove the yellow silicone intake valve — it's your choice. The air inlet valve of tranditional passive respirator can block the backflow of moisture and wet the filter, which reduces filtering effect and reduces filter life. However, PMPR's active continuous air supply can keep filters ventilated and dry, so there is no worry about this situation. COMFORT or POWER--Your Choice Enjoy comfort mode by default — or switch to power mode. You’re in control. PuriC

Especificaciones