Neoteck 9999 Counts 1000A AC/DC Digital Clamp Multimeter with Color Screen | TRMS Multimeter with Inrush VFD LOZ AC/DC Voltage Resistance Capacitance Frequency Continuity Diode NCV for Industrial HVAC

Descripción

Product description Professional Clamp Multimeter with True RMS for Electricians & HVAC Techs Neoteck clamp multimeter is designed for electricians, HVAC technicians, and industrial maintenance crews, ideal for troubleshooting motor drives, electrical panels, and distribution systems. Clamp meter ensures safe, accurate measurements in commercial, residential, and industrial settings. Reasons for Inaccurate Current Measurement Both wires clamped together If you clamp both the live and neutral wires, their currents cancel out, giving a near-zero reading. Always clamp only one wire. Wire not centered The wire should be placed in the middle of the clamp opening. Off-center placement reduces accuracy. Clamp not fully closed Dirt or a loose hinge can cause a gap, giving weak readings. Close the clamp tightly. If you hear a noise, open and close it again. If the noise stays, clean the dirty surfaces. Wrong range selected If the manual range is set too high (e.g., 200A for a 0.5A current), the reading may appear very low or inaccurate. Use auto-range or select a lower range. Current is too small Some clamp meters have poor resolution at low currents (e.g., below 0.1A). Try wrapping the wire around the clamp several times and divide the reading by the number of wraps. Low battery A weak battery can cause erratic or incorrect readings. Replace the battery if needed. Nearby conductors cause error Strong magnetic fields from other current-carrying wires near the clamp can affect accuracy. Try to isolate the wire being measured. True RMS Clamp Meter for Accurate AC/DC Measurements on Complex Waveforms Previous page Next page Measure current safely without cutting wires. This amp clamp multimeter features a LoZ mode to eliminate ghost voltages, a VFD mode for drives, and a dedicated Inrush Current mode to capture motor startup surges (60-1000A AC). These features make troubleshooting tripped breakers faster and safer. Versatile Amp Clamp Multimeter for Resistance, Capacitance & Continuity Previous page Next page Clamp multimeter is a complete electrical toolkit. Beyond AC/DC current and voltage, it precisely measures resistance, capacitance, diode status, and circuit continuity. 9999-count amp meter indispensable for comprehensive electrical diagnostics in automotive, HVAC, and industrial maintenance. Portable Clamp Meter Kit with Test Leads, Case & User Manual Get everything you need in one kit. This clamp multimeter comes with test leads, a user manual, and a convenient storage case. Its compact, rugged design makes this amp clamp multimeter easy to carry to any job site, ensuring you're always prepared for electrical testing and troubleshooting tasks. What should I do before using a clamp meter to avoid damaging it? Estimate current first. If you are not sure, start with the highest range, then switch to a lower range for a more accurate reading. Never measure large current on a small range – it can damage the meter. Why can't I measure current? Clamp only one wire – Never clamp both live and neutral together, or their currents will cancel out and the reading will be zero. Why is my clamp meter still showing no reading even though I clamped only one wire? Because that "single wire" might still contain both live and neutral inside (like a power cord). Their currents cancel out. To get a reading, you must clamp onto one of the phase wires. What should I do if the reading is not accurate when measuring a small current? If the current is too small for your clamp meter, try this trick:Wrap the same wire around the clamp several times (e.g., 5 or 10 turns).Then divide the reading on the display by the number of turns. How do I test voltage? Voltage is not measured with the clamp. You must use the test leads (red and black probes). Neoteck Clamp Meter Series for Home, Industrial, Laboratories, Factories, etc.. 9999 Counts Clamp Meter Add to Cart 6000 Counts Clamp Meter Add to Cart 4000 Counts Clamp Meter Add to Cart 6000 Counts Clamp Meter Add to Cart 2000 Counts Multimeter Add to Cart 6000 Counts Multimeter Add to Cart Pen Type Multimeter Add to Cart Customer Reviews 4.7 out of 5 stars 34 4.3 out of 5 stars 46 4.3 out of 5 stars 173 4.0 out of 5 stars 47 4.5 out of 5 stars 7,123 4.6 out of 5 stars 437 4.4 out of 5 stars 754 Price $49.95$49.95 $32.99$32.99 $23.99$23.99 $34.99$34.99 $27.99$27.99 $25.99$25.99 $16.69$16.69 Security Level CAT III 1000V CAT III 600V CAT III 600V CAT III 600V CAT III 1000V CAT III 600V CAT II 600V AC Current 100A/600A/1000A 6A/60A/800A 1A/40A/600A 6A/60A/800A 200uA/2000uA/20mA/200mA/10A 600uA/6000uA/60mA/600mA/6A/10A - DC Current 100A/600A/1000A - - 6A/60A/800A 200uA/2000uA/20mA/200mA/10A 600uA/6000uA/60mA/600mA/6A/10A - AC Voltage 1V/10V/100V/750V 600mV/6V/60V/600V 4V/40V/400V/600V 600mV/6V/60V/600V 2V/20V/200V/600V 6V/60V/600V 10mV-600V DC Voltage 1V/10V/100V/1000V 600mV/6V/60V/600V 400mV/4V/40V/400V/600V 600mV/6V/60V/600V 200mV/2V/20V/200V/600V 600mV/6V/60V/600V/600V 0.1mV-600V Capacitance 10nF

Características

• Ultimate Safety for Professional Use: Neoteck digital clamp meter boasts a CAT III 1000V / CAT IV 600V safety rating, delivering superior protection against high-voltage transients. It offers electricians and HVAC technicians maximum safety and compliance when troubleshooting main power supplies, industrial panels, and heavy machinery
• True-RMS & LoZ & VFD & Inrush Current Mode for Modern Systems: Engineered with True-RMS technology and VFD mode, this clamp multimeter accurately measures complex waveforms from variable-frequency drives and non-linear loads. It also features inrush current measurement and LoZ mode to prevent ghost voltage, ensuring precise diagnostics for motor-driven systems and industrial equipment
• All-in-One Electrical Diagnostics: This clamp meter multimeter offers comprehensive testing: 1000A AC/DC current, 750V AC voltage, 1000V DC voltage, temperature, capacitance, inductance, and NCV. Its 40mm jaw handles thick cables, making it ideal for industrial, automotive, and HVAC applications
• High-Readability Color Display with Analog Bar: Featuring a 9999-count color screen and real-time analog bar, this digital clamp multimeter ensures clear visibility of measurements and trends, even in low light. It supports efficient diagnostics in panels, crawl spaces, or bright environments
• Rugged and Field-Ready Design:Built with an IP54-rated housing, this digital clamp meter is resistant to dust, water, and shocks. It includes a heavy-duty canvas bag, making it highly durable and easy to transport across demanding job sites
• Complete Kit, Ready to Use:This clamp meter comes with test leads, a K-type thermocouple, batteries, alligator clips, and a screwdriver—everything needed to start measurements right out of the box, saving time and cost for professionals and DIYers
• Versatile Applications for Professionals & DIYers: Suitable for electricians, HVAC technicians, automotive enthusiasts, and skilled DIYers, this clamp meter performs reliably in industrial maintenance, motor diagnostics, vehicle electrical systems, and home projects
• Notes for Measurements: Firstly, for accurate current measurement,clamp only a single wire. Measuring multiple wires will give incorrect readings;Secondly, for best accuracy, ensure the ambient temperature is between 0°C and 40°C;Last but not least, the Inrush current function works only in AC mode(60-1000A) - not for DC measurements

Especificaciones