ODV-GBS-C RGBS/SCART/YPbPr/VGA to HDMI/VGA Scan Converter for Retro Gaming Console with US Plug - NO AV/Composite/RCA | VGA Max 60Hz

Descripción

Product description The ODV-GBS-C support dual screen output at the same time under different format. No extra zero delay is added to ensure the original feel. Click the scanline icon on the mobile phone control page to adjust the output scanline quality, make the game screen more retro, and increase the game experience. You can adjust the output image quality, size and position through the control page in your phone. Additional steps: 1. Use the R, G and B three-color knobs⑩,on the product to adjust the signal intensity of red, green and blue respectively. 2. Connect audio ④ to earphones or audio devices. 3. Use mobile phones, computers and other devices to open WIFI, find gbSControl to connect, the default password: qqqqqqqq, and then use the web login 192.168.4.1 to enter the control interface. 4. set the resolution as prompted. 5. To use the low solution output function, select the direct or 15kHz option in the Settings screen. 6.Retain the upgrade interface⑦, support firmware upgrade function, when the upgrade plug in USB and computer connection, press the control ticket lever, plug in the power and open the power switch can be upgraded. 7. The body is equipped with a control lever, with LCD control screen ⑧ that can achieve a variety of Settings. 8. Green synchronous switch ⑪, can adapt to RGBS signal 480P format (note: input of other formats can not be opened, otherwise the signal can not be recognized). NOTE: -Green synchronous switch adapts to RGBS signal 480P format only. Input of other formats cannot be opened, otherwise the signal can not be recognized -To use the low solution output function, select the direct or 15kHz option in the Settings screen -Scanline effect only supports 240p -Video cables are not included. Installation Settings: 1. Connect the HOST RGB output to THE SCART interface "1" of ODV-GBSC or the universal VGA input interface "2". 2. Connect the component color difference output to the component input YPBPR input interface "3" of odV-GBSC. 3. Connect the HDMI output of ODV-GBS-C "5" to the HDMI input of TV/monitor. 4. Connect the VGA output of ODV-GBS-C (4) to the VGA input of the monitor. 5. Connect the external power supply (6) and use the supplied 12V/2A power supply. Q1: Does this support AV composite, RCA, or S-Video input? A1: No. Supported inputs ONLY: RGBS/SCART, YPbPr Component, VGA (≤60Hz), and RGBHV. AV composite, RCA, and S-Video are NOT supported. Verify your console's output type before purchasing. Q2: The RGB knobs don't seem to work. Is this a defect? A2: Not a defect. RGB knobs only work with RGBS or RGBHV input signals. If you are using YPbPr (Component) input, the knobs will have no effect — this is normal behavior by design. Q3: I'm seeing a green tint or color shift in the image. How do I fix it? A3:Check your settings menu: the signal type selected must match your actual input cable. Wrong setting (e.g., RGB selected but YPbPr connected) causes color errors. Correct the setting to fix the issue. Q4: My screen shows black and white. What's wrong? A4: Black & white image usually means an AV/Composite signal is connected, which this device does NOT support. Verify your input source. Supported: RGBS/SCART, YPbPr, VGA (≤60Hz), RGBHV only. Q5: Does this support VGA at 70Hz (DOS games, old PC BIOS modes)? A5: No. VGA input supports 60Hz and below only. Non-standard BIOS modes and 70Hz+ refresh rates are NOT supported. Standard PC resolutions at 60Hz (640x480, 800x600, 1024x768 etc.) are supported. Q6: The clock generator error appeared on my unit. Is it broken? A6: Earlier units had a known clock generator hardware issue. Current production has resolved this. If your unit shows this error, please contact Mcbazel support — we will replace it promptly. Q7: Will this work with N64, GameCube? A7 Not alone. You must also purchase the Mcbazel ODV-II Converter (ASIN: B0B2WFTDGF) and use both together. This unit alone does NOT support N64, GameCube. Q8: How do I enable the scanline effect? A8: The scanline effect requires configuration in the settings menu — it is not enabled by default. Please refer to the user manual (available on the product page) for the exact steps to activate it. Q9: Does the 15kHz VGA output work automatically? A9: No. 15kHz VGA output must be manually enabled in the settings menu. It is NOT active by default. See the user manual for the exact setting location and steps to activate 15kHz output. Q10: What resolutions does this support for VGA output? A10: Supported VGA output resolutions include 640x480, 800x600, 1024x768, 1280x1024 and more standard resolutions. VGA input supports 60Hz or below. See the user manual for the full resolution list. Q11: I accidentally enabled a switch on the device and now there is no image. What happened? A11: The green sync switch (⑪) may have been enabled. This switch is ONLY for RGsB 480P signal. For all other inputs, it must remain OFF. Turn the switch OFF to restore the image. Q12: What is the WiFi password for

Características

• PLEASE READ BEFORE PURCHASING — Supported Input Interfaces: This converter accepts ONLY these 4 input types: RGBS/SCART | YPbPr Component | VGA (≤60Hz) | RGBHV. NOT SUPPORTED: AV Composite / RCA / S-Video / HDMI Input. VGA input does NOT support refresh rates above 60Hz (e.g., 70Hz DOS/PC BIOS modes are not compatible)
• Designed for classic retro gaming consoles. Converts YPbPr component and RGB signals to HDMI and VGA output for modern TVs and displays. Addresses common limitations found in converters such as OSSC. IMPORTANT: N64 / GameCube: This product alone does NOT support these consoles. You must also purchase the Mcbazel ODV-II Converter (ASIN: B0B2WFTDGF).
• Lag-Free Signal Processing & Supported Resolutions: Supports 240p, 480i, 480p input signal processing with no input lag Dynamic de-interlacing for 480i → progressive output Scanline effect: creates authentic CRT scanline appearance (configuration required — see user manual) Can output 480p/480i signals scaled to 240p resolution 15kHz output via VGA is supported but must be manually enabled in the settings menu — NOT active by default
• Supported VGA output resolutions include: 640x480, 800x600, 1024x768, 1280x1024 and more (see user manual for full list). VGA input: supports standard resolutions at 60Hz or below. Non-standard BIOS modes and 70Hz+ refresh rates are NOT supported. Does NOT support AV Composite, RCA, or S-Video input.
• Dedicated Audio I/O & RGB Color Calibration Knobs: Separate 3.5mm audio input and output — connect to earphones, speakers, or audio devices Three independent R/G/B adjustment knobs for fine-tuning red, green, and blue color output
• IMPORTANT — RGB Knob Compatibility: The R/G/B knobs are ONLY active when using RGBS or RGBHV input signals. If you are using YPbPr (Component) input, the RGB knobs will have NO effect — this is normal and expected behavior, not a defect.
• LED Display, WiFi Control & Firmware: LED display with front-panel control buttons for on-device settings WiFi control: configure wirelessly from PC or smartphone Powered by DC 12V / 1A adapter (US plug included) Firmware upgradable via USB to PC (see user manual for firmware update steps)
• Green Synchronous Switch — RGsB Signal Users Only: This device features a green synchronous switch designed specifically for RGsB signal in 480P format. IMPORTANT: Enable this switch ONLY when your input source outputs RGsB 480P signal For ALL other input types (RGBS/SCART, YPbPr, VGA, RGBHV standard), this switch MUST remain OFF Enabling this switch with non-RGsB sources will cause the signal to be unrecognized — you will see no image If you suddenly lose image after touching a switch on the device, check the green sync switch and turn it OFF.

Especificaciones