Projector Lamp Bulb for Sony LMP-H220 VPL-VW325ES VPL-VW295ES VPL-VW285ES VPL-VW365ES VPL-VW385ES VPL-VW290ES VPL-VW315ES VPL - VW270ES VW260ES VW255ES VW320ES Projector Replacement Lamp

Descripción

Product description Specifications: Brightness Mode: High & Low High - Increases the brightness, and projects brighter images. Low - Decreases the brightness, and enhances blacks by minimizing brightness. ***Life Time: Projector bulbs have a particular life span specified by the manufacturer. Usually, the duration of the bulb operation depends on its type, the environment it is utilized in, and the frequency of the projector use. Replacement Projector Lamp Bulb for Sony LMP-H220 Applicable LampPart #: LMP-H220 / LMP H220 For Sony VPL-VW325ES VPL-VW325ES-B VPL-VW325ES-W / VPL VW325ES VPL VW325ES-B VPL VW325ES-W Projector Lamp BulbFor Sony VPL-VW295ES / VPL VW295ES Projector Lamp BulbFor Sony VPL-VW285ES / VPL VW285ES Projector Lamp BulbFor Sony VPL-VW385ES / VPL VW385ES Projector Lamp BulbFor Sony VPL-VW365ES / VPL VW365ES Projector Lamp BulbFor Sony VPL-VW320 / VPL VW320 Projector Lamp Bulb For Sony VPL-VW290ES / VPL VW290ES Projector Lamp BulbFor Sony VPL-VW315ES / VPL VW315ES Projector Lamp BulbFor Sony VPL-VW320ES / VPL VW320ES Projector Lamp BulbFor Sony VPL-VW270ES / VPL VW270ES Projector Lamp BulbFor Sony VPL-VW260ES / VPL VW260ES Projector Lamp BulbFor Sony VPL-VW255ES / VPL VW255ES Projector Lamp BulbFor Sony VPL-VW245ES / VPL VW245ES Projector Lamp Bulb ***Note: This projector lamp is user-replaceable; refer to your projector's manual for installation instructions for this replacement lamp. When to Replace Your Projector Lamp LMP-H220 / LMP H220？ The projector keeps track of the number of hours the lamp is used and displays this information in the projector's menu system. Replace the lamp as soon as possible when the following occurs: • The projected image gets darker or starts to deteriorate. • A message appears when you turn on the projector telling you to replace the lamp. How to Replace Your Projector Lamp？ Installation Step 1: Replace the Projector Lamp 1. Turn off the projector and unplug the power cord. 2. Allow the projector lamp to cool down for at least one hour. 3. Use the screwdriver to loosen the screw securing the lamp cover. 4. Slide the lamp cover out and lift it off. 5. Loosen the screws securing the lamp to the projector. 6. Grasp the raised section of the lamp and gently pull the lamp out of the projector. 7. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right way. 8. Push in the lamp firmly and tighten the screws to secure it. 9. Replace the lamp cover and tighten the screw to secure it. Installation Step 2: Clean or Replace the Air Filter / Dust Filter You need to clean or replace the air filter to prevent the projector from overheating due to blocked ventilation. Clean the Air Filter: 1. Turn off the projector and unplug the power cord. 2. Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as a paintbrush). 3. If dust is difficult to remove or the air filter is damaged, replace the air filter. Replace the Air Filter: 1. Turn off the projector and unplug the power cord. 2. Carefully open the air filter cover. Pull the air filter out of the projector. 3. Place the new air filter in the projector and push gently until it clicks into place. 4. Close the air filter cover. Installation Step 3: Reset the Lamp Timer to Zero You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement message and to keep track of lamp usage correctly. 1. Turn on the projector. 2. Press the Menu button. 3. Select the Reset menu and press Enter. 4. Select Reset Lamp Hours and press Enter. You see a prompt asking if you want to reset the lamp hours. 5. Select Yes and press Enter. 6. Press Menu or Esc to exit the menus. Note: Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage information. Part Number: LMP-H220 / LMP H220 Lamp Type: 225W Compatible For Sony VPL-VW325ES VPL-VW325ES-B VPL-VW325ES-W / VPL VW325ES VPL VW325ES-B VPL VW325ES-W Projector Lamp Bulb For Sony VPL-VW295ES / VPL VW295ES Projector Lamp Bulb For Sony VPL-VW285ES VPL-VW385ES / VPL VW285ES VPL VW385ES Projector Lamp Bulb For Sony VPL-VW365ES / VPL VW365ES Projector Lamp Bulb For Sony VPL-VW290ES VPL-VW315ES / VPL VW290ES VPL VW315ES Projector Lamp Bulb For Sony VPL-VW320ES VPL-VW320 VPL-VW270ES VPL-VW260ES / VPL VW320ES VPL VW320 VPL VW270ES VPL VW260ES Projector Lamp Bulb For Sony VPL-VW255ES VPL-VW245ES / VPL VW255ES VPL VW245ES Projector Lamp Bulb What’s in the box: 1 x Projector Lamp with Housing; 1 x Instructions Sheet See More

Características

• 【Features】This LMP-H220 projector lamp assembly comes with a 225W bulb that is engineered to exactly match the projector manufacturer’s specifications. Excellent performance with optimal brightness and vivid image.
• 【Compatibility】The LMP-H220 replacement projector bulb for Sony VPL-VW295ES, VPL-VW315ES, VPL-VW325es, VPL-VW385es, VPL-VW290es, VPL-VW270es, VPL-VW260ES, VPL-VW255es, VPL-VW245es, VPL -VW320es projector lamp.
• More applicable models for Sony LMP H220, VPL-VW285ES, VPL-VW365ES, VPL-VW325ES-B, VPL-VW325ES-W projector lamp bulb replacement.
• 【Easy to Install】Rated with 225W power and it is designed to replace the projector lamp that comes with Sony projector. Good choice for a cost-effective backup.
• 【Assure】This projector lamp bulb protected by a 30-Day refund & 180-Day replacement warranty from the date of purchase.

Especificaciones