Cargando el producto…
Precio de origen
$ 247.872
$ 264.674
+ flete y aranceles — se calculan al cotizar
Compra protegida
Puerta a puerta
Aduana incluida
Product description Your Guide to Installing E-Z Products with Confidence Make post repair and reinforcement easy and economical. E-Z Spike Installation Secure the E-Z Spike 29 inches deep.Drive spike base into the ground using a short block. (Be sure to use a block smaller than the actual posts.)For best results, turn the block every few strikes. Take care to install spike base plumb.Attach post to spike base using four ¼” x 1 ½” Strong-Drive SDS Heavy-Duty Connector screws or four #10 x 1 ½” Strong-Drive SD Connector screws. E-Z Mender Installation For Dirt:Drive the E-Z Mender 11 inches down.Remove dirt and debris from around the existing post.Drive mender plate down along the post between the post and the dirt.Repeat on opposite side of the post.Attach to post using six #9 x 1 ½” or six #10 x 1 ½” Strong-Drive SD Connector screw.Fill the hole around the post with concrete. E-Z Mender Installation For Concrete:Drive the E-Z Mender 11 inches down.Remove dirt and debris from around the existing post.Drive mender plate down along the post, wedging it between the post and the concrete. Repeat on the opposite side of the post.Attach to post using six #9 x 1 ½” or six #10 x 1 ½” Strong-Drive SD Connector screw. E-Z Base Installation Attach base to concrete using four ½”-diameter anchors (screws and anchors not supplied).Fasten post in base using eight #9 x 1 ½” or eight 10 x 1 ½” Strong-Drive SD Connector screws.
Agregás al carrito
Sumás este y otros productos que querés traer.
Cotizás el envío
Calculamos flete aéreo y aranceles a Argentina.
Confirmás y pagás
Un asesor te contacta con el link de pago.
Lo recibís en casa
Tracking en tiempo real. Aduana incluida.
De la misma marca, empezando por lo más reseñado
Los mejor puntuados del mismo tipo de producto
Mismo tipo de producto y precio parecido
