🇺🇸 Estados Unidos3D Printing Filament

Sovol Filament Dryer 2026, SH01 Filament Dehydrator 3D Printer Spool Holder with Upgraded Fan, Dry Box for Keeping Filament Dry, Compatible with 1.75mm, 2.85mm PLA PETG TPU ABS

Name: Sovol Filament Dryer 2026, SH01 Filament Dehydrator 3D Printer Spool Holder with Upgraded Fan, Dry Box for Keeping Filament Dry, Compatible with 1.75mm, 2.85mm PLA PETG TPU ABS
Brand: Sovol
SKU: B09686Z5R3
Price: 80076 ARS
Availability: InStock
Rating: 4.2 (425 reviews)

4.2 · 425 reseñas

Precio desde

$ 25.102

+ flete y aranceles — se calculan al cotizar

Color

Opción 2

Compra protegida

Reclamamos al vendedor si el pedido llega con defectos.

Puerta a puerta

FedEx desde EE.UU. hasta tu domicilio en Argentina.

Aduana incluida

Gestionamos aranceles y despacho por vos.

Descripción

Product description Evenly distributed heating ports.Enough space for 2 rolls filament.Built-in fan makes heating more evenly. Two locking clips can lock the lid very tight and won't pop up the lip. Please open the PTFE plugs on the top of the box during heating for Moisture evaporation. Please put the filament rolls inside in this way to make the filament goes out more smoothly. User Guide How to place the filament into SH01? Place the filament into the filament outlet. Please note that the direction is placed counterclockwise so that the pulley at the bottom can feed better. What can you do if you have E0 or E1 error? If the screen displays E0 or E1, please open the drying box and check all the cable sockets on the motherboard to see if they are damaged or loose. If there is any problem, please feel free to let us know. We will send replacement for you. Compared to common PLA filamemt, is there anything need to know when you dry silk filament with SH01? Drying silk filaments at too high temperature will make them to melt and stick together. The recommended drying temperature is 45 degrees Celsius for 2 hours. Suitable Filaments Silk Tri Color PLA Add to Cart Matte Tri Color PLA Add to Cart Glow in The Dark PLA Add to Cart Light Change PLA Add to Cart Luminous PLA Add to Cart Gradient PETG Add to Cart Translucent TPU Add to Cart Customer Reviews 4.2 out of 5 stars 952 4.2 out of 5 stars 952 4.2 out of 5 stars 952 4.2 out of 5 stars 952 4.2 out of 5 stars 952 4.4 out of 5 stars 217 4.4 out of 5 stars 217 Price $17.99$17.99 $20.74$20.74 $19.99$19.99 $20.99$20.99 $17.99$17.99 $17.99$17.99 $18.99$18.99 Color Bronze Purple Green Matte Red Green Blue Glow Multicolored Light Change Purple Shiny Green Gradient Purple Clear Blue Material PLA PLA PLA PLA PLA PETG TPU Weight 1KG 1KG 1KG 1KG 1KG 1KG 1KG Diameter 1.75mm 1.75mm 1.75mm 1.75mm 1.75mm 1.75mm 1.75mm Dimensional Accuracy +/-0.03mm +/-0.03mm +/-0.03mm +/-0.03mm +/-0.03mm +/-0.03mm +/-0.03mm

Características

【Remove Excess Moisture】3D printer filaments are hygroscopic, moisture would cause printing failure. Sovol SH01, a great addition to 3d printer, can remove excess moisture, keep your filament dry and bring you better prints. The surface of prints will be smoother, the layer adhesion increased. No more brittle PLA, PETG, ABS filament
【Real-time Monitoring of Temp and Humidity inside】Displays the humidity and temperature in the dry box in real time. Setting temperature 40 °, 45 °, 50 ° C and setting time from 6 hours to 12 hours. If you use SH01 in a room with room temperature under 16℃, the temperature in the dryer box would not come up to 50℃. But do not worry, this would not decrease drying effect
【Excellent Power-off Drying Mode】Silicone & PTFE seal makes it possible to store filaments for a long time without power and protects your filaments from moisture and dirt. You can put 4 bags of desiccants (not included in the package) inside the dryer box to improve drying efficience & quality
【Large Capacity】 Sovol dryer box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Please open the PTFE seals on the top of the box during heating for Moisture evaporation
【Heating More Evenly】 The unique design of the built-in fan in the box is based on the principle of modynamics of air, makes the filament heated more evenly. SH01 makes drying more efficient. Any questions about the product please feel free to let us know. Our technical support team will provide service as soon as we can

Especificaciones

ColorWhite

Material typePolyethylene Terephthalate Glycol, Polylactic Acid, Polytetrafluoroethylene, Thermoplastic Polyurethane

Peso1.4 kg

Item diameter2.85 millimeters

Brand nameSovol

Additional featuresEven heating with built-in fan for efficient drying

Unit count1 Count

Number of items1

Warranty description1 Year Warranty

¿Cómo funciona la importación?

Agregás al carrito

Sumás este y otros productos que querés traer.

Cotizás el envío

Calculamos flete aéreo y aranceles a Argentina.

Confirmás y pagás

Un asesor te contacta con el link de pago.

Lo recibís en casa

Tracking en tiempo real. Aduana incluida.

Sovol Filament Dryer 2026, SH01 Filament Dehydrator 3D Printer Spool Holder with Upgraded Fan, Dry Box for Keeping Filament Dry, Compatible with 1.75mm, 2.85mm PLA PETG TPU ABS

Descripción

Características

Especificaciones

¿Cómo funciona la importación?

Sovol Filament Dryer 2026, SH01 Filament Dehydrator 3D Printer Spool Holder with Upgraded Fan, Dry Box for Keeping Filament Dry, Compatible with 1.75mm, 2.85mm PLA PETG TPU ABS

Descripción

Características

Especificaciones

¿Cómo funciona la importación?

Más de Sovol

Otros en Filamento de impresión 3D

Parecidos a este

Más de Sovol

Otros en Filamento de impresión 3D

Parecidos a este