Sram Disc Brake Pad Road/Level 1 Set Brake Shoes, One Size

Descripción

Product description SRAM HRD Road & Level ULT/TLM Brake Pads SRAM HRD Brake Pads are exactly what your calipers have been asking for. Designed with different materials for the perfect ride and stopping power under speeds. Reduced grams make for an easier ride uphill. Available in sintered, organic/steel, and organic/aluminum. See below for compound comparisons. Kit Components: Each pad kit includes two brake pads, a pad spreader spring, pad pin and clip. Product comes with brake pads per one caliper so you will need to get two kits. Proper Care Instructions: Once a compound is used with a rotor, only that compound should be paired with that compound in the future. Brake pads must be replaced if the total thickness of the backing plate and pad friction material is less than 3 mm. The rotor must be replaced if the total thickness is less than 1.55 mm, or when changing pad friction material. Black/Steel HRD Bike Brake Pads Color: Black. Material: SteelKnown to be quieter than a metal pad, and have more initial grab.Built from an organic and steel compound.Metal compound is best for riding in dry areas.Identified by an "M" printed on the back of brake pad. Bronze/Steel HRD Bike Brake Pads Color: Bronze. Material: SteelKnown to be quieter than a metal pad, and have more initial grab.Built from an organic and steel compound.Metal compound is best for riding in dry areas.Identified by an "M" printed on the back of brake pad. Grey/Steel HRD Bike Brake Pads Color: Grey. Material: SteelKnown to be quieter than a metal pad, and have more initial grab.Built from an organic and steel compound.Metal compound is best for riding in dry areas.Identified by an "M" printed on the back of brake pad. Silver/Aluminum HRD Bike Brake Pads Color: Silver. Material: AluminumKnown to be quieter than a metal pad, and have more initial grab.Built from an organic and steel compound.Metal compound is best for riding in dry areas.Identified by an "O" printed on the back of brake pad. Black/Steel Bronze/Steel Grey/Steel Silver/Aluminum Bike Brake Pad Replacement Instructions Brake Pad Thickness Check To determine if you need to replace your brake pads, first check their thickness. If they measure less than 3mm, it's time to replace them.Perform this step monthly to prevent damage to rotor. Piston Reset Remove wheels from bike, and use a pad spacer to push pistons back into the caliper.This resets the pistons to provide space for the new, thicker pads. Brake Caliper Inspection Remove circlip with needle nose pliers and the pin with a 2.5mm hex wrench.Remove pads from caliper.Clean caliper using isopropyl alcohol and a lint-free towel. New Bike Pad Replacement Make super the pad spreader spring is properly installed.Install pads into caliper. Install pin through caliper, pads, and spreader. Install circlip. Install pad spacer to ensure pistons are still pushed into caliper.Pull brake lever until contact point feels firm, and reinstall wheel. ABOUT SRAM RELENTLESS To be the best. It’s why you ride. It’s why we build components. The perfect combination of precision and brute force. No obstacles stopping us. No limitations slowing us down. Ours is a relentless pursuit: to make the climb shorter, the trail smoother, the turn tighter, the descent faster. To give you the strongest, lightest, quickest bike on earth. To be the best. A HISTORY OF INNOVATION SRAM was founded on a single product in 1987 and introduced the Grip Shift (or twist shift) shifter to the road bike market in 1988. In 1991 that technology was adapted for mountain bikes, and SRAM quickly grew. SRAM FUNDAMENTALLY BELIEVES THAT: Bicycles improve the environment.Bicycles ease traffic congestion.Bicycles reduce the cost of transportation.Bicycles improve health and reduce obesity. Cyclists are a passionate user group that support and enhance the areas in which they ride. SRAM’s products promote sustainability – they empower people to transport themselves and their families at low cost, to stay healthy, and to reduce pollution and improve community by reducing the use of fossil fuel-powered vehicles. SRAM is proud to deliver quality, exciting, sustainable products to its customers, but our obligation to social responsibility does not start and end with our products. We are also committed to improving our business practices to increase our positive impact on our employees, the people in our communities and those far away, and our planet itself. Our purpose statement is “We believe in the power of bicycles and expanding the potential of cycling. We create and manufacture components that inspire cyclists.” See More

Características

• High-performance sintered brake pads engineered for powerful and consistent stopping power on SRAM hydraulic road disc brakes, including Apex 1, Force 1, Rival 1, and Red eTap HRD models.
• Manufactured with durable steel backing plates and metallic sintered compounds, these pads deliver optimal heat resistance, long lifespan, and reliable modulation in all riding conditions.
• Designed specifically for SRAM Monoblock calipers and Level A1 systems, ensuring perfect fitment and seamless integration with your existing hydraulic disc brake setup.
• Ideal for road cycling, racing, and endurance events, these brake pads provide superior braking performance, enhanced control, and safety on demanding climbs and descents.
• Bulk pack options available for service-center repair stock, offering significant savings (40-50%) without aftermarket packaging, ideal for professional bike shops and repair shops seeking dependable replacement parts.

Especificaciones