STEPPERONLINE Closed Loop Stepper Motor 1 Axis CNC KIT 3.0 Nm/424.92oz.in 5.0A Nema 23 Motor with 1.5 Meter Cables & 0-7.0A 24-50VDC Closed Loop Stepper Driver CL57Y-V20

Descripción

This CNC kit included: *1 x CL57Y-V20: Y Series V2.0 Closed Loop Stepper Driver 0-7.0A 24-50VDC for Nema 17, 23, 24 Stepper Motor *1 x 23HS40-5004D-E1K-1M5: S Series Nema 23 Closed Loop Stepper Motor 3.00Nm(424.83oz.in) Encoder 1000PPR(4000CPR) *1 x CABLE-PC-2: RS232 debugging cable Motor Specification *Manufacturer Part Number: 23HS40-5004D-E1K-1M5 *Motor Type: Bipolar Stepper *Step Angle: 1.8deg *Holding Torque: 3.00Nm(424.83oz.in) *Rated Current/phase: 5.0A *Phase Resistance: 0.7ohms ± 10% *Inductance: 2.3mH ± 20%(1KHz) *Insulation Class: B 130°C[266°F] *Frame Size: 57 x 57mm *Body Length: 122mm *Shaft Diameter: Φ8mm *Shaft Length: 22mm *D-Cut Length: 15mm *Cable Length: 1500mm *Output Circuit Type: Differential type *Encoder Type: Optical Incremental *Encoder Resolution: 1000PPR(4000CPR) *Output Signal Channels: 2channels *Supply Voltage Min: 4V *Supply Voltage Max: 5V *Output Current: 100mA *Output High Voltage: 5V *Output Low Voltage: 4.5V *Output Frequency Max: 60kHZ Driver Specification *Output Peak Current: 0~7A(0~5 RMS) *Input Voltage: +24~50VDC(Typical 36VDC) *Logic Signal Current: 7~16mA(Typical 10mA) *Pulse Input Frequency: 0~200kHz *Pulse Width: 2.5μS *Isolation Resistance: 500MΩ

Características

• Closed Loop Stepper Motor Features: 1.8 degree step angle, 3Nm holding torque, 5A Rated Current, 2-phase, 4-lead
• Built-in Encoder: with 1000PPR(4000CPR) high resolution encoder, the stepper motor is featuring high speed, high torque, high precision and no loss of step
• Closed Loop Stepper Driver: This stepper motor driver has 400 - 40000 of microsteps, the maximum step count is 40,000 steps, allowing for extremely accurate operation with encoder feedback
• Voltage input range: DC24V-50V, a total of 16 subdivisions
• Suit for 3D printer/CNC machine/Carving Machine/Dispenser/Automation Application

Especificaciones