Stud Finder Wall Scanner 5 in 1 Upgraded Electronic Wall Scanner with Battery for Wood Metal and AC Wire Detection,HD LCD Display and Audio Alarm, Blue

Descripción

Product description Whether you are hanging pictures, putting up a new set of shelves or getting ready to start an addition, knowing where the studs are in a wall can be extremely handy! And A good stud finder can be the difference between a successful DIY home project and disaster. That is why a stud finder is important. FOLAI stud finder uses UPGRADED SMART SENSORS which can sense the change in density in the space behind the wall and locates the stud center with GREAT ACCURACY. You will not worry to drill many error holes on the wall while putting up a TV bracket, shelf unit, or even just a set of coat hooks on drywall. The wall detector features large LCD display, ergonomic design, and multi-sense technology for accurate detection of both metal and wooden studs. It will also detect live wiring up to two inches into walls. The four scanning modes (stud scan, deep scan, metal scan, and AC scan) make it ideal for both tradesmen and home carpenters. With this device, you can immediately find a suitable place on the wall without making any extra holes Stud Scan Detection This stud locator has 3 stud scan modes. Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in the 0.5in. or 1 in. StudScan Mode first. After you detect the center of an object, Please Use Metal Scan to determine if the reading in Stud scan mode was a wood stud, metal stud, or pipe. Metal Scan Detection FOLAI wall detector can locate metal studs in StudScan mode, DeepScan mode, and Metal Scan Modes. Since FOLAI stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs. Wire Warning Detection Wire Warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. For Safety, in all modes, this wall scanner always detects and indicates the Live AC Wire. Note: WireWarning Detection works in both StudScan / DeepScan / MetalScan Modes. The WireWarning Detection Icon will flash when live, unshielded wires are detected. Step 1: Calibrate the tool before every scan Place the whole device against the wall, then press and hold the calibration button( on the side of the tool) to calibrate this tool. Wait for the reducing bars to disappear and beep to confirm calibration has been completed. Step 2: Scan the wall After finishing calibration, please release the calibration button. Then move the stud finder along the wall slowly, if you shake or lift the scanner accidentally, the device needs to be re-calibrated. Step 3: Find the location of the stud When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object. Mark it with your pencil. Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. (More details refer to the above description of "Metal Scan Detection")Then you can drill it to hang the thing.

Características

• The most accurate and higher safety - stud detector is specially designed! The most advanced sensor technology is used to accurately and quickly locate the metal pipes, fire lines, studs, wooden frames, steel bars and supporting beams hidden behind walls, floors and ceilings. Whether you are a professional, homeowner or DIY enthusiast, you can find a good use in this electronic screw scanner
• 5 SCANNING MODES UP TO 60MM DEPTH - FOLAI stud locator has mufti-fuctions and can quickly and easily locates wood metal studs joists beams metal pipe rebar and live AC wire behind walls, floors, and ceilings. StudScan Mode scans through one layer of drywall up to 0.5 in.（12mm) and 1 in . (25mm) thick. DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. Deep Stud Scan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard
• WIRE WSRNNING INDICATOR, NO FEAR OF DRILLING INTO A LIVE WIRE - WireWarning Detection is up to 2 in.(51mm) deep. The added bonus is that the wire warning is ALWAYS ON while you are scanning in StudScan/DeepScan/MetalScan Modes, to alert you to the presence of live, unshielded electrical AC wires up to 2 in. (50 mm) deep, which helps you avoid drilling or hammering into a water pipe or electrical wire.Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in it
• LCD screen upgrade design, display the required stud material and the exact position of the stud - Digital stud scanner with large LCD display and loud warning, can detect the exact position of the object. When the material is found, the LCD display will beep to tell you if you are close to the target. Fast detection saves time and energy for users and makes task completion easier
• Professional Design with Top Quality - FOLAI has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. This stud joist finder wall detector can quickly locate the metal wood AC wire that are hidden in the walls, floors and ceilings of your house, help you find the exact stud while installing TVs, cabinets, garage shelves etc

Especificaciones