TLP-528C Network Cable Tester, RJ11 RJ45, Ethernet Wire Tracer Toner for CAT5/CAT6 with Continuity & QC, LAN and Telephone line Finder, Suitable for Cable Maintenance and Sorting - Green

Descripción

Network cable tester usage scenarios: Home network micro-repair: Save money on electricians while improving your quality of life Engineer Wiring: Easily maintain and organize cables to improve your work efficiency Automotive circuit checking and finding: trace and maintain complex wiring harnesses to make you safer on the road How to use network cable tester: 1.Scanning the cable: Insert one end of the cable into the transmitter port, press the switch to turn on the device, use the receiver probe to adjust the sensitivity to find the target cable, the fastest frequency of buzzing sound from the receiver is the correct cable. 2.PAIR Connect the cable ends to the transmitter and receiver unit respectively. Slide the switch to any position to activate the device. Use the LED indicators to determine the physical status of the cable. (1) If wiring is correct, the indicator light sequence on both the transmitter and receiver unit will be: 1-2-3-4-5-6-7-8 (G light illuminates for shielded cable). (2) The following indicate abnormal connections: ① If one wire (e.g., Cable NO.2) is open-circuited, neither the NO.2 indicator on the transmitter nor the receiver will illuminate. ② If multiple wires (3 or more) are disconnected, none of the indicators will illuminate. ③ If the cable ends are reversed, e.g., NO.1 and NO.2 swapped, the display will be as follows: transmitter: 1-2-3-4-5-6-7-8 / receiver: 2-1-3-4-5-6-7-8 3.QC Press and hold the function key to switch to “QC” mode, then Insert the cable crystal head into the top of the transmitter, if all the QC lights on the transmitter are on, it indicates that the crystal head is crimped correctly. FAQs: Q: Why does the receiver keep beeping during network cable fault detection? A: If you wish to use the fault detection function, please set the transmitter to “PAIR” mode without turning on the receiver. Please note: when the receiver is on, if you select both “PAIR” and “SCAN” on the transmitter and connect the cable ends to the transmitter and receiver, the receiver will emit a continuous beep, which is a normal phenomenon. Q: Why does the receiver beep for every wire during tracing? For long-distance tracing, set the receiver sensitivity to maximum, then lower it gradually until the target cable is located. If not reduced, strong nearby signals may cause continuous buzzing. To confirm you’ve found the correct cable, please set the transmitter to ‘PAIR’ and insert the cable end into the receiver port. If both panels’ LEDs light up, it’s the correct cable. What will you get: 1 TLP-528C with dual RJ11 RJ45 interface, 1 user manual, 4 * 1.5V AAA batteries, 1 storage box

Características

• Anti-interference Cable Tracer: TESMEN TLP-528C can cable tracking, line positioning, suitable for CAT5/CAT6 cables, non-metallic durable sensitive probe can help you quickly find the required cables in cable bundles, under carpets, decorative walls, and ceilings. It is a good helper for engineering wiring, daily network and equipment maintenance
• Find line faults: Test line sequence and continuity, and use the LED line sequence indicator to visually check whether the network cable is connected incorrectly; QC crystal head crimping inspection provides thorough cable quality inspection,and quickly feedback on the LED light, which can effectively improve your work efficiency
• Portable and Durable: Compact and lightweight design for easy portability. Featuring a high-quality plastic shell and non-slip silicone, its robust structure ensures both durability and stability. Ideal for home wiring, IT equipment setup, electrical maintenance, and LAN DIY projects
• Detachable design: The main control unit and remote unit can be separated and used independently, allowing you to test both ends of long cables. This makes it ideal for wall-mounted ports, long-distance cabling, or structured cabling systems, perfect for homes, offices, or professional IT environments
• What you will get: 1 TLP-528C with dual RJ11 RJ45 interface, 1 storage box, 1 user manual, 4 * AAA batteries

Especificaciones