TOMALL 78.7''x12'' Dark Black Vinyl Film for Car Headlight Taillight Fog Lights Tint Self Adhesive Decals Sports Modification Car Stickers (Dark Black)

Descripción

★ VINYL FILM ★ THE PACKAGE INCLUDES: 1 vinyl film (200cm x 30cm). INSTALLATION DETAILS | 1. Clean the car lights and spray water. . After you cut to the required size, tear off the bottom 2 layers of paper and spray water on the back glue of the film. (Convenient to adjust the position). 3. Start heating with a hot air gun on one side and scrape with a scraper to remove water and air bubbles and make the film more adherent. 4. Cut the excess film with a knife and heat the edge of the film with a hot air gun to make it more adherent. TIPS: > During our installation process, we found that we can glue the relatively stable place first, then fix the irregular spot, which will make the installation process easier. FEATURES: * Vinyl material, heat resistant, waterproof and stretchable. * Personalized decoration, both day and night, turning on the lights can make the lights more beautiful. * A hot air gun is required to stretch the film to fit the car lights during installation. SPECIFICATIONS: Material: vinyl material. Dimensions: 78.7 '' x 12 '' / 200cm x 30cm Color: Dark Black / Light Black / Golden Yellow / Orange / Light Blue / Navy Blue. Application: This film can be attached to headlights, fog lights and taillights to change the color of the headlights. NOTE: 1. Dark black is recommended for the taillights. 2. Due to manual measurement, please allow 1-3mm deviation. 3. If you have any problems, please leave us a message and we will answer your questions.

Características

• ✔Vinyl Film - The size of this sticker is 78.7'' x 12'' (200cm x 30cm). It is made of vinyl material, stretchable, heat-resistant and waterproof, and comes with a self-adhesive, which makes it easy to stick.
• ✔Change Color - This film can be used to change the color of your car's headlights/taillights/foglights, which is very personalized. Note: For your safety, it is recommended that the dark black film is only used on the taillights.
• ✔How to Install - Clean the dust of the headlights and spray water, then tear off the two layers of the sticker, spray water on the adhesive, to facilitate adjustment when pasting, and heat with a hot air gun during the installation process so that the sticker can be Stretch and stick to the lights, and use a scraper to remove water and air bubbles to make the sticker more fit.
• ✔Attention - When using a hot air gun, do not continue to blow the same place for too long, otherwise the film will be too hot and the film will be uneven or scratched when it is scraped. Just use hot air evenly. TIPS: If you are worried that you cannot install it well, or want to save time, you can ask a professional to install it.
• ✔Come and Buy - The package contains 1 roll vinyl film, the size is 78.7'' x 12''/ 200cm x 30cm, which can meet your requirements. If you have any questions about the product, you can contact us by email, and we will try our best to solve the problem for you.

Especificaciones