Cargando el producto…
Precio de origen
$ 38.208
$ 90.997
+ flete y aranceles — se calculan al cotizar
Compra protegida
Puerta a puerta
Aduana incluida
Product description TOMOON Humidifier Water Solenoid Valve The 4040 by TOMOON is a replacement humidifier solenoid valve manufactured for all humidifiers except residential models 110, 112, 330, 350, 360, 445, 800, and commercial models. The solenoid valve turns water on and off to your humidifier but does not regulate volume which is done by a different part called an orifice. Contains pre-installed strainer in the inlet side of the valve for capturing clogging elements in the water such as dirt and sand. Uses pre-existing compression fitting on the outlet side. Electrically operated and uses 24 volts and 2.3 watts Specifications: Watts: 2.3 watts PSI: 125 Volt: 24 V Orifice: 3/32 inch, 1/4 inch Model No: B2015-S85/ B2017-S85 -Both the inlet and outlet are threaded 7/16"-24 UNS for accepting a compression fitting for ¼" tubing. -Includes compression nut, washer and inline strainer. -The inlet includes the compression fitting & ferrule. -For the outlet, your existing compression fitting is reused. Material: Brass body and stainless steel valve seat the solenoid is made of solid brass material, durable and sturdy, well-tested by the manufacturer.Non original aftermarket part. Fits OEM Standards! Installation steps: ►Firstly, disconnect the humidifier and shut off the water supply to the unit. ►Secondly, remove the solenoid. Unclip the wires from the solenoid. Using the adjustable wrench to unscrew the compression nut and then remove the distributor and tubeLet remaining water drain into the plastic container. Disconnect the water supply. Use a screwdriver to unscrew the screws and discard the old ►Thirdly, install the solenoid. Alian the new solenoid and then tiahten the screws. Connect the water supply line. Replace the distributor tube and tighten the compression nut ►Finally, connect the wires to the solenoid and reconnect the humidifier. Tools needed for installation：Adjustable wrench，Phillips head screwdriver Correct Models Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768 Incorrect Models Does not work on models 330, 445, 110, 112, 350 and 360 See More
Agregás al carrito
Sumás este y otros productos que querés traer.
Cotizás el envío
Calculamos flete aéreo y aranceles a Argentina.
Confirmás y pagás
Un asesor te contacta con el link de pago.
Lo recibís en casa
Tracking en tiempo real. Aduana incluida.
De la misma marca, empezando por lo más reseñado
Los mejor puntuados del mismo tipo de producto
Mismo tipo de producto y precio parecido
