🇺🇸 Estados UnidosMotion Detectors

Vehicle Loop Exit Sensor Detector PD132 Single Channel Inductive for Car Parking Lot Access Gate Traffic Control and Time

3.5 · 7 reseñas

Precio de origen

$ 47.328

$ 50.951

+ flete y aranceles — se calculan al cotizar

Compra protegida

Reclamamos al vendedor si el pedido llega con defectos.

Puerta a puerta

FedEx desde EE.UU. hasta tu domicilio en Argentina.

Aduana incluida

Gestionamos aranceles y despacho por vos.

Descripción

Product description PD132 Single Channel Inductive Vehicle Loop Detector The vehicle loop detector is mainly used to detect the existence and passing of vehicles. Widely application for gate operators, garage doors, traffic sensors, vehicle sensors alarm applications. Specifications: Supply voltage 220VAC Power 4.5VA Output relays 240V/5A Operating temperature -20~65°C Storage temperature -40~85°C Frequency range 20 kHz to 170 kHz Temperature compensation 50°C/ h Reaction time 10ms Signal holding time Unlimited/limited Sensitivity Higher:0.02%, high:0.05%, low:0.1%, lower:0.5% Loop inductance Total loop plus connection wiring: 50μH to 1000μH. Ideal is 100μH to 300μH Loop connection wiring 200 meters long. The total resistance is less than 80hm, twisted at least 20 times per meter Relative humidity <90% No condensation Weight 283g Package included 1 x Vehicle Loop Detector Package included 1 x manual

Características

APPLICATION: The vehicle loop detector is mainly used to detect the existence and passing of vehicles. Widely application for gate operators, garage doors, traffic sensors, vehicle sensors alarm applications
PULSE RELAY SELECTION: The pulse relay may be configured to energize on detection of a vehicle or when the vehicle leaves the loop, sensitivity boost this feature sets the undetected level to maximum sensitivity and is used to prevent loss of detection of high-bed vehicles
RESET SWITCH: The reset switch enables the detector to be manually reset during commissioning and testing. This results in the detector re-tuning the sensing loop and becoming ready for vehicle detection selectable pulse time. This feature sets the length of time that the pulse relay will be energized for 1 Second or 0.5 Seconds
SWITCH SELECTABLE SENSIBILITY: 4 sensitivity setting are available on the switches to allow flexibility in configuration switch selectable frequency, 4 frequency settings are available to prevent cross-talk between adjacent loops
FILTER OPTION: The option can be used to provide a delay between detection of the vehicle and switching of the output relay . This relay is normally used to prevent false detection of small or fast moving objects Permanent option: this feature ensure detection of the vehicle will be maintained when the vehicle is parked over the loop for extended periods

Especificaciones

Material‎Electronic Component

Dimensiones‎5.12 x 3.15 x 1.97 inches

Peso‎10 ounces

Finish‎Finish

Power source‎PowerSource

Voltage‎1 volts

Installation method‎InstallationMethod

Item package quantity‎1

Included components‎inc

¿Cómo funciona la importación?

Agregás al carrito

Sumás este y otros productos que querés traer.

Cotizás el envío

Calculamos flete aéreo y aranceles a Argentina.

Confirmás y pagás

Un asesor te contacta con el link de pago.

Lo recibís en casa

Tracking en tiempo real. Aduana incluida.

Vehicle Loop Exit Sensor Detector PD132 Single Channel Inductive for Car Parking Lot Access Gate Traffic Control and Time

Descripción

Características

Especificaciones

¿Cómo funciona la importación?

Vehicle Loop Exit Sensor Detector PD132 Single Channel Inductive for Car Parking Lot Access Gate Traffic Control and Time

Descripción

Características

Especificaciones

¿Cómo funciona la importación?

Más de Fafeicy

Otros en Detectores de movimiento

Parecidos a este

Más de Fafeicy

Otros en Detectores de movimiento

Parecidos a este