VINGLI Suction Pool Cleaner, Automatic Wall-Climbing Vacuum -Navy Blue | For both above-ground & inground pools, powerful suction climbs walls & floors, 33FT hoses included, Works with ≥3/4HP pump

Descripción

Product description Clean area note In order to peotect vacuum, the cleaner can work on curved surfaces but do not clean the stair on the pool Cleaning type The pool vacuum can clean fine objects but can not clean leaves. Underwater work Just drop into the base of pool and the max deep is 9.8ft. Product specification Vacuum head, blue skirt and hose size display. Accessories display Comes with ten hoses, two weight, one regulating valve, diaphragm. If the hose is too long or too short, you can increase or reduce hose. Hose diameter Each hose diameter is 1.96 inch. There a special hose which need to connect to pool vacuum, and other hose neen to connect with that. Ten hoses Come with 10 hoses total 33 ft, each hose is 3.3ft. White little weight function White little weight can keep balance when you clean the pool and seal the hose. Blue disc installation Need to install the blue disc counterclockwise. No air in hoses In order to get great usage effect, should be no air in hoses before using. Make sure the hoses in no leak and the pressure is normal. Diaphragm The diaphragm is silent and service life is 200 hours. NOTE: Please refer to the steps in the instructions carefully when installing to prevent problems in the operation of the the cleaner. Here are some troubleshooting solutions. Problem: This vacuum does not move or has no suction ● .Check your pump, this vacuum requires at least a 3/4hp swimming pool pump or 1600ghp to function properly. If the pump power is too high, the cleaner will suck the pool floor or other places, if the pump power is too low, suction is not enough, the cleaner will also can't work. If the pump power is as required, suction is still too large, you can adjust the regular valve (parts I). ● .Check the diaphragm. Check diaphragm for damage. Or open the cleaner to see if the diaphragm is closed. The diaphragm should be closed when not in operation. ● .When adjusting the regular valve(parts I), if the cleaner suction is large, you can open the regular valve to disperse the suction. If the suction of the cleaner is too small, you can close the regular valve and let the suction all pass through the water pipe. ● . Be sure to fill the pipes with water. There must be water in the hoses and cleaners, and no air in it. If there is air inside the water pipe, it is also can't work. Problem: This vacuum doesn't work. First, the hose must be vented first and there must be no gas in the hose and you need make sure the hose in no leak and the pressure is normal. ● Check if the pump is ON and / or primed. ● Check Cleaner head for blockages. ● Clean and empty pump basket and empty skimmer/weir basket. ● Check the diaphragm. Check diaphragm for damage. Or open the cleaner to see if the diaphragm is closed. The diaphragm should be closed when not in operation. ● Ensure the filtration system is thoroughly cleaned. Clean sand/cartridge filters on your pool pump as per manufacturers specifications. ● Inspect the regulator valve and flush away any debris build-up. ● Check the Mat for wear. ● Make sure the curved tips of the Mat are facing upwards. ● Ensure that the skimmer/weir vacuum lid is fitted correctly and check for cracks. ● Check the hose for blockage. ● Check the hose for leaks by lifting each section above water while pump is running.

Características

• Warm Tips: Please notice that it doesn't include a power supply and requires at least a 3/4 hp swimming pool pump or Minimum Flow of 1700 gal/hr. We recommend to adjust the weights and the regulator valve to get the best results for a clean pool. If the vacuum doesn’t work, please check diaphragm especially of the diaphragm mouth inside see if there is a gap inside and check if any small rock stuck in the diaphragm.
• Save Your Time, Make Your Life Easier: VINGLI suction pool vacuum provide a quick and easy way to clean your swimming pool. No jamming or breaking interrupting the cleaning process. It keeps the pool clean, and it will cut down a lot on your time spent cleaning the pool.
• Great Suction Power & Can't Stuck: This automatic pool cleaner for in-ground pools thoroughly cleans swimming pools including the walls! This pool vacuum can efficiently cleane your pool. Wheel Deflector for movement around tight corners. Scuff-resistant Long-Life Hoses eliminate scuffs on all pool surfaces.
• Easy to Set Up & Efficient Cleanning & Super Quietly: Our pool vacuum cleaner is very easy to assemble and install and allows you to clean your pool effortlessly and quietly, unlike some other automatic pool cleaners that make an annoying hammer noise. Low noise, very quiet.
• Worry-Free Guarantee : One year warranty, if any part of this item broken you can contact us for a free replacement.We go above and beyond to provide the highest quality product. If you have any questions or concerns about your order,please keep in touch with us, we’ll always provide you a timely and satisfying solution.
• Includes Free Hoses . This pool vacuum comes with ten 3.3FT heavy-duty replacement hoses. Simply connect the cleaner to your current filtration system for seamless operation. The hose diameter is 1.5 inches.
• First-Time User Instructions:1. Ensure all hoses are tightly connected! 2. Completely bleed all air from the hoses! 3. Check the pump's suction power!

Especificaciones