Watch Press Tool, Back Case Closer for Closing the Cover

Descripción

Product description This watch press tool applies pressure by rotating the top handle, allowing you to easily and flexibly control the pressure during operation, thereby effectively reducing the risk of damaging the watch lens caused by uneven pressure How to choose the right die correctly? Choose front die The size of the die needs to just fit the watch steel ring, not larger or smaller than the steel ring Choosing the right die Too large die selection may cause the adjustment knob to be crushedChoosing a die that is too small may cause the watch glass to be crushed Select the watch back cover die The size of the die must be smaller than the back cover of the watch and cannot be larger than the edge of the back cover of the watch Suitable for round dials with diameters ranging from 18mm to 48mm; not suitable for square, oval, or other shaped watches. Before fitting the case back, place the included black fiber cloth between crystal and die. The cloth protects the crystal against scratches and adds friction to keep the watch stable during pressing. How to use it to work? Step 1 Turn the handle to raise the screw height, leaving enough space for placing the die. Step 2 Place the front die, fiber cloth, watch(The back of the watch is facing up) and back cover die in sequence, adjust the balance of the front and rear die to ensure there is no offset Step 3 Slowly turn the rotary handle of the watch press tool and press the back cover of the watch Package Included: 1 x Watch Press Tool12 x die1 x Fiber cloth

Características

• This watch press tool applies pressure by rotating the top handle, allowing you to easily and flexibly control the pressure during operation, thereby effectively reducing the risk of damaging the watch lens caused by uneven pressure
• Suitable for round dials with diameters ranging from 18mm to 48mm; not suitable for square, oval, or other shaped watches. Only compatible with watches equipped with pry-open case backs; not applicable for watch cases with multiple grooves or screw-on backs
• Before fitting the case back, place the included black fiber cloth between crystal and die. The cloth protects the crystal against scratches and adds friction to keep the watch stable during pressing
• Simple Operation: 1. Select the proper size die (refer to details page for selection guide). 2. Place die and watch in position, adjust upper and lower balance and ensure proper alignment. 3. Slowly rotate the handle of the watch press tool to close the watch back cover
• Important Note: The watch and case must remain stationary during back cover fitting. Shifting may lead to unsuccessful assembly or watch damage. Standard watch press tools lack precise control over pressing force and speed, and sudden pressure can cause watch displacement. Our tool features a rotary handle for slow, steady pressing and lowers the risk of watch movement

Especificaciones