10 Inch Chainsaw Chain For Milwaukee 49-16-2759,M18 FUEL TELESCOPING POLE SAW3013-20，3013-21 (3 Chains)

Descripción

Product description FITS THESE POPULAR MODELS: Milwaukee 49-16-2759,M18 FUEL TELESCOPING POLE SAW3013-20，3013-21 Premium Raw Material Sharp & Long-lasting For most of the saw chain components, DATSON uses 68CrNiMo GCr15 imported from Germany, the same raw material used by STIHL, which creates a higher cutting capacity. L Lubrication System L Lubrication System Extends the chain life by delivering lubricant to key parts of the chain, reducing downtime and maintenance and increasing efficiency. Japan Plating Tech Chrome Plating Tech All cutters are electroplated with the industrial hard chrome for better sharpness and longevity. Hardened Rivets Hardened Rivets DATSON hardens and quenches all rivets to improve its strength for fewer chain tension adjustment. Blue Rigid Components Nickel-plated tie straps The precise and controlled tempering process creates ablue diamond surface that provides you with high quality corrosion resistance and Maintain the presence of oil. HOW TO DETERMINE YOUR CHAIN SIZE Chainsaws can be equipped with different guide bars. When selecting a chain for your chainsaw, in addition to the model and length, make sure that the pitch, gauge and number of drive links are correct. You can usually find them on the guide bar side stamp or in the owner's manual. How to tighten chainsaw chain properly? 1. Disengage the chain brake 2. Loosen the bar nuts 3. Lift the tip of the guide bar 4. Tighten the tensioning screw until the chain sits snugly against the bottom rail of the bar without slack and still rotates freely 5. Re-tighten the bar nuts How to reduce the risk of kickback? If you are not experienced with chainsaws, use a low kickback chain (ANSI standard). Also, never saw using the "kickback danger zone" on the guide bar (the top of the bar tip); use the underside of the bar instead. What is ANSI? The safety standard "B175.1" set by the American National Standards Institute (ANSI), which outlines requirements for gasoline-powered chainsaws (chains), including provisions designed to reduce the risk of kickback injuries when cutting wood. How often should chainsaws be lubricated? Should I use a special lubricant for chainsaws? - Fill the reservoir with lubricant every refueling and ensure the lubricant is properly delivered to the chain during operation. Improper lubrication can cause excessive wear, reduce cutting efficiency and increase the risk of chainsaw damage - Yes

Características

• 10 Inch Chainsaw Chain .325” Pitch .043" Gauge 46 Drive Links -Fits Milwaukee 49-16-2759,M18 FUEL TELESCOPING POLE SAW3013-20，3013-21 (3 Chains)
• 【Smooth Cutting】 Germany steel with heating temperature control and punching system make better toughness, Flatness. All saw chain rivets hardened and quenched, resists wear and improves strength, reducing chain tension changes
• 【Wear Resistant】Japanese chrome-plated technology creates better durability for cutters, and each of them was grinded and cold-headed with Rotary machines, becomes sharper than ever
• 【Lubrication System】Built-in automatic oiling system extends the life of your chain by delivering oil to key parts of the chain so you can work smarter with less downtime and maintenance
• 【Durable and Reliable】long-lasting sharpness right out of the box lets you postpone sharpening for longer plus reduces kickback, while a precisely balanced combination of materials and manufacturing processes produce a highly durable chainsaw blade

Especificaciones