134Pcs Breadboard Kit Solderless 830 * 2 & 400 * 2 Tie Points Boards

Descripción

Descripción del producto Por qué te encantará Nuestro producto: La marca Prdiozyn fue fundada por un grupo de excelentes geeks que se unieron debido a un pasatiempo común. Tenemos el mismo anhelo de la máxima rentabilidad y una vida de alta calidad, lo que nos unió para comenzar un negocio juntos. Nuestro equipo de selección de productos tiene requisitos estrictos para los productos, de modo que los productos que seleccionamos pueden optimizar y mejorar nuestras vidas con la mayor rentabilidad. Nuestro producto As an essential device for electronics beginners, classroom teaching, DIY projects, and product prototype verification, it is widely compatible with mainstream development boards such as Arduino, ESP32, and Raspberry Pi. A total of 130 high-quality wires A widely used solderless prototyping tool for 3.3V, 5V and other common low-voltage circuits. It has elastic tin‑plated phosphor bronze contacts for stable, reliable connections, preventing looseness and short circuits. With standard 2.54mm pitch, it fits 20‑29 AWG (0.3‑0.8mm) wires and component pins. The top and bottom distribution blocks are horizontally connected and split in the middle for safe power routing. No soldering needed—ideal for education, testing and IoT prototyping. A breadboard consists of two key components: an insulating panel and internal conductive parts. The surface is made of ABS or PP plastic with clear hole markings, divided into a central IC circuit area and upper and lower power distribution strips. Inside, elastic metal clips, typically tin-plated phosphor bronze, are embedded to establish electrical connections between holes. In a standard design, holes on the upper and lower power rails are horizontally connected and split in the middle, facilitating positive and negative power access. Holes in the central area are vertically connected in columns, allowing direct insertion of component leads and circuit connection with jumper wires. Parameter List A widely used solderless prototyping tool for 3.3V, 5V and other common low-voltage circuits. It has elastic tin‑plated phosphor bronze contacts for stable, reliable connections, preventing looseness and short circuits. With standard 2.54mm pitch, it fits 20‑29 AWG (0.3‑0.8mm) wires and component pins. The top and bottom distribution blocks are horizontally connected and split in the middle for safe power routing. No soldering needed—ideal for education, testing and IoT prototyping.

Características

• Material de 【tercera generación】 Prdiozyn de alta calidad Construido con plástico ABS duradero Leyenda de color en tiras de distribución. Garantiza un contacto seguro y resistencia a la corrosión para pruebas de circuitos a largo plazo y proyectos de bricolaje.
• 【4 PIEZAS Surtido de tablas de empalme】 2 x 830 puntos (630 puntos de unión área de circuito IC + 2x100 tiras de distribución de puntos de unión) y 2 x 400 puntos (300 puntos de unión área de circuito IC + 2x50 tiras de distribución de puntos de unión) tablas de empalme sin soldadura. Cuenta con 4 rieles de alimentación y leyendas de colores para facilitar la construcción de circuitos.
• 【130 PCS Flexible Jumper Wires】130 pre-crimped jumper wires, compatible with 20-29 Awg (0.3-0.8mm) wire. Made of braided copper and plastic housing, offering flexibility and reliable connections.
• 【Self-Adhesive Solderless Breadboard】A solderless device with metal strips underneath connecting holes on top. Note that top/bottom rows connect horizontally and split in the middle while the remaining holes connect vertically. Equipped with peel-off adhesive tape on the back for easy mounting on shields or PCBs; boards can be spliced together.
• 【Wide Compatibility】Perfect for Arduino based DIY, Raspberry Pi projects. Essential tool for students, engineers, technicians, and hobbyists in STEM education and circuit prototyping.

Especificaciones