20 Pieces 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Down Power Supply Buck 800mA Module

Descripción

Features:20 Pieces 3 pins AMS1117-3.3 DC 4.75V-12V to 3.3V voltage regulator power supply buck 800mA module Easy to install: Please read the wiring diagram (included) carefully before using, simple dual-panel design and the input output using the 3 pin single row pin for easy connection, the input voltage is higher than output voltage 1.2V, the module will work normally. AMS1117-3.3 is a positive voltage regulator power supply module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.Applicable occasions:The 3 pins AMS1117-3.3 voltage regulator mini power supply is compatible with Arduino MEGA2560, MSP430 Development Board, 3.3V Low power consumption MCU, FPGA/CPLD PLD Programmable Logic Systems, ARM7 ARM9 ARM11 STM32, etc.Specifications:Output current: 800mALine adjustment rate: 0.2% (maximum) Load regulation: 0.4% (max.) Package Type: SOT-223Operating junction temperature range: -40 to 125°CWelding temperature (25 seconds): 265°CStorage temperature: - 65-150°COutput voltage: 3.267 to 3.333V (IOUT: 0 to 800mA, VIN :4.75V to 12V) Line adjustment (maximum): 10mV (VIN :4.75V to 12V) Load regulation (maximum): 15mV (VIN = 5V, IOUT: 0 to 800mA) Voltage difference (maximum): 1.3VCurrent limit: 900-1500mAQuiescent Current (Max): 10mARipple suppression (minimum): 60dBSize: 8.6 x 12.33 mmPackage includes: 20 x AMS1117-3.3 modulesNote: Please do not exceed operating voltage, or it will be damaged easily.Exceeding the maximum allowable power consumption will result in excessive chip temperature.Can not reverse polarity, or it will result in short circuit.The manufacturers' names and part numbers have been mentioned above for purposes of demonstrating compatibility, not as trademark, our trademark is Frienda.

Características

• How to install: please check the product pictures carefully for the wiring diagram steps before using, simple dual-panel design and the input output using the 3 pin single row pin for easy connection, the input voltage of the 3.3v regulator is higher than output voltage 1.2V, the module will work normally; AMS1117-3.3 is a positive voltage regulator power supply module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output
• Electronic devices partner: the ams1117 3.3v voltage regulator, can be applied to electronic devices which need 3.3V power supply, such as SCM project design, MCU development and more, easy to be connected and provide the power supply
• Compatible with: the ams1117 3.3v is compatible with Arduino MEGA2560, MSP430 development board, 3.3V low power consumption MCU, FPGA/CPLD PLD programmable logic systems, ARM7 ARM9 ARM11 STM32, etc.
• Provide more safety: the auto-plaza 3.3v voltage regulator features overheat shutdown circuit provides overload and over-temperature protection, no worry about safety and bring you more convenience; Operating junction temperature range: -40 to 125°C, welding temperature (25 seconds): 265°C, storage temperature: - 65-150°C
• Where to use: the voltage to 3.3V 800mA DC buck 3.3v voltage regulator is applicable for high-efficiency linear regulator published active power regulator battery charger active instrument

Especificaciones