a MantisTol LVP-230 Cortadora de tablones de vinilo de 9" para pisos de vinilo (quinta actualización)

Descripción

Product description The difference between moving the blade and not being able to move; at L cuts/ U cuts/ Z cuts. MoveAdjust to SPC cutting mode, easy to shallow cut. If necessary to use it on very rigid materials (Rigid Core Vinyl Floor), the cut is better done by making gradual and progressive cuts—Adjust to SPC cutting mode—Only for vinyl flooring that is prone to cracking！ How to cut easily cracked vinyl plank floor - SPC floor ? Each shallow cut is 1/12" deep for spc flooring (2mm deep)；and control your arm strength, Then move the floor for the next shallow cut，the floor won't crack！ Just cut through the surface of the floor ; first paying attention to one end of the blade to land on the workbench and the handle Stops moving downwards！Progressive cutting alleviates sudden cracking of the floor, as the blade does not completely penetrate the floor, relieving its brittleness and keeping it within its toughness range! If necessary to use it on very rigid materials (Rigid Core Vinyl Floor), the cut is better done by making gradual and progressive cuts—Adjust to SPC cutting mode—Only for vinyl flooring that is prone to cracking！Each shallow cut is 1/12" deep for spc flooring; (1~2mm deep)；Easy to control your arm strength ! If the blade holder is suspended and does not reset when the new cutter is opened. Only two positions 1 and 2 will cause the blade holder to hang; please add lubricating oil to the long hole 1 on the side plate-edible oil can also be used; The nut at position 2 may be tightened too tightly!

Características

• ▶La hoja de nuestros cortadores se puede mover.Hay muchas escenas complejas en el sitio de construcción que necesitan cortes especiales (esquinas irregulares, la mayoría de las cuales son columnas, bordes de puertas y esquinas de paredes).Puede ayudarlo a terminar su trabajo sin problemas. ¡lo que le ahorrará mucho tiempo! Producto patentado, ¡todos los derechos reservados!
• ▶Diseño para cortar pisos de tablones de vinilo LVP, WPC, SPC, LVT, VCT, PVC. Se recomienda colocar el cortador en un banco de trabajo o soporte para que no tenga que agacharse mientras trabaja. No para pisos de madera dura, madera o laminados.
• ▶▶If it is found that the 8mm thick floor cannot be cut, please remove the blade and reinstall it, as there are a few blades with gaps during assembly. Reinstalling it will solve this problem. Cutting 8mm thickness is no problem.
• ▶8.9"cutting width and 5/16"（8mm） cutting depth; Translational cutting,the deep of the throat is 115mm/4.5inch.There are spare size bars included in the instruction manual.
• ▶Corte recto, corte en ángulo; Corte "L & U", corte al hilo, corte en ángulo de 0-45° y más. Guía de medición claramente marcada. Fácil de usar y transportar, ¡te gustará! Hoja afilada de acero de tungsteno de 2,2 mm de grosor y 9 pulgadas de largo, incluida una piedra de aceite de grano 600 para mantenerla afilada.
• ▶▶¿Por qué se agrieta el piso que cortas? Debido a que su piso debe ser de tablones de vinilo con núcleo rígido (SPC o RVP), que contiene polvo de piedra, es propenso a agrietarse; ¿Pero cómo cortar sin agrietarse? Ajuste al modo SPC, el corte se realiza mejor haciendo cortes graduales y progresivos. ¡Solo para pisos de vinilo propensos a agrietarse!
• ▶When you are not working; Insert the latch into the side panel keyhole to fix the cam so that it does not work and protects safety away from children.

Especificaciones