AC Motor Speed Controller, 120V 15A Speed Regulator for Brushed Motors | Resettable Overload Protection, LED Display, Adjustable Speed Control, Fits Routers, Drills, Fans, Polishers And Woodworking

Descripción

This AC motor speed controller is for brushed AC motors only. It changes output voltage from 0-120V to adjust motor speed, light brightness, or heater temperature. The LED display shows the current voltage setting. The resettable 15A circuit breaker automatically interrupts power during overload – no fuse replacement needed. Size: 5.5 x 2.4 x 2.25 inches, with a 3-ft power cord and a belt clip. Standard US socket is designed for grounded 3-prong plugs (Type A & B outlets). Works with: Inline duct fans, exhaust fans, routers, drills, angle grinders, polishing machines, incandescent lamps, and resistance heaters. Note: Minimum recommended load: 60W. Some motors may produce a humming sound at low speeds – this is a common characteristic of this type of regulator. If adjustment range appears narrow (only on/off), the connected load may be too small; try a load of at least 60W. Troubleshooting: If the controller does not adjust speed, check that the internal potentiometer connector is fully seated (transportation can loosen it). Do not use with: Brushless motors, DC motors, induction motors, capacitor-run motors, or any device with electronic control boards (e.g. smart appliances, pumps, microwaves, LED lights). Also not for devices with capacitors or electronic components inside. Confirm your device has carbon brushes before purchasing.

Características

• POWER RATINGS & COMPATIBILITY: 110‑120V AC, peak 15A, rated 8A continuous. Resistive loads up to 1800W. Inductive loads (brushed motors) up to 1500W. For brushed motors only – not for brushless, DC, induction, or circuit‑board devices. Motor startup current can be 4-7 times rated current and may trip the 15A breaker; reduce load if needed
• LED VOLTAGE DISPLAY: Turn the dial; the LED meter shows output voltage from 0‑120V. Each setting shows a clear number. After finding a preferred speed for your router, drill, or duct fan, note the voltage shown for later reference
• RESETTABLE OVERLOAD PROTECTION: A 15A circuit breaker cuts power when current exceeds 15A. Flip the reset switch to restore power – no fuses to replace. The ABS shell covers internal components
• COMPACT DESIGN: Measures 5.5 x 2.4 x 2.25 inches with a 3‑ft grounded power cord. Internal contacts support long‑term use. The control knob allows 0‑100% adjustment
• READY TO USE: Comes with a grounded 3‑prong plug that fits Type A and B outlets. A back clip attaches to a belt or tool bag. Plug in, clip on, and operate

Especificaciones