ANYCUBIC Photon P1 14K Resin 3D Printer | Stability Ball Screw, 14K Precision & LighTurbo 4.0, 8000cps Resin Compatible, Large Build Size 8.78x4.96x9.05in

Descripción

Product description Previous page Next page 1 More Stable Printing 2 Increased Print Success Previous page Next page 1 More Resins Compatible 2 Temperature Control Perform Consistently Well The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. wave release Film Wave Release Film Wave Release Film creates a micro-air cushion between the plate and resin during printing, reducing release force by 60% compared to NFEP films. This dramatically increases print success rate and preserves fine details for consistent, high-quality results. The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. The Source of Consistency: LighTurbo 4.0 COB+Aspherical Fresnel Lens Anycubic LighTubro 4.0 combined with Fresnel lenses and front-facing reflectors can reach the light angle within 2°, and light uniformity is more than 92%. 8mm copper tubing enhances heat dissipation efficiency, ensuring stable light source performance with luminous flux deviation ≤5%. Intelligent Assistant 3.0, Press Start & Leave the Rest to the Assistant Intelligent Leveling System 3.0 Factory‌ Calibration - Prints right out of the boxAuto-Leveling Self-Check‌ - Automatically performs bed leveling self-check before printing to ensure optimal platform readiness. Leveling-Assist - Displays real-time force values at four corners for fine-tuning. The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. Intelligent Leveling System 3.0 The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. Intelligent Dynamic Adjustment Intelligent Dynamic Adjustment Dynamic Release 3.0, Monitors real-time layer separation forces to modulate the lift height and speed. This ensures reliable release with every layer, significantly boosting both print success rate and quality.Light-Off Compensation 3.0: Dynamic, Calculates resin flow-back rate and dynamically adjusts the light-off duration to precisely prepare each layer for exposure, ensuring optimal speed and efficiency. Intelligent & AI Inspection: Double-Checked The new AI detection feature in Smart Detection can be applied to build plate installation checks and base separation detection scenarios. This prevents printing failures caused by platform installation issues and promptly identifies model detachment from the base, reducing wasted time. Additionally, resin level detection and residue detection in the resin tank ensure rsuccessful 3D printing. The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. Intelligent & AI Inspection: Double-Checked Previous page Next page 1 Resin Drip Hanger 2 Effortless Function 3 Quiet Printing 4 New Version Slicer 5 Print Model Library What types of 3D resin can the Photon P1 print? The Photon P1 supports a variety of industrial-grade resin materials, with a maximum compatible resin viscosity of 8000cps. It is compatible with all resins of Anycubic Print model does not stick to the build plate 1. Clean dirty/oily build plate. 2. Adjust resin settings via listing image (for our resins). 3. Re-level build plate. The above are some troubleshooting steps, for further assistance, please refer to the product manual. What is the maximum USB flash drive capacity supported by the Photon P1? It is recommended to use a USB drive with a capacity of 128GB or less. How many different colors or material types can the Photon P1 print simultaneously? The Photon P1 supports single-color, single-material printing. Add Anicubic's new dual-material printing kit for simultaneous two‑material, two‑color printing.

Características

• 【Sturdy Structure, No Wobble】 Anycubic Photon P1 employs stable ball screws and precision guide rails, combined with a precision-engineered print platform, to create a stable printing structure. This effectively minimizes motion vibration, enabling smoother lifting and lowering, ensuring flawless detail accuracy
• 【Easy Release, Higher Success Rate】The Wave Release Technology generates micro-airflow during plate lifting, reducing release force by 60%. 3D Models detach more easily, lowering failure rates and ensuring reliable long-term printing
• 【Ready to Print, Auto-Leveled】Smart Leveling 3.0 of Photon P1comes factory-calibrated, performs automatic self-check before each print, and provides real-time pressure feedback across four corners for fine-tuning. No need more manual bed leveling and just focus on creating
• 【AI Monitoring for Worry-Free Printing】The AI-powered inspection system performs dual verification of build plate installation and bottom layer separation. Integrated with resin level monitoring and residue detection in the vat, it identifies potential issues early, ensuring reliable printing every time
• 【Print Industrial Resins Instantly】Anycubic Photon P1 can handle ultra-high viscosity resins with a viscosity up to 8,000 cps, which is 40 times that of standard resins, meeting the demands of advanced creator. Pre-configured settings for Anycubic resins allow you to start printing right out of the box with no manual calibration
• 【14K Precision, Crisp Details】Photon P1 is equipped with a 10.1-inch 14K high-precision mono LCD screen with a resolution of 13,312 x 5,120 pixels and an XY pixel size of 16.8 x 24.8 micrometers. It can print with a minimum aperture of 0.3 millimeters, enabling outstanding reproduction of fine details

Especificaciones