Impresora 3D Snapmaker U1, 4 cabezales de herramientas con cambiador de herramientas de 5 segundos, impresión multicolor y de múltiples materiales, 5 veces más rápido y 5 veces menos desperdicio, calibración inteligente, velocidad CoreXY de 500 mm/s, tamaño de construcción grande de 270 x 270 x 270 mm

Descripción

Product description What Can You Do with Snapmaker U1? Previous page Next page How Much Can You Save with Snapmaker U1? Previous page Next page How Easy Is Snapmaker U1 to Use? Previous page Next page Multi Material & Mixed Material Printing Previous page Next page Why Snapmaker U1 is the Leading Toolchanger 3D Printer? Switch Filaments in 5 Seconds with SnapSwap Most printers rely on filament changers to switch between colors or materials, spending more time purging than actually printing. With four toolheads preloaded and pre-heated with their own filaments, the SnapSwap system lets the U1 switch by simply swapping the toolheads, cutting your wait time from approximately two minutes to only five seconds[2]. The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. switch filament in 5 seconds No More Purging for Color Change Filament-changing printers "purge" by wasting perfectly good filament—pushing one color through the nozzle until the last trace of the old one is gone. The U1 doesn't play that game. It only purges the tiny amount of filament that's actually degraded by the time a new print job begins, or during flow-rate calibration, cutting waste by up to 80%[3] on every print. The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. No More Purging Rock-Solid & Precise Locks The U1 uses steel-ball kinematic couplings to click each print head into perfect position, then locks it securely—no screws, no magnets, no extra motors. Locked fast, rock solid, tested over 1,000,000 swaps with zero failures. The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. Rock-Solid & Precise Locks Less Waste Means Serious Savings So. Much. Waste. On other 3D printers, printing a multi-color model leaves behind a mountain of garbage—often wasting 3 or 4 times more material than what ends up in the actual model! U1 avoids the waste with smart tool swapping, saving filament, saving money, and even saving the environment. The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. Less Waste Means Serious Savings Previous page Next page 1 Toolhead Calibration 2 Vibration Compensation 3 Fine-tuned Extrusion 4 Perfect First Layer Specification and FAQs Previous page Next page

Características

• 【4-Toolhead System with 5-Second Tool Changer】 Powered by the SnapSwap system, Snapmaker U1 multi-color 3D printer features four independent toolheads with filaments preloaded and preheated, enabling true multi color printing without manual filament swaps or purging. The automatic tool changer reduces tool change time from around 2 minutes to just 5 seconds. Its robust locking mechanism has been validated through over 1,000,000 swaps with zero failures, making it easier and faster to create functional parts, detailed prototypes, and finished models in a single print.
• 【5X Faster Printing, 5X Less Waste】 Unlike traditional filament-changing systems, Snapmaker U1 3D printer swaps toolheads instead of repeatedly loading, unloading, and purging filaments. This minimizes wasted material during filament changes, reducing filament waste by up to 5X and enabling up to 5X faster multi-color and multi-material printing. Printing with Snapmaker U1 means less waste, lower operating costs, and higher productivity for makers, workshops, small businesses, and professional creators.
• 【True Multi-Material & Mixed-Material Printing】 Snapmaker U1 3D printer combines rigid and flexible materials, water-soluble supports, and engineering materials in a single print. Create functional parts, multi-color articulated models with easy-to-remove or soluble supports, and even colorful shoes using TPUs with different Shore hardness ratings. Four independent toolheads automatically switch between materials with no manual intervention. Compatible with PLA, PVA, TPU, PETG, PCTG, ABS, ASA, PA, PC, and more for greater design freedom and more capable prototypes and end-use parts.
• 【Smart Calibration】 Automatic toolhead offset calibration, vibration compensation, fine-tuned extrusion, and perfect first-layer work together to deliver smooth, dimensionally accurate and reliable print quality with minimal manual adjustment.
• 【Easy to Use for Beginners & Professionals】 With a built-in model library, Snapmaker Orca — custom open-source slicing software, makes it easy to get started with 3D printing. Combined with automatic filament management, AI-powered print monitoring, a 3.5-inch touchscreen, and remote app control, Snapmaker U1 simplifies every step from setup to finished print, making it suitable for beginners, hobbyists, or professionals. Snapmaker U1 includes a one-year warranty.
• 【500 mm/s High-Speed CoreXY Printing】 A rigid CoreXY motion system with lightweight carbon fiber X-axis rails enables speeds up to 500 mm/s while maintaining accuracy and stability across the full 270 X 270 X 270 mm large build volume.

Especificaciones