AUTOOL Multimeter Oscilloscope Automotive TRMS Digital Multimeter and Oscilloscope Kit 1000V 20A, with Test K line & CAN Bus Signal, Sensor Signal, Relay Test, Ignition Pulse Signal Test

Descripción

Product description Previous page Handheld oscilloscope has a 500kHz bandwidth. One-button automatic display of the measured waveform. Select the engine cylinder type and ignition and calculate the speed of different engine cylinders. The measurement needs to be connected to a valid signal source with a voltage greater than 1V. Next page 1 Multimeter 2 Oscilloscope 3 Ignition Diagnostic 4 1Hz~1MHz Signal Frequency 5 Wire Instructions Previous page Cranking Test Vehicle start test detects that the minimum battery voltage is higher than 9.6V, for the normal state, if the minimum voltage is detected below 9.6V, then there may be battery aging Fuel Injector Testing The multimeter can test injectors as well as detect real-time signals from injectors. It can test electromagnetic injectors, including GDI injectors, but does not support 120V injectors. Analog Signal Test The multimeter can simulate the output of basic 5V square wave and 5Vpp sine wave signals, and can also be connected to a battery to obtain a 12V square wave signal Auto Range Function Automatically displays the measured data, saving the tedious process of manually selecting the range of measured values True-RMS Multimeter Automatically ranging true mean squared (TRMS) technology for increased accuracy. Next page Previous page Adjustable 1-30 minutes sleep time,key tone and screen brightness,warning tone cannot be turned off Upgrade multimeter application via SD card The colorful display screen with backlight is for clearer reading and flashlight for dark enviroment Comply with GB4793.1, IEC61010, CATIII 600V, CAT II 1000V safety standards and pollution level 2 Comes with a test lead, ignition signal detection cable, folding stand and carrying case Next page 1 Adjustable Settings 2 Software Upgrade 3 2.8inch Large Screen 4 Safety Rating 5 Full configuration Multimeter with Oscilloscope Series Multimeter Oscilloscope DM303 Multimeter Oscilloscope DM301 Multimeter DM202 Main Function multimeters,oscilloscopes,start,injector,relay,analog signal,ignition pulse test Main Function voltage,current,resistance,frequency,diode,oscilloscope,ignition pulse test Main Function voltage,current,resistance,frequency,diode Detection Line versatile lead,battery clip,ignition signal/car circuit lead,jumpers,test leads Detection Line ignition signal test line,test leads Detection Line test leads Measuring Range AC700V/DC1000V, 20A/200mA, 1 MΩ, 1Hz-1MHz Measuring Range AC700V/DC1000V, 20A/200mA, 1 MΩ, 1Hz-1MHz Measuring Range AC600V/DC600V, 9.999A/999.9mA, 40 MΩ, 40Hz-1kHz

Características

• 【More Powerful Detection Range】The multimeter can accurately measure AC/DC voltage, resistance, continuity, AC/DC current, capacitance, frequency, diodes, duty cycle and fire wire. DC voltage 0 ~ 1000V, AC voltage 0 ~ 700V, DC/AC Current 0 ~ 20A, 0 ~ 200mA, Resistance 0 ~ 1MΩ, Frequency 1 ~ 1MHZ, Continuity circuit test and ignition signal test to meet all test requirements.
• 【Oscilloscope Fuction】Waveform test bandwidth of 500KHZ, using variable sampling frequency, can measure slowly changing signal, suitable for automotive maintenance to measure and observe various signal quantities on automotive circuits, including motor drive signals, motor power voltage on electric vehicles, ignition signals, camshaft signals, crankshaft signals, wheel speed sensor signals, oxygen sensor signals, etc. of fuel car engines.
• 【Auto Range & Ture RMS】Simply select the mode and connect your leads. The multimeter will automatically select the appropriate measurement depending on what it detects. With True RMS, the DM301 portable multimeter provides you with the clear, accurate readings whenever and wherever you need them.
• 【Wiring Functions】Equipped with 8 wiring lines for different functions. They are multi-function test line, battery clip line, ignition pulse signal test line, car circuit test line, jumper and multimeter probe. The multi-function test line is used to test the battery voltage, test the fuel injector and relay, test the K-wire and CAN bus signal, test the car ECU, and test the car parts.
• 【Starting Test & Analog Signal Test】The multimeter tester can be used to evaluate the battery's starter system and determine if the 12V electrical system is producing enough power to start the engine. The multimeter also outputs 5V square wave and 5Vpp sine wave signals. Output Signal Frequency: 1Hz~10KHz Duty Cycle: 10%~90.
• 【2.8 inch Colorful Screen】Color display screen with backlight for clear reading. Built-in flashlight for dark environments. Adjustable screen brightness, button sound and sleep time to meet your various needs and various working environments, making your measurements more convenient.
• 【Three Years Warranty】For any quality problems. If DM303 has any defect, we will provide new replacement or solutions for our customers without delay, and provides lifetime technical support. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.

Especificaciones